Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Liberty Steel Series 3-3/4 pull is a satin nickel cabinet pull designed for decorative cabinet and furniture applications, so it serves both as a functional handle and as a visible design element in finished work. The pull is part of the Builder's Program collection, which identifies it as a consistent style choice across multiple openings on the same project. Its center-to-center dimension is 3-3/4 inches (96 mm), which sets the drilling pattern and helps match existing 96 mm layouts on cabinet doors and drawers. The overall length of 4-7/16 inches gives a bit of overhang past the screw centers, which provides finger clearance and a balanced look on standard cabinet faces. Made from zinc die cast material, the pull has a solid metal construction that supports everyday opening and closing. The satin nickel finish provides a subdued metallic appearance that works in a wide range of interior styles while visually matching other satin nickel decorative hardware.
This Liberty Hardware pull has a center-to-center measurement of 3-3/4 inches (96 mm), so hole spacing follows that exact dimension when laying out doors and drawers. With an overall length of 4-7/16 inches, the handle extends past the mounting points, which influences how it sits on narrow or wide rails during layout work. The 1-1/8 inch projection sets how far it stands proud of the surface, affecting clearance over adjacent doors, trim, or countertop edges. At 7/16 inch wide, the pull presents a relatively slim band on the face, which helps when positioning it on smaller drawer fronts where space is limited. The satin nickel finish and Builders Program collection identity make this pull well suited for consistent, repeated mounting across multiple cabinets in the same room.
This Liberty Steel Series pull is categorized under decorative hardware handles and pulls, so it is intended for use on cabinet doors, drawers, and similar furniture fronts where both appearance and daily function matter. The 3-3/4 inch (96 mm) center to center dimension matches a common drilling standard, which simplifies aligning multiple doors and drawers on a line of cabinets using a single boring setup. Its 4-7/16 inch overall length helps it span typical drawer rails without overpowering the face, which is useful when repeating the same handle on a kitchen run or bank of vanity drawers. The satin nickel finish ties into the Builders Program collection, giving a consistent look when this model is used room-wide, from base cabinets to uppers. With a width of 7/16 inch, the bow profile reads as a lean pull rather than a heavy bar, which can be an advantage on narrower stile-and-rail doors or compact bath cabinetry.
The zinc die cast construction of this pull provides a uniform casting for each piece, which helps maintain consistent dimensions when multiple pulls are installed on a long cabinet run. The 3-3/4 inch (96 mm) center-to-center measurement allows jigs and templates set for that spacing to be reused across doors and drawers, reducing layout variation from one opening to the next. Its 1-1/8 inch projection offers predictable stand-off from the face, so clearances at corners, near walls, or around appliance panels can be planned using that fixed offset. The 4-7/16 inch length repeats from pull to pull, giving a steady visual rhythm along drawer banks and tall pantry doors. The satin nickel finish delivers the same color and sheen on each unit in the Liberty Hardware Builders Program collection description, which supports visually uniform installations where mismatched finishes would stand out. The 7/16 inch width stays consistent across pieces, helping installers line up edges and sightlines when setting multiple handles on a project.
The Liberty Steel Series pull has a 3-3/4 inch (96 mm) center-to-center dimension, setting the exact screw hole spacing used when drilling cabinet doors and drawers for this model.
The pull measures 4-7/16 inches in overall length, so it extends slightly beyond the 3-3/4 inch mounting centers and provides a balanced footprint on typical cabinet rails.
The satin nickel bow pull has a 1-1/8 inch projection from the mounting surface, which defines the stand-off distance and helps plan clearance around doors and adjacent surfaces.
This Liberty Hardware pull is made from zinc die cast material, providing a solid metal body that maintains consistent dimensions across multiple pulls on the same project.
The P0270A-SN-C cabinet pull has a satin nickel finish, giving it a soft metallic appearance that coordinates with other satin nickel decorative hardware and fixtures.
This Liberty cabinet pull is part of the Builder's Program collection, which identifies it as a coordinated style choice for use across multiple cabinets in the same project.
The Liberty Steel Series 3-3/4 inch (96 mm) satin nickel pull combines a defined center-to-center layout, zinc die cast construction, and a consistent Builders Program style, making it well suited for projects that repeat the same pull across multiple cabinet openings. Its 4-7/16 inch overall length, 1-1/8 inch projection, and 7/16 inch width give clear dimensional guidelines for planning rail sizes and hardware locations. Selecting this P0270A-SN-C model from Wurth Baer Supply aligns the decorative hardware choice with a repeatable 96 mm drilling pattern on cabinet doors and drawers.
Sold In: 1 Each