Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Liberty stainless steel bar pull identifies this handle as a steel pull from Liberty Hardware with a stainless steel finish, which gives cabinetry a consistent look across a project. The 10-1/16 inch center-to-center dimension sets the handle spacing, so drilling patterns stay uniform from cabinet to cabinet. The 256 mm center-to-center metric reference lines up with layouts based on metric jigs or shop drawings. The overall 13-2/9 inch length provides a long gripping area, which helps when opening wider doors or heavier drawers. A 1-2/7 inch projection sets the handle off the face of the cabinet, giving fingers clearance without sticking out excessively into walkways. The 1/2 inch width creates a slim profile that works on both narrow and wide fronts. As part of the Builder's Program collection, this pull ties into a consistent style line for multi-unit or whole-kitchen work.
The 10-1/16 inch center-to-center mounting length defines exactly where to drill, which supports clean installations using cabinet templates or shop-built jigs. Using the 256 mm metric measurement for the same span fits metric-based layout systems without conversion on the bench. The 8-32 x 1 inch screw size matches common cabinet door and drawer thicknesses, which streamlines hardware prep and threading. With a 1-2/7 inch projection, the pull seats at a known offset from the surface, helping doors swing freely without knuckle contact. The 1/2 inch width works with narrow rail sections, giving room to position the pull without crowding panel edges. Together, these dimensions define a predictable mounting footprint that supports consistent results across production or one-off installs.
The 256 mm center-to-center bar pull layout suits cabinet doors and drawers designed around longer handles, so it works well on wider fronts where extra leverage is useful. The stainless steel finish pairs with modern or transitional cabinet styles, helping hardware match stainless appliances and other metal details. Its 13-2/9 inch overall length visually spans more of the door or drawer width, which can balance larger faces in kitchens, baths, or shop storage. The Builder's Program collection context positions this pull for multi-cabinet jobs where repeating the same model simplifies ordering and layout.
The 10-1/16 inch center-to-center dimension matches common extended-pull spacing, which supports upgrades from shorter handles when fronts are already drilled for that length. The 1-2/7 inch projection gives hand clearance on doors near walls or adjacent cabinets, helping pulls function smoothly in tighter runs. With a 1/2 inch width, this handle works on both framed and frameless cabinet styles, because it does not crowd door edges or stile transitions. The steel construction behind the stainless steel finish supports everyday cabinet use in residential and light commercial spaces.
The precise 10-1/16 inch (256 mm) center-to-center dimension lets installers rely on standard jigs, which reduces layout time and helps handles line up across tall cabinet stacks. Matching imperial and metric references also supports mixed-measurement shops, keeping hole placement consistent whether using imperial tapes or metric rules. The specified 8-32 x 1 inch screw size helps hardware prep move faster, because drill bit and tapping choices can stay the same from cabinet to cabinet.
The 1-2/7 inch projection works with typical door and drawer thicknesses to keep hands clear of wood edges, which reduces scuffing on finished surfaces during everyday operation. The 13-2/9 inch overall length offers a broad area to grab, which can be helpful on larger pantry doors or deep drawers filled with heavier contents. With a 1/2 inch width, this bar pull stays low profile visually, so rows of hardware on banks of drawers present a clean, linear appearance. The Builder's Program collection association allows the same design language to carry through an entire project, which simplifies hardware selection on multi-room installs.
This bar pull has 10-1/16 inch center-to-center spacing, also listed as 256 mm, which sets the exact distance between mounting holes for drilling and layout.
The Liberty Builders Program Series bar pull has a 13-2/9 inch overall length, giving a longer gripping surface suitable for wider cabinet doors and drawers.
The P01016-SS-C pull is made from steel with a stainless steel finish, providing a consistent, modern look across cabinets using the same hardware line.
This 256 mm center to center pull projects 1-2/7 inches from the cabinet surface, providing finger clearance while keeping the handle close to the door or drawer face.
This Liberty stainless steel bar pull uses 8-32 x 1 inch screws, matching common cabinet door and drawer thicknesses for straightforward hardware fastening.
This Liberty Hardware pull is part of the Builder's Program collection, aligning it with related pieces designed for coordinated cabinet projects.
The Liberty stainless steel bar pull with 10-1/16 inch (256 mm) center-to-center spacing brings defined mounting dimensions and a consistent stainless appearance to cabinet projects. The 13-2/9 inch length and 1-2/7 inch projection create a predictable grip profile across doors and drawers. With steel construction, a 1/2 inch width, and 8-32 x 1 inch screw sizing, this P01016-SS-C handle fits well into cabinet shop workflows focused on repeatable layouts. Add this Liberty Builders Program pull to align hardware details across your next run of cabinets.