Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
492mm stainless steel pull from the Sugatsune 16 Series gives you a long, continuous grip that suits wide cabinet doors and tall drawers in one clean line. The 19-3/8 inch center to center layout spaces your drill points for larger fronts, so the pull spans the panel without looking undersized. 304 stainless steel material forms the body of the pull, which supports a solid feel in everyday use. The stainless steel finish keeps the appearance consistent across a run of cabinets where visual alignment matters. A 1/2 inch width keeps the profile slim across the front, so the handle does not dominate narrow stiles. The 1-5/16 inch projection stands the pull off the face enough for a comfortable hand clearance, which helps when opening heavier storage. The 1655-S part number ties directly to this size and finish, which aids repeat ordering on multi-unit jobs.
The 19-3/8 inch (492 mm) center to center measurement defines your drilling pattern, so once holes are laid out to that spacing, the Sugatsune 16 Series pull locates consistently across multiple fronts. Using the stated M4 x 25 mm screw size sets both thread and length expectations, which aligns with common cabinet construction where the screw passes through the panel into the pull posts. The 1-5/16 inch projection defines how far the handle stands away from the face, which influences door swing clearance near adjacent surfaces. With a 1/2 inch width, the footprint across the front stays compact, which simplifies aligning the pull over narrow rails. The stainless steel finish on 304 stainless steel allows this handle to visually tie into other stainless details, supporting a coordinated hardware layout.
The 19-3/8 inch center to center length puts this Sugatsune America 16 Series pull into a role on wider cabinet doors, pantry fronts, and long drawers where a shorter handle would look undersized. The 492 mm spacing matches metric layouts, which can be useful on projects built around European cabinet systems. With its 1/2 inch width, the pull keeps a slim line along tall fronts, so the hardware tracks visually without overpowering the panel design. The stainless steel finish ties into other stainless steel cabinet components, which supports consistent appearance from base cabinets to tall units. Using a single long pull at this size can also align handles across stacked drawer banks, which keeps lines straight between adjacent fronts.
The clearly stated 492 mm center to center distance on the 1655-S pull standardizes hole placement, which helps templates or jigs line up the handle across many doors and drawers with the same pattern. Knowing the M4 x 25 mm screw size in advance means drill sizes and pilot depths can be planned to suit that thread, which reduces adjustments during installation. The 1-5/16 inch projection from the face establishes pull clearance away from the cabinet, which supports comfortable grip access for different hand sizes. Because the pull is made from 304 stainless steel, the material and finish stay consistent from one unit to the next, which helps maintain the same look when replacing or adding handles later using the Sugatsune 16 Series. The 1/2 inch width also simplifies centering on narrow rails, since the slimmer profile leaves more tolerance side to side while still aligning visually.
The pull has a 19-3/8 inch (492 mm) center to center dimension, which sets the spacing between mounting holes for layout and drilling.
The Sugatsune 16 Series pull uses 304 stainless steel, which provides a solid metal handle suitable for regular cabinet and drawer operation.
The 1655-S pull projects 1-5/16 inch from the surface, which creates usable finger clearance between the handle and cabinet front.
The handle width is 1/2 inch, which keeps the profile slim across the front while still providing a clear gripping edge.
This cabinet pull uses M4 x 25 mm screws, which defines the thread and typical reach through standard cabinet door and drawer fronts.
The pull has a stainless steel finish, which matches its 304 stainless steel construction for a consistent appearance on cabinets.
The Sugatsune America 16 Series 1655-S pull combines a 19-3/8 inch (492 mm) center to center length with 304 stainless steel construction, giving you a long, slim handle that suits wide fronts. Use this satin stainless steel pull wherever a continuous, aligned grip is needed across cabinets and drawers.
