
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Euro Smove mounting adaptor for BAR hinge is a Salice America soft-close adapter designed to work with type "S" Smove soft closing devices, so hinge-based damping can be added to existing hinge layouts. This adaptor is part of the soft-close adapters product class, so it connects a type "S" Smove device to the BAR hinge flange instead of the door, helping protect finished door surfaces in day-to-day operation. Because the adaptor is intended for use after hinge installation, it allows a soft-close upgrade without changing hinge positions, which supports consistent reveals across a run of doors. The adaptor configuration keeps the soft-close function tied to the hinge hardware, so the door can move freely while still benefiting from the controlled closing action of the Smove device in normal cabinet use.
The web description notes that type "S" Smove soft closing devices attach to the hinge flange using a separate mounting block, so the adaptor serves as the link between the hinge hardware and the soft-close unit in the hinge area. Because mounting blocks are available in four heights to accommodate full overlay, half overlay, and inset hinge configurations, the same basic Smove concept can be applied across different door applications while still aligning with the hinge flange. The description also explains that mounting blocks come in one type designed for die-cast hinge plates and another type designed for stamped steel mounting plates, so the adaptor system supports different plate constructions while still positioning the Smove device at the hinge location for consistent closing performance.
The SAP description identifies this product as EURO SMOVE ADAPTER, and the web description specifies that it works with type "S" Smove soft closing devices, so its role is to connect the damping unit into a European hinge layout. Because type "S" Smove devices require a separate mounting block to attach the soft-close device to the hinge flange, this adaptor operates in the hinge zone rather than on the door edge, which keeps the cabinet interior cleaner in appearance. The web description further states that mounting blocks are available in four heights to accommodate full to half overlay and inset hinge configurations, so the same Smove approach can be applied across a mix of door conditions on a project. With mounting blocks offered in one type designed to affix to die-cast hinge plates and another type designed to affix to stamped steel mounting plates, the adaptor concept spans different plate constructions often found across hinges in the same shop.
The web description notes that the adaptor does not interfere with hinge adjustments, so once the door is aligned for overlay, depth, and side gap, the soft-close function can be added without changing those settings, which reduces rework during installation. The description highlights a low profile design that does not intrude on cabinet interior space, so interior components, storage, and contents remain clear of the hardware, supporting predictable door swing and interior use. Adjustable closing speed with the turn of an adjustment screw means the installer can regulate the final closing action to suit door weight and customer preference while keeping the same hinge and mounting block combination. The note that only one Smove is required per door simplifies layout for multiple doors on a run, since each opening can be planned around a single damping point at the hinge. Because the soft-close device contacts and connects to the hinge flange instead of the door, the damping load stays on the hinge system, which helps preserve the door surface finish as doors are opened and closed throughout normal cabinet service.
Euro Smove mounting adaptor for BAR hinge is a Salice America soft-close adapter in the soft-close adapters product class, so it links a type "S" Smove soft closing device to a compatible hinge layout.
The web description explains that the type "S" soft-close device contacts and connects to the hinge flange, not the door, so damping forces act through the hinge hardware rather than the door surface.
The description states it is easy to mount after hinge installation, so it can be added to an existing hinge setup while leaving hinge locations and alignment unchanged.
The web description notes that the adaptor does not interfere with hinge adjustments, so overlay, depth, and side gap settings remain available as on a standard hinge configuration.
The description confirms adjustable closing speed with a turn of the adjustment screw, so the final closing rate can be tuned without changing hinges or plates.
The description notes mounting blocks in four heights for full to half overlay and inset, with one style for die-cast hinge plates and another for stamped steel mounting plates.
Euro Smove adapter is described as easy to mount after hinge installation, so it suits retrofit or upgrade work where the hinge layout is already set. With the soft-close device contacting the hinge flange instead of the door, and with adjustable closing speed by screw, it supports controlled, surface-friendly closing action across different overlay and inset configurations. Using mounting blocks sized for die-cast or stamped steel plates, this adaptor ties the type "S" Smove soft closing device into the hinge area, helping deliver predictable damping on cabinet projects planned through Wurth Baer Supply.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | UBDARX99 Mfr# DARX99 | Smove Adapter Plate for 3/8" Half Overlay Die-Cast Steel Hinge with Arm 9 | ||||
Sold in: 1 Each | UBDARX59 Mfr# DARX59 | Smove Adapter Plate for 1/2" Overlay Die-Cast Steel Hinge with Arm 5 | ||||
Sold in: 1 Each | UBD2VXP9 Mfr# D2VXP9 | Smove Adapter Plate for Inset Stamped Steel Hinge with Arm 17 | ||||
Sold in: 1 Each | UBD2VX99 Mfr# D2VX99 | Smove Adapter Plate for 3/8" Half Overlay Stamped Steel Hinge with Arm 9 | ||||
Sold in: 1 Each | UBD2VX59 Mfr# D2VX59 | Smove Adapter Plate for 1/2" Overlay Stamped Steel Hinge with Arm 5 | ||||
Sold in: 1 Each | UBD2VX09 Mfr# D2VX09 | Euro Smove Mounting Adaptor for BAV Steel | ||||
Sold in: 1 Each | UBD0SHSNG Mfr# D0SHSNG | Light Tension Smoveholder with Type S Adjustable, Black | ||||
Sold in: 1 Each | UBD0S9SNG Mfr# D0S9SNG | High Tension Smoveholder with Type S Adjustable, Beige | ||||
Sold in: 1 Each | UBD0S8SNG Mfr# D0S8SNG | Hinge Attachment Soft-Close Salice S Type Soft-Close Adapters for Hinge Mounting Applications Medium Tension |