Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Sugatsune 16 Series pull is a contemporary stainless steel bar pull designed for cabinet doors and drawer fronts where a standard pull would read too small for the front.
A 7-9/16 inch center-to-center is the right spacing for wider base drawers, full-height pantry doors, and island fronts where a shorter pull would look visually light against the expanse of the door. At this spacing, the pull is long enough to register as a deliberate design element rather than an accessory. It is also a practical fit for any existing cabinet already drilled to 192 mm centers, making it a direct drop-in replacement without new holes.
The slim 1/2 inch bar section keeps the pull from dominating slab and flat-panel fronts. Where the cabinetry relies on clean geometry, a narrow bar reinforces that language rather than interrupting it.
Stainless steel is the base material and the finish on this pull, which means the satin surface is not a plating over a different metal. The color runs through the piece, and the look holds up to everyday contact in a way that a coated finish cannot replicate. The satin texture reduces glare along the bar and keeps the surface from showing every mark that a polished finish would. In a kitchen or bath already running brushed or satin stainless appliances, faucets, or fixtures, this pull joins that language without requiring a separate selection decision.
Cabinet shops and installers specifying a full kitchen frequently reach for a 192 mm pull on wide base drawers while running a shorter spacing on narrower ones, keeping all pulls in the same series for a consistent profile. The 16 Series is a practical choice for that kind of project because the same bar section and satin surface carry across the full range of spacings, so mixing lengths within the collection reads as intentional rather than mismatched.
Designers working on contemporary kitchens where the hardware is meant to coordinate with stainless appliances will find this pull straightforward to specify. Homeowners replacing hardware on an existing cabinet drilled to 192 mm centers can use this as a direct swap without modification.
Yes. The pull is solid stainless steel, so the surface is consistent across the bar, the posts, and the mounting bases.
The center-to-center, 7-9/16 inches (192 mm), is the distance between the two mounting holes and is what you match to your existing drilling or new layout. The overall length, 8-7/16 inches (214 mm), is the end-to-end size of the pull and determines how it looks on the front.
The 16 Series is available in multiple center-to-center sizes, so you can run the same bar profile and finish across drawers of different widths within one kitchen.
If your existing holes are on 7-9/16 inch (192 mm) centers, this pull mounts without additional drilling. Measure between the centers of your existing holes to confirm before ordering.
At 7-9/16 inches center-to-center, this Sugatsune 16 Series pull is sized to hold its own on the fronts where shorter pulls disappear, finished in the same satin stainless that coordinates with the rest of the kitchen without a second thought.
