Knape And Vogt USC15-2-35PT Double Bin Pull-Out

Knape and Vogt USC15-2-35PT identifies a 14-13/16 inch wide platinum bottom mount waste pullout with two 35 quart platinum bins, so it organizes a base cabinet opening into a defined double-bin waste station. The unit is part of the KV USC Series, which is described as KV's premium line of soft close trash pull-outs, so it delivers a soft-close action that pulls waste and recycling smoothly back into the cabinet. A unique washable solid backsplash and solid floor prevent debris from falling through to the floor, which keeps the cabinet bottom cleaner over time. The solid floor is also easy to clean, so routine maintenance is straightforward after liners or bins are removed. Decorative accent rail on the unit can be customized to match countertops, so a shop can visually coordinate the pull-out with surrounding surfaces. Weight capacity is 30 pounds maximum per bin, not to exceed 100 pounds of total weight, so loading can be planned within those limits.

Key Details That Support Daily Waste Management

• The soft close trash pull-out function in the KV USC Series brings the bins back into the cabinet without slamming, which helps reduce impact on the cabinet frame during everyday use.
• The platinum finish on the bottom mount frame and bins provides a neutral, modern tone, which works well in many kitchen and bath cabinet layouts without drawing attention when the door is open.
• The unique washable solid backsplash stops debris from dropping behind the bins, which keeps the rear of the cabinet cleaner and reduces time spent clearing hard-to-reach areas.
• The solid floor under the bins prevents debris from falling through to the cabinet floor, which protects the base from mess build-up and simplifies cleanup with a quick wipe-down.
• The decorative accent rail can be customized to match countertops, which allows the installer or shop to align the look of the pull-out with the overall design of the work surface.
• The heavyweight ball bearing slides are concealed, which supports smooth movement while keeping the slide hardware out of sight for a cleaner interior cabinet appearance.

Bottom Mount Trash Pullout Installation Workflow

This bottom mount trash pullout is described as a bottom mount trash pullout, so it anchors to the cabinet floor to establish the slide path relative to the opening. All KVUSC Series units are said to come fully assembled and install with four screws, so installation centers on positioning the frame and setting four mounting points instead of building the unit from separate components. Double bin units are 14-13/16 inch wide, so designers and installers can size the cabinet opening and clearances around that fixed width when laying out base cabinets or retrofitting an existing opening. Door mount brackets are built into the frame, so the cabinet door can be fastened directly to the pull-out structure to create an integrated door-and-bin movement when the door is opened or closed.

Using The Double 35 Quart Waste Pull-Out In Cabinets

Where The Platinum 35 Quart Bins Fit Best

This double bin trash pull-out uses two 35 quart platinum bins, so it establishes a pair of mid-capacity containers for waste or recycling inside a base cabinet. Double bin units being 14-13/16 inch wide means the assembly fits cabinets that can accommodate that width with room for the door mount brackets and side clearances, so it suits single-door base cabinets planned around that measurement. The product sits in the Kitchen & Bath Cabinet Accessories and Trash Pull-Outs category, so it is aligned with kitchen and bath base cabinet applications where hidden waste storage is required. With the bottom mount configuration, the frame rests on the cabinet floor, so the vertical load from up to 30 pounds per bin is carried directly down into the cabinet base. The maximum total weight rating of 100 pounds gives an upper limit across the frame and slides, so the installation can be used confidently within those specified loading values.

Details That Support Smooth, Repeatable Operation

The heavyweight ball bearing slides are concealed for a clean look, so they provide guided movement while leaving the interior appearance focused on the bins and decorative rail instead of exposed slide hardware. As part of KV's premium line of soft close trash pull-outs, the USC Series incorporates a soft-close mechanism that draws the unit quietly into the cabinet, so repetitive openings in busy kitchens or bath spaces place less stress on the cabinet face. The unique washable solid floor beneath the bins keeps stray debris on a defined surface, so bins can be lifted out and the floor quickly wiped to restore a clean base. The solid backsplash at the rear prevents scraps from dropping behind the unit, so the space behind the frame remains clearer and less prone to buildup over long-term use. Door mount brackets built into the frame tie the cabinet door directly to the pull-out, so the door and bins move together, providing a consistent feel each time the door is operated.

Common Questions About This Knape And Vogt Pull-Out

Selecting This Soft Close Trash Pull-Out For Projects

This soft close trash pull-out provides two 35 quart bins in a 14-13/16 inch wide, platinum bottom mount assembly, so it supports double-bin waste management in a defined cabinet footprint. With heavyweight ball bearing slides that are concealed, installers can deliver smooth operation and a clean interior look. The washable solid backsplash and solid floor keep debris confined to accessible surfaces, so long-term cabinet cleanliness is easier to maintain. For projects requiring a premium soft close double bin solution with door mount brackets built into the frame, this Knape and Vogt USC15-2-35PT configuration aligns well with kitchen and bath cabinet waste pull-out needs.