Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Liberty Steel Series stainless steel pull is a steel bar pull from Liberty Hardware designed for cabinets and similar casework where a long, continuous grip is preferred. The pull uses steel construction, which provides a solid feel in the hand and consistent performance under regular door and drawer operation. The stainless steel finish covers the steel material, giving a clean metallic appearance that pairs well with other stainless details in a project. The bar pull measures 24-5/8 inches in overall length, so it visually spans wider fronts and helps align multiple fronts in a run. A center-to-center dimension of 21-3/8 inches sets the drilling layout, allowing this pull to bridge larger drawer faces or tall doors. A projection of 1-5/16 inches creates space between the bar and the surface, which supports finger clearance during daily use.
The 21-3/8 inch center-to-center measurement on this Liberty stainless steel bar pull defines the hole spacing the installer uses, which is critical for accurate boring on wide drawers or full-height doors. With an overall length of 24-5/8 inches, the bar extends beyond the mounting points, providing overhang that visually balances wide faces and helps align multiple handles in long cabinet runs. The width of 1/2 inch keeps the contact area compact, which supports tight reveals where space between fronts is limited. A projection of 1-5/16 inches sets the stand-off from the door or drawer surface, giving consistent clearance so fingers can grasp from above or below. The specified 8-32 x 1 inch screw size works with common cabinet construction thicknesses, simplifying thread matching during installation. These dimensions together set expectations for layout, drilling, and final handle feel.
This Liberty Hardware steel bar pull suits cabinets and casework that benefit from a long, linear handle, such as wide kitchen drawers, pantry doors, or storage cabinets. The 21-3/8 inch center-to-center spread positions the fasteners far apart, which is useful on wider fronts where a small pull would feel undersized. With a 24-5/8 inch total length, the handle spans a significant portion of the surface, helping visually organize tall doors and deep drawers into consistent lines. The stainless steel finish supports use in spaces where other stainless elements, such as appliances or fixtures, set the visual tone. The 1/2 inch width lets the pull sit comfortably on narrow frame members or slab fronts without crowding edges. At 1-5/16 inches projection, the bar stands off enough to serve users approaching from different angles, which is important on high-traffic cabinet banks.
The defined center-to-center dimension of 21-3/8 inches guides boring patterns, which aids repeatable drilling across a full kitchen or bank of storage cabinets. When an installer follows that spacing, every handle in the Liberty Steel Series stainless steel pull layout shares the same grip position, helping doors and drawers operate consistently. The known overall length of 24-5/8 inches lets planners align bar ends relative to drawer edges or panel centers, which matters when creating symmetrical banks or paired fronts. The combination of 1/2 inch width and 1-5/16 inch projection sets a predictable gripping geometry, which can be repeated on upper and lower cabinets without changing user reach. Using the specified 8-32 x 1 inch screw size ties the pull into standard cabinet fastener practice, which helps maintain straightforward installation across multiple cabinets. These fixed measurements keep planning, drilling, and mounting consistent from one location to the next.
The Liberty Steel Series stainless steel pull has a 24-5/8 inch overall length, 21-3/8 inch center-to-center, 1/2 inch width, and 1-5/16 inch projection, giving a long span with consistent finger clearance.
The pull uses steel material with a stainless steel finish, providing a solid metal grip with a neutral metallic appearance that aligns with many cabinet and appliance finishes.
The 21-3/8 inch center-to-center size suits wider cabinet drawers or tall doors, where the extended mounting spread supports larger faces and helps balance the overall cabinet layout.
The 1-5/16 inch projection sets the bar away from the surface, creating room for fingers to wrap behind the pull so doors and drawers can be opened with a full grip.
The Liberty Hardware pull is specified for 8-32 x 1 inch screw size, aligning with common cabinet hardware threads for straightforward fastening into standard door and drawer construction.
The manufacturer part number is P01022-SS-C, which identifies this specific Liberty Steel Series bar pull when matching it across project documents or reordering.
The Liberty stainless steel bar pull with 21-3/8 inch center-to-center spacing suits projects that call for a long, linear handle on wide or tall cabinet fronts. Steel construction and a stainless steel finish give this pull a solid metal presence that coordinates with many jobs. The 24-5/8 inch overall length and 1/2 inch width present a modern profile while still delivering a substantial gripping area. With a 1-5/16 inch projection and 8-32 x 1 inch screw size, the pull fits into standard cabinet layouts and fastening practice. For work that benefits from consistent drilling patterns and aligned hardware across multiple fronts, this Liberty Hardware bar pull provides fixed, known dimensions that support planning, layout, and installation.