Liberty Iron Craft pull 3-1/2" Center to Center

Liberty Iron Craft Pull For Cabinet Projects

Liberty Iron Craft pull gives you a 3-1/2 inch center to center handle sized for standard cabinet layouts, so it aligns with common drilling jigs and keeps runs of doors and drawers visually consistent across a project. The pull is part of the Iron Craft collection from Liberty Hardware, which ties in across a space when the same series is used on multiple fronts. Steel construction under the wrought iron finish provides a solid feel in daily use while maintaining the traditional iron look on the exterior. The 5 inch overall length gives enough hand contact for comfortable gripping on typical cabinet doors or medium-width drawer fronts. A 1-5/9 inch projection sets the pull far enough off the surface for fingers to wrap cleanly without scraping the door or drawer face during operation. The 1/2 inch width keeps the profile lean so it works well on face frames and narrower rails.

Key Iron Craft Pull Details For Job Planning

• The 3-1/2 inch center to center dimension matches a common drilling pattern, which streamlines layout when repeating hole locations across multiple cabinet doors and drawers in a kitchen or shop run.
• The 5 inch overall length gives a balanced look on mid-size doors and drawers, helping hardware lines stay proportional to typical cabinet stile and rail dimensions in residential or light commercial work.
• The 1-5/9 inch projection spaces the gripping surface off the face, giving fingers working room behind the pull and helping reduce contact marks on finished cabinet surfaces during regular opening and closing.
• The 1/2 inch width keeps the pull visually slim, which suits narrow face frames or smaller drawer fronts where a wider handle could dominate the front and crowd nearby hardware or trim.
• Steel material with a wrought iron finish delivers the appearance of iron while using a steel base, which supports a sturdy feel in hand for repeat use on frequently accessed cabinets and drawers.
• The Iron Craft collection designation groups this pull with matching Liberty Hardware pieces, supporting consistent style when using the same collection across multiple rooms or cabinet banks.

Practical Mounting And Fit Dimensions For Installers

The 3-1/2 inch center to center drill spacing on this Liberty Hardware cabinet pull sets the mounting holes at a size commonly used with jigs and templates, which helps keep installation repeatable from one door or drawer to the next. With a 5 inch overall length, the pull provides enough bar length to span typical stile widths without crowding panel details or neighboring hardware. The 1-5/9 inch projection indicates how far the pull stands off the surface, which matters when planning clearance near adjacent doors, wall panels, or appliance handles. A 1/2 inch width allows the pull to sit neatly on narrower rails, making it useful where wider handles might overhang edges or interfere with design lines.

Using The 65173WI Wrought Iron Pull In Projects

Where This Liberty Hardware Pull Fits Best

This Liberty Hardware cabinet pull, identified by manufacturer part 65173WI, is sized around a 3-1/2 inch center to center layout that suits many cabinet door and drawer applications in kitchens, baths, and shop storage. The Iron Craft collection styling with a wrought iron finish works where a traditional iron look is needed on steel hardware, tying into darker hinges or decorative elements. At 5 inches in overall length, the pull presents a visible but controlled footprint on standard cabinet fronts, supporting use on both base and wall cabinets without overwhelming the face design. The 1/2 inch width is helpful on slimmer rails or smaller drawers, allowing a coordinated handle to be used across different cabinet sizes while keeping proportions in check on each front.

How Key Dimensions Support Consistent Results

The 3-1/2 inch center to center spacing on the Liberty Iron Craft pull allows repeated hole drilling with common jigs, which supports straight hardware lines when installing multiple pulls in a run of cabinets. The combination of a 5 inch overall length and 1-5/9 inch projection positions the gripping area comfortably away from the door or drawer face, which helps reduce knuckle contact with finished surfaces over time. Steel construction under the wrought iron finish gives the pull a solid core, supporting a stable feel when opening heavier drawers or frequently used cabinet doors. The 1/2 inch width helps keep alignment forgiving on face frame installations, as the narrower footprint sits cleanly on rails without overhanging edges, supporting visually straight installations even on tighter framing.

Common Questions About The Liberty Iron Craft Pull

Choose This Pull For Standard 3-1/2 Inch Layouts

The Liberty Iron Craft pull with 3-1/2 inch center to center spacing, steel construction, and wrought iron finish offers a straightforward option when a traditional iron look is needed on standard cabinet hole patterns. Its 5 inch length, 1-5/9 inch projection, and 1/2 inch width are sized for common cabinet doors and drawers, supporting consistent runs across a project. When a cabinet layout calls for a 3-1/2 inch center to center handle in the Iron Craft collection style, this 65173WI pull from Liberty Hardware aligns directly with that requirement.