Rev-A-Shelf sink tip out tray gives you a dedicated tip-out storage tray for the false-front area at a sink cabinet. This white sink tip out tray is the Rev-A-Shelf LD6591 Series model LD-6591-24-11-1, made as a self-close sink tip out tray set with one deluxe tray and one pair of 45 degree hinges. For buyers replacing an older sink tip out tray kit or specifying new sink tip out tray hinges, this set provides a 24 inch sink tip out tray format with a slim 2-1/8 inch depth and 3-3/16 inch height. Rev-A-Shelf lists this tray in the Lazy Daisy Series and identifies it as a plastic sink tip out tray with no tab stop. The deluxe tray includes a ring post and a molded soap dish in the tray bottom.
Key specs to confirm: This sink tip out tray is a Rev-A-Shelf LD6591 Series white plastic tray measuring 24 inches long, 2-1/8 inches deep, and 3-3/16 inches high. It is sold as a self-close sink tip out tray set and uses one pair of included 45 degree hinges. Before ordering, confirm that your sink cabinet false front can accept a 24 inch sink tip out tray and that the available space behind the panel supports the listed depth and height. This product is a no tab stop tray, so buyers replacing an existing tray should verify that this style matches the cabinet setup. Any load, compliance, or other technical requirements not shown here should be confirmed with the manufacturer or technical documentation.
What's included: One deluxe sink tip out tray and one pair of 45 degree hinges are included. The deluxe tray has a ring post and molded soap dish in the bottom.
What to verify before ordering: Check cabinet false-front width, inside clearance behind the sink front, hinge mounting position, desired closing action, and whether you need a no tab stop tray. If you are replacing another part, confirm the tray length, depth, color, and hinge angle before purchase.
A sink tip out tray is commonly used in the false-front space below a sink, where there is often room for shallow storage but not enough space for a full drawer. Buyers usually choose this product when they want a place for small items such as sponges, rings, or compact sink accessories. The Rev-A-Shelf sink tip out tray in this listing is built for that exact use case. It is a white plastic sink tip out tray with a 24 inch length, so it fits projects where a longer tray is needed across the sink front.
This model is part of the Rev-A-Shelf Lazy Daisy Series and is described as an entry level offering. That matters for installers and serious DIY buyers who want a straightforward sink tip out tray kit with the core parts in one package. The set includes one deluxe tray and one pair of 45 degree sink tip out tray hinges. Because it is a deluxe tray, the bottom includes a ring post and molded soap dish. That built-in shaping can be useful if the goal is to keep small loose items from moving around inside the tray.
The shallow 2-1/8 inch depth is also important in real cabinet installations. Space behind a sink false front is often restricted by the sink bowl, plumbing, or mounting hardware. A plastic sink tip out tray with this depth can work where a deeper tray may not. The listed height of 3-3/16 inches gives you another dimension to check before ordering. If you are replacing an older tray, compare all three dimensions carefully rather than assuming a 24 inch sink tip out tray from another series will match.
This self-close sink tip out tray is also suited to buyers who want a tray and hinge package instead of sourcing parts separately. If your project already has hinges, verify whether the included 45 degree hinges match your intended install. If your cabinet front or sink setup has unusual clearances, confirm hinge travel and mounting space before purchase. Follow manufacturer installation guidance and local building requirements where applicable.
When comparing sink tip out tray options, buyers usually focus on four things: tray size, included hardware, tray style, and molded tray details. This Rev-A-Shelf LD6591 model is clear on those points. It is a single deluxe tray, not a two-tray package. It includes one pair of 45 degree hinges. It is made of plastic. It is white. It also has no tab stop, which can matter when you are matching an existing cabinet arrangement or replacing a prior tray.
That makes this product easier to evaluate against other generic sink tip out tray listings that may not clearly state what is included. Some listings only provide a tray, while others separate the sink tip out tray hinges. Here, the included components are identified, which helps reduce ordering mistakes for buyers who need a ready-to-install set. The deluxe tray detail is also useful because standard and deluxe trays are not the same. Rev-A-Shelf states that deluxe trays have a ring post and molded soap dish at the bottom, while standard trays do not.
Another practical comparison point is the no tab stop design. Buyers replacing a damaged tray should not assume every sink tip out tray uses the same stop style. Matching that detail can help avoid fit or function issues after installation. The same applies to dimensions. A 24 inch sink tip out tray still needs sufficient false-front width and enough inside clearance for the 2-1/8 inch depth and 3-3/16 inch height.
Brand consistency also matters in replacement work. A Rev-A-Shelf sink tip out tray gives buyers a clearly identified manufacturer part number, LD-6591-24-11-1, and a defined series reference. That can simplify reordering, spec verification, and communication with a shop, installer, or purchasing department. If your application has unusual cabinet construction, confirm mounting details and clearances before ordering rather than relying only on tray length.
Rev-A-Shelf LD-6591-24-11-1 includes one deluxe tray and one pair of 45 degree hinges.
This sink tip out tray is a deluxe tray with a ring post and molded soap dish in the bottom.
This Rev-A-Shelf sink tip out tray measures 24 inches long, 2-1/8 inches deep, and 3-3/16 inches high.
This sink tip out tray fits only where the false-front width and inside cabinet clearance match the listed tray dimensions and hinge setup.
This sink tip out tray kit includes one pair of 45 degree hinges.
This Rev-A-Shelf sink tip out tray has no tab stop.
This sink tip out tray is made of plastic and comes in white.
This replacement sink tip out tray should be matched by length, depth, height, hinge angle, tray style, and no tab stop design.
This sink tip out tray is listed in Kitchen and Bath Cabinet Accessories, so buyers can use it in either type of cabinet if fit is correct.
This sink tip out tray should be installed using manufacturer installation guidance and local building requirements where applicable.
sink tip out tray selection is easier when the tray style, dimensions, and included hardware are clearly defined. This Rev-A-Shelf LD6591 set includes one white deluxe tray and one pair of 45 degree hinges, with a 24 inch length, 2-1/8 inch depth, and 3-3/16 inch height. Before you buy, confirm false-front width, inside sink cabinet clearance, hinge compatibility, and whether a no tab stop tray matches your application. That check helps you order the correct Rev-A-Shelf sink tip out tray the first time.
Sold In: 1 Each
