
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Salice S Type soft-close adapter is a EURO Smove soft close piston designed as a hinge attachment for soft-close hinge mounting applications with medium tension. This soft-close adapter mounts after hinge installation, so it can be added during hardware upgrades without disturbing the existing hinge layout or door position. The S type soft-close device contacts and connects to the hinge flange, not to the door, which keeps the door surface free from contact marks during repeated closing cycles. As a hinge attachment soft-close adapter in the soft-close adapters class, it works directly at the hinge, so the motion control is located at the hardware pivot point for consistent closing action. The medium tension setting provides balanced resistance suited to typical cabinet door weights where a controlled, damped close is needed.
This hinge mounting soft close device is a soft-close adapter intended for hinge mounting applications, so it works within standard hinge layouts rather than requiring separate dampers on the cabinet frame. Type S Smove soft closing devices are available in three tension settings - light, medium and high resistance - and this model is the medium tension version, which supports jobs that call for moderate damping on the door swing. Adjustable closing speed with the turn of the adjustment screw means the damping response can be tailored during installation, allowing fine tuning after the door is hung. The design does not interfere with hinge adjustments, so standard vertical, horizontal, and depth tweaks on suitable hinges remain available for final alignment.
This EURO Smove soft close piston from Salice America is used in hinge mounting applications where a soft-close function is needed on cabinet doors. The S type soft-close device contacting the hinge flange suits installations that prioritize keeping the door panel untouched by added hardware contact. Type S Smoves require a separate mounting block to attach the soft close device to the hinge flange, so it fits projects using hinge plates prepared to accept those mounting blocks. Mounting blocks are available in four heights to accommodate full overlay, half overlay and inset hinge configurations, which supports a range of cabinet construction styles. Mounting blocks come in two types - one designed to affix to die-cast hinge plates and the second designed to affix to stamped steel mounting plates - so this adapter integrates into both common hinge plate materials in cabinet work.
The medium tension configuration of this hinge attachment soft-close adapter provides a defined resistance level, helping installers achieve consistent soft closing across doors of similar size and weight within a project. Because the S type soft-close device connects to the hinge flange rather than the door, the soft-close action is generated at the mechanical joint, which supports repeatable motion as the hinge cycles. Adjustable closing speed with the turn of the adjustment screw allows onsite tuning, so doors can be set to close at a pace suited to cabinet use, reducing rebound and improving final closure. The low profile design that does not intrude on cabinet interior space supports storage layouts, since the device sits within the hinge zone rather than extending into shelf or pull-out clearance paths. Only one Smove required per door streamlines planning, because each door is matched to a single adapter and corresponding mounting block, simplifying counting and layout.
The hinge attachment soft-close Salice S Type soft-close adapter is designed for hinge mounting applications, so it serves cabinet and similar hinged door projects using compatible hinge plates.
The EURO Smove soft close piston mounts to the hinge flange using a separate mounting block, so the device works directly with the hinge hardware rather than the door panel.
The S type soft-close device contacts and connects to the hinge flange, not the door, so closing forces act on hardware surfaces and avoid marring the door finish.
The soft-close adapter is described as not interfering with hinge adjustments, so typical hinge alignment movements remain available after the piston is installed.
Only 1 Smove required per door, so each hinged door is served by a single soft-close device acting at the hinge area.
The EURO Smove soft close piston has adjustable closing speed with a turn of the adjustment screw, allowing the installer to set the door closing rate on site.
The hinge attachment soft-close Salice S Type soft-close adapter in medium tension provides a EURO Smove soft close piston tailored for hinge mounting projects that need adjustable, low profile damping. With flange contact, adjustable closing speed, and one Smove required per door, it supports efficient cabinet door upgrades. The need for separate mounting blocks matched to die-cast or stamped steel hinge plates and to specific overlay or inset configurations defines how it integrates into a given hinge setup. For cabinet work calling for soft-close action at the hinge, this medium tension soft-close adapter offers a targeted option.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | UBDARX99 Mfr# DARX99 | Smove Adapter Plate for 3/8" Half Overlay Die-Cast Steel Hinge with Arm 9 | ||||
Sold in: 1 Each | UBDARX59 Mfr# DARX59 | Smove Adapter Plate for 1/2" Overlay Die-Cast Steel Hinge with Arm 5 | ||||
Sold in: 1 Each | UBDARX09 Mfr# DARX09 | Euro Smove Mounting Adaptor for BAR Hinge | ||||
Sold in: 1 Each | UBD2VXP9 Mfr# D2VXP9 | Smove Adapter Plate for Inset Stamped Steel Hinge with Arm 17 | ||||
Sold in: 1 Each | UBD2VX99 Mfr# D2VX99 | Smove Adapter Plate for 3/8" Half Overlay Stamped Steel Hinge with Arm 9 | ||||
Sold in: 1 Each | UBD2VX59 Mfr# D2VX59 | Smove Adapter Plate for 1/2" Overlay Stamped Steel Hinge with Arm 5 | ||||
Sold in: 1 Each | UBD2VX09 Mfr# D2VX09 | Euro Smove Mounting Adaptor for BAV Steel | ||||
Sold in: 1 Each | UBD0SHSNG Mfr# D0SHSNG | Light Tension Smoveholder with Type S Adjustable, Black | ||||
Sold in: 1 Each | UBD0S9SNG Mfr# D0S9SNG | High Tension Smoveholder with Type S Adjustable, Beige |