Rev-A-Shelf 597 Chrome 3/4" Tray Organizer, LD-597-12CR-10

Choose a Rev-A-Shelf tray organizer

Rev-A-Shelf tray organizer is a metal cabinet organizer designed to separate and store trays, cutting boards, and similar items in a cabinet. The Rev-A-Shelf 597 Series divider in this listing is a chrome wire tray divider with a 12 inch height and bulk pack quantity of 10. Rev-A-Shelf describes these RS597 Series products as single piece dividers that mount with four screw-on clips per divider, and the screws and clips are included. For buyers comparing tray organizer for cabinets options, this rev a shelf divider gives a straightforward wire format for vertical separation inside cabinet spaces. It fits within the broader category of cabinet pull-out systems and base cabinetry organizers, but this product itself is a fixed divider rather than a sliding unit.

See cabinet tray divider buying advantages

• Rev-A-Shelf 597 Series tray divider - gives buyers a defined product family for matching additional dividers in the same style.
• Chrome wire construction - provides a clean wire divider format for separating trays, platters, and boards inside cabinets.
• 12 inch height - helps buyers plan vertical storage around shorter cabinet interiors or lower-profile items.
• Single piece divider design - simplifies selection because each divider is one complete unit rather than a multi-part assembly.
• Four screw-on clips per divider - gives each cabinet tray divider a clear mounting method for cabinet installation.
• Screws and clips included - reduces the need to source basic mounting hardware separately before install.
• Bulk pack of 10 - supports shop, multi-cabinet, or repeat installation work where several dividers are needed at once.
• Rev-A-Shelf metal tray divider format - works well for buyers organizing trays vertically to improve access and reduce stacked items.

Confirm cabinet tray divider fit details

Key specs to confirm: This chrome wire tray divider is listed as a Rev-A-Shelf 597 Series divider with a 12 inch height and bulk pack of 10. Before ordering, confirm your cabinet interior width, depth, and usable height, because the exact divider width and clip spacing are not provided here. Buyers should also confirm the mounting surface inside the cabinet and the spacing needed between dividers for trays, cutting boards, or baking sheets. If you need load, compliance, safety, or other technical ratings, those details are not provided in the verified product data and should be confirmed with the manufacturer or technical documentation.

What's included: Verified included items are the single piece dividers, four screw-on clips per divider, and screws and clips for mounting. This listing is the bulk pack of 10 dividers.

What to verify before ordering: Confirm cabinet interior dimensions, how many divider lanes you want, the spacing needed for your stored items, and whether a 12 inch divider height is right for your cabinet and tray sizes. Also confirm that you want the chrome finish and bulk pack quantity.

Use a base cabinet organizer effectively

Match tray organizer use to storage needs

A base cabinet organizer like this Rev-A-Shelf 597 tray divider is commonly used when trays, platters, baking sheets, and cutting boards are stacked flat and hard to reach. In many kitchens, a stack of wide items creates friction during daily use because one piece must be lifted out before another can be accessed. A cabinet tray divider changes that storage pattern by creating vertical slots so each item can be stored on edge with clearer separation.

This product is a chrome wire tray divider, so it is aimed at buyers who want a simple metal divider format rather than a wood partition or a moving rack. The verified product data identifies it as a single piece divider, which matters during planning because installers can lay out each divider position based on the items being stored. The included screw-on clips provide the mounting method, and Rev-A-Shelf specifies four clips per divider. That gives installers a defined hardware count to plan around before starting the job.

For a shop, contractor, or cabinet professional buying revashelf parts in volume, the 10 pack format can make sense when several cabinets need matching tray organizer for cabinets layouts. It can also help when a project includes multiple vertical storage sections in one pantry or base cabinet run. Serious DIY buyers may also prefer a bulk pack if they are outfitting more than one cabinet at the same time.

The key fit question is cabinet interior space. The verified data gives the 12 inch height, but it does not provide divider width, exact wire profile, or recommended spacing between dividers. Buyers should measure the interior carefully and decide how many slots are needed for their trays or boards. If your stored items are tall, unusually wide, or thick, confirm that the cabinet opening and planned divider spacing will support easy insertion and removal. Follow manufacturer installation guidance and local building requirements where applicable.

Compare metal tray dividers for install confidence

When buyers compare metal tray dividers, the most useful differences are usually mounting style, included hardware, finish, pack quantity, and whether the divider is a single piece or part of a larger assembly. This Rev-A-Shelf tray organizer is clearly described as a single piece divider in the 597 Series, and it includes screws and clips. That gives a straightforward starting point for installers who want to know how the cabinet tray divider mounts without assuming extra hardware is required.

Another practical comparison point is finish. This listing is the chrome version, which helps buyers match existing cabinet accessories or select a wire look that fits the project. The verified web description also notes that the 597 Series is available in white or chrome finishes and in 12 inch and 18 inch heights, so buyers working across several cabinets can confirm whether they need this 12 inch chrome configuration or another verified series option.

Pack size also matters. A single divider may suit a small repair or one-off cabinet update, while a bulk pack can be more practical for a larger install schedule. This listing is the bulk pack of 10, and the product data states that bulk packs are sold in full boxes only. That is useful for planning material counts before ordering.

Because exact dimensional details beyond the 12 inch height are not provided here, the safest comparison step is to verify cabinet measurements and installation layout before purchase. Buyers choosing among cabinet pull-out systems and divider products should also note that this item is a fixed tray divider, not a sliding pull-out frame. That distinction helps avoid ordering the wrong product type for the intended cabinet function.

Ask fit questions about tray organizers

Order a chrome wire tray divider

chrome wire tray divider is a practical choice when you need fixed vertical separation for trays and boards inside a cabinet. This Rev-A-Shelf 597 Series listing gives you the 12 inch height, chrome wire finish, and bulk pack of 10, plus included screws and screw-on clips for mounting. Before purchase, confirm your cabinet interior dimensions, the spacing you need between dividers, and whether this fixed cabinet tray divider format matches your storage plan. That helps you order the right quantity and avoid fit issues at installation.