Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPT3195MNL1 to RST3195MNL1.
Omega T31 Maple 8" 2-Shelf Tray Organizer is a pre-engineered rollout designed for 9", 12" or 15" wide face frame cabinets with 1-1/2" frame openings, so it turns standard base boxes into organized tray storage without altering the cabinet layout. The organizer provides practical space for hard to store and hard to reach pans, trays or serving platters, which streamlines access in busy kitchens where deep stacks slow down workflow. Constructed from pre-finished plywood, it arrives ready for installation, so the interior surfaces are already sealed for a clean look that fits in a finished cabinet. KV8405 100 lb ball bearing 1" over travel slides support the rollout, giving it the strength to carry heavy cookware while allowing the tray to extend past the cabinet face for better visibility of stored items. Interior partitions are removable, letting you reconfigure lanes to fit different tray sizes as needs change.
The organizer is built for face frame cabinets that are 9", 12" or 15" wide with 1-1/2" frame openings, aligning the rollout body with these common framings so the movement stays clear of stiles. By using KV8405 100 lb ball bearing 1" over travel slides, the unit moves smoothly on a slide system rated for substantial weight, which supports heavier pans or multiple platters without binding under load. The 1" over travel feature lets the tray move past the front of the cabinet, improving reach to items stored at the back of each lane so they can be lifted straight out. Pre-finished plywood construction supports consistent dimensions and stable slide mounting surfaces, which helps maintain alignment between the organizer and the face frame over repeated use.
This tray organizer is intended for 9", 12" or 15" wide face frame base cabinets with 1-1/2" frame openings, so it fits typical cabinet runs found in many kitchen layouts. In those cabinets, the rollout provides practical space for hard to store and hard to reach pans, trays or serving platters, converting a single open cavity into vertical lanes that keep each piece accessible. The pre-finished plywood body is suited to finished cabinet interiors, so once installed, the interior appearance aligns with a completed kitchen rather than a shop fixture. For installers working on kitchen remodels or cabinet upgrades, this organizer lets a standard base cabinet take on a defined role for flat cookware storage, helping the end user assign specific cabinets to specific tasks.
KV8405 100 lb ball bearing 1" over travel slides allow the tray organizer to handle significant weight while extending fully past the face frame opening, so heavy sheet pans or stacked serving platters can be lifted without dragging against the countertop edge. The ball bearing action supports smooth travel under load, which is important when the organizer carries multiple metal pans that would otherwise strain lighter slides. Interior partitions are removable, so the installer or user can open wider lanes for large platters or tighten spacing for multiple baking sheets in one bay, tailoring the rollout to the cookware mix in that kitchen. Because the partitions sit inside a pre-finished plywood structure, adjustments to the layout do not require any refinishing, keeping changes straightforward over the life of the cabinet. Together, the slide design and flexible partitions let this base cabinet tray organizer adapt to changing storage needs while maintaining consistent movement and access.
The Omega T31 Maple 8" 2-Shelf Tray Organizer is designed for 9", 12" or 15" wide face frame cabinets with 1-1/2" frame openings, so it matches several common base cabinet widths.
The KV8405 100 lb ball bearing slides allow the organizer to carry heavier pans, trays or serving platters without stressing the mechanism, which supports reliable rollout under normal kitchen loads.
The 1" over travel slide feature moves the organizer past the cabinet front, improving access to items at the back so trays can be lifted out directly instead of being pulled around the frame.
The organizer uses pre-finished plywood so its interior surfaces are already sealed and visually ready for installation, saving finishing steps and aligning with finished cabinet interiors.
The removable interior partitions let you adjust the width and number of lanes, so the same organizer can be reconfigured to hold different combinations of pans, trays or serving platters.
The organizer is intended to provide practical space for hard to store and hard to reach pans, trays or serving platters, keeping these tall, flat pieces organized in the base cabinet.
This Omega T31 Maple 8" 2-Shelf Tray Organizer from Omega National Products is built specifically for 9", 12" or 15" wide face frame cabinets with 1-1/2" frame openings, so it aligns well with many base cabinet layouts. KV8405 100 lb ball bearing 1" over travel slides and pre-finished plywood construction combine to support heavy cookware on a smooth, fully extending rollout. Removable interior partitions let the same unit adapt to different mixes of pans, trays or serving platters as kitchen needs change. For projects that call for dedicated flatware storage in base cabinetry, this tray divider rollout organizer offers a defined, repeatable solution.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RST3194MNL1 Mfr# T3194MNL1 | Omega T31 Maple 5" 2-Shelf Tray Organizer, T3194MNL1 | ||||
Sold in: 1 Each |  RST3196MNL1 Mfr# T3196MNL1 | Omega T31 Maple 11" 3-Shelf Tray Organizer, T3196MNL1 |
