
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Festool 495388 laminate saw blade is a 10-1/4 inch diameter circular saw blade with a 30mm arbor and 60 tooth ATB configuration, so it delivers fine, controlled cuts that suit precise woodworking setups. The blade is described as universal and general purpose, which means one blade handles a range of tasks without constant blade changes during a project. Its design is specified as a fine rip cut blade for glue ready joint, so the cut surface is prepared for joints where tight seams are important. The blade is carbide tipped with an alternating top bevel tooth pattern, so it maintains cutting performance while working through wood and soft plastics. This blade is identified as a laminate saw blade, which focuses it on clean cutting results where surface quality is important. The manufacturer specifies that it is for use with FJ561287 (KS 120 EB) only, which directs it to a defined saw setup.
The Festool 10-1/4 inch saw blade with 30mm arbor is dimensioned for the FJ561287 (KS 120 EB), so the blade centers correctly on the saw shaft. The 60 tooth count with ATB geometry establishes a cutting pattern that balances material removal with surface finish, so workflow can favor cleaner edges on wood and soft plastics. The product is classified in the saw blades category for table and radial arm use, which ties it to stationary or guided cutting setups where controlled, repeatable cuts are important. Being identified as a general purpose and universal blade, it addresses a range of routine shop cuts, so one setup can stay in place through multiple steps of a project.
This Festool 495388 laminate saw blade is placed in the product class of circular saw blades and in the category of saw blades for table and radial arm applications, so it is oriented toward saw stations that guide the material for accurate lines. The 10-1/4 inch diameter with 30mm arbor specification sets the interface with the saw, so the blade sits on equipment aligned with that arbor dimension. The description lists use on wood and soft plastics, so shops working with these materials can apply the blade to standard cutting tasks across panels and components. The blade is also described as a laminate saw blade, so it aligns with work where surface appearance and edge cleanness on laminate-style projects are significant for the finished result.
The Festool 60 tooth ATB blade geometry shapes the cut as fine and controlled, so edges move toward glue ready joint quality as stated. The description notes the blade as universal and general purpose, so one setup can support crosscuts and rip cuts on the specified materials without constant configuration changes. The fine rip cut blade designation focuses the tooth layout on leaving a surface that supports glue joints, so joinery steps benefit from reduced edge preparation. Carbide tipped construction paired with alternating top bevel teeth provides a cutting edge pattern that stays active across wood and soft plastics, so day-to-day work can maintain the specified clean cutting behavior. The note specifying use with FJ561287 (KS 120 EB) only directs the blade toward that saw system, so users of that setup can select this exact part number when a laminate-oriented, general purpose blade is needed.
The Festool 495388 laminate saw blade is noted for use with FJ561287 (KS 120 EB) only, so it is intended for that specific Festool saw configuration in table or guided style setups.
The Festool 495388 blade is described for use on wood and soft plastics, so it addresses standard shop materials where clean, controlled cuts are important.
The Festool 495388 fine rip cut blade is described as leaving a glue ready joint surface, so edges are prepared for tight joints without heavy additional edge work.
The Festool 495388 blade uses a 10-1/4 inch diameter and 30mm arbor, so it mounts to saws designed around that arbor size, particularly the referenced FJ561287 (KS 120 EB).
The Festool 495388 is described as a universal, general purpose saw blade, so it handles a range of cuts on the specified materials instead of being limited to a single narrow task.
The Festool 495388 blade uses carbide tipped, alternating top bevel teeth, so the cutting edges support the stated clean cutting behavior on wood and soft plastics.
The Festool 495388 laminate saw blade combines a 10-1/4 inch diameter, 30mm arbor, and 60 tooth ATB layout, so it aligns with FJ561287 (KS 120 EB) setups needing general purpose, clean cutting. Its description as a universal saw blade for wood and soft plastics gives shops a single blade suited to varied cuts while targeting fine rip cut performance for glue ready joints. For work that values clean edges on laminate-oriented projects using the specified saw, this blade offers a defined match between part number and application.
Sold In: 1 Each