
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Sugatsune Right Hand 20RK Adjustable Soft-Down Lid Stay is a right side stay for top-opening lids that holds the lid in the closed position and in set open positions. The stay holds the door open at either 70 or 105 degree angles, depending on positioning, so a fabricator can choose the angle that fits the application layout. The soft-down function controls the downward movement, so the lid lowers in a controlled motion rather than dropping, which supports cleaner operation in work surfaces and tables. This stay is nickel-plated, so the exterior has a metal finish suited to cabinet and furniture hardware environments. The product is classified under lid supports and stays, so it is designed as part of a lift system for top-opening work surfaces or cabinet lids.
The NSDX-20RK stay is specified as a right side part for top-opening lids, so its layout suits the right-hand side of the lid when viewed from the front. The torque rating of 19 to 60 lbs per square inch per piece means the installer can select the number of stays and adjustment setting to match the combination of lid weight and height described by the torque formula. The torque rating is defined as lid height times lid weight times one-half, so a builder can calculate whether the configured lid falls within the rated range for the chosen number of stays. The speed adjustment screw provides another adjustment point, so after torque is set within the range, the soft-close downward movement can be tuned for the desired motion speed.
The NSDX-20RK stay is described for top-opening lids, so it applies to lift-up lids on work surfaces, tables, or cabinets where the panel swings upward. Because the stay holds the door open at 70 or 105 degrees, the lid can be positioned to clear nearby walls or counters while still staying open for access. The right side orientation means this part belongs on the right-hand side of the lid assembly, working as part of a matched layout where a corresponding part can be used on the opposite side. As a lid support in the lid supports and stays product class, the NSDX-20RK takes the role of controlling both the hold-open position and the closed position, so the same component manages movement throughout the cycle. The nickel-plated finish ties it to other nickel-plated cabinet hardware, which helps maintain a consistent appearance when it is visible inside a cabinet or work surface structure.
The NSDX-20RK offers an adjustable 19 to 60 lbs per square inch torque rating per piece, and a combined 38 to 120 lbs torque rating per pair, so torque selection can be matched to the calculated requirement using the torque formula of lid height times lid weight times one-half. This direct relationship between torque rating and lid dimensions lets the installer size the system using those three values, which supports repeatable results across similar projects. The speed adjustment screw provides a second layer of tuning for varying speeds of soft-close downward movement, so after torque is set for lid support, the actual descent speed can be altered within the product capability. The stay holds doors in the closed position and open at 70 or 105 degrees, so once installed within the rated torque range, the opening and closing cycle becomes consistent from job to job. Testing to 50,000 cycles further defines the operational profile across many repeats of this cycle, which is relevant where work surfaces or cabinet lids are opened and closed frequently in woodworking or shop settings.
The NSDX-20RK is designed for top-opening lids, so it suits cabinets, work surfaces, or tables where the lid lifts upward rather than swinging sideways.
The NSDX-20RK holds the door open at either 70 or 105 degrees, depending on positioning, so the opening angle is chosen during setup to fit the surrounding layout.
The NSDX-20RK has an adjustable 19 to 60 lbs per square inch torque rating per piece, meaning its resistance is set to match the torque requirement calculated from lid height and lid weight.
A pair of NSDX-20RK stays provides a 38 to 120 lbs torque rating, so using two stays extends the support range for heavier or taller lids within that torque band.
The NSDX-20RK has a speed adjustment screw that allows varying speeds of soft-close downward movement, so the motion speed can be tuned to match lid behavior.
The NSDX-20RK is tested to 50,000 cycles, indicating the soft-down and hold functions have been operated repeatedly to define performance over many open-close actions.
The NSDX-20RK right side adjustable soft-down lid stay combines top-opening lid support, selectable 70 or 105 degree hold-open positions, and a speed adjustment screw for controlled soft-close downward movement. Its adjustable 19 to 60 lbs per square inch torque rating per piece, and 38 to 120 lbs torque rating per pair, align lid dimensions and weight to the stated torque formula of lid height times lid weight times one-half. Tested to 50,000 cycles and finished in nickel plate, this Sugatsune America stay from Wurth Baer Supply is structured for use in lid supports and stays applications where motion control and defined torque capacity are important.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SLNSDX-20LK Mfr# NSDX-20LK | NSDX-20LK lid stay, left-hand soft-down |