Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune SN-95/S is a rectangular tab pull from the SN Series, designed for cabinet doors and drawer fronts where a compact grip and a clean stainless profile are the priority.
The 65 mm center-to-center dimension places this pull in a range that suits narrower drawer fronts and upper cabinet doors where a longer pull would overrun the front or crowd the edge. At 3-3/4 inches overall, it reads as purposeful hardware rather than a gesture toward minimalism. Cabinet shops fitting out a run of narrow spice drawers, small upper doors, or a bank of shallow utility drawers will find this spacing hits a hole pattern that the more common 96 mm pull does not. It also lands cleanly on frameless door fronts where two-hole hardware needs to clear the hinge without reaching the far edge of the stile.
The SN-95/S is made from 304 stainless steel, which means the material is consistent from the surface to the core rather than a zinc body carrying a plated or coated surface. The Satin Stainless Steel finish is a brushed matte surface that diffuses light evenly across the pull rather than concentrating it at highlights. In a kitchen or bath running stainless appliances, the finish connects the cabinet hardware to the surrounding fixtures without trying to replicate a polished chrome. The low-sheen surface also shows handling marks less readily than a polished stainless would, which matters on a pull that gets touched many times a day.
This pull is a practical choice for designers and cabinet shops specifying contemporary kitchens, utility rooms, and professional spaces where the hardware finish should hold up alongside stainless appliances, commercial sinks, and other metal surfaces without demanding maintenance. The tab form works equally well on a flat-slab front or a shaker-style door, keeping the profile geometric and consistent with the cabinetry. Because this pull belongs to the SN Series, companion pieces across multiple center-to-center spacings are available in the same finish and design language, making it straightforward to run a consistent hardware program across a full kitchen from narrow spice drawers to wider base fronts.
It is less common than 96 mm but is a recognized spacing used on narrower drawer fronts. Measure between the centers of your existing holes before ordering to confirm the fit.
A bar pull carries its grip on two raised posts, standing the bar away from the door face. A tab pull is a lower-profile form where the grip sits closer to the surface, giving a flatter look on the front.
304 stainless steel resists tarnishing under normal interior use. The satin surface does not carry a separate coating that can wear through.
The SN Series is available across multiple center-to-center spacings in the same Satin Stainless Steel finish and rectangular profile, so companion pulls in larger sizes coordinate directly with this one.
Choose the SN-95/S when the project calls for a mid-span stainless pull at 65 mm centers, and pair it with other SN Series pieces to hold a single finish and profile across every front in the room.
Sold In: 1 Each
