NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPL3240QUF9 to RSL3240QUF9.
Omega National Alder wine rack 24x30 is a Sonoma Series wine bottle storage rack built for cabinet and woodworking projects where consistent bottle layout matters. The rack is manufactured from 3/4 x 7/16 hardwood moldings, so installers work with stable, uniform stock when fitting it into custom cabinetry or a dedicated wine section. Its square design with a flush fit creates clean lines inside a cabinet opening, which helps align surrounding face frames and trim for an integrated look. The 24 inch wide by 30 inch high size matches common upper cabinet dimensions, giving designers a known module when laying out a run of wine storage. This 24x30 configuration has 24 bottle openings, so capacity is predictable when planning how many bottles each cabinet bay will hold.
The 24 inch width by 30 inch height of this Omega National wine bottle storage rack gives installers a fixed module to work into cabinet designs, so rough openings and face frames can be sized around a known interior component. Because the rack is constructed from 3/4 x 7/16 hardwood moldings, its thickness is predictable from piece to piece, which supports consistent reveal lines where the rack meets cabinet sides or dividers. The square design with a flush fit allows the grid of openings to sit even with adjacent framing, so trim, light rails, or finished edges can be cut without compensating for irregular projections.
This Sonoma Series wine bottle storage rack fits naturally into kitchen and bath cabinet projects that call for dedicated wine storage, because it is part of Omega National Products wine bottle and stemware storage category. The 24x30 overall size lets it act as a vertical module in a wall cabinet run, so a designer can allocate a single 24 inch wide cabinet to hold 24 bottles in a predictable grid. With 24 bottle openings measuring 3-3/4 inches square, the rack defines a regular pattern that suits full-height wine cabinets as well, since multiple racks of the same width can be stacked to extend storage vertically while keeping spacing consistent. Being available in unfinished Alder gives shops working with Alder doors or face frames a matching species to integrate the rack visually within the overall cabinet design.
The rack being manufactured from 3/4 x 7/16 hardwood moldings means every piece carries the same cross-section, which supports jigs and stops that depend on precise material thickness for cutting and assembly in production settings. The square design and flush fit translate into a uniform front plane, so when installers align this rack with surrounding Omega National wine bottle and stemware storage elements, the faces track on the same line for a controlled finished look. The defined 24 inch width by 30 inch height keeps layout predictable when using the companion Sonoma Series size of 24 inch wide by 43 inch high, because both share the same width, allowing designers to mix the two heights while keeping cabinet fronts aligned. The pair format with front and back racks lets bottle openings stay registered from face to back, which stabilizes bottles in use and supports consistent drilling or dado placement along cabinet sides.
The L3240QUF9 Sonoma Series wine rack measures 24 inches wide by 30 inches high, so it aligns well with typical 24-inch cabinet modules in wall or tall cabinet layouts.
This Omega National Alder wine bottle storage rack has 24 bottle openings, giving a clear 24-bottle capacity for each installed unit in a cabinet run.
Each wine bottle opening in the Sonoma Series rack is 3-3/4 inches square, which sets a consistent spacing pattern for bottles within the cabinet interior.
The Sonoma Series L3240QUF9 rack is manufactured from 3/4 x 7/16 hardwood moldings in unfinished Alder, so material thickness and species match Alder-focused cabinet work.
The square design with flush fit creates an even front plane, helping align face frames, trim, and adjacent storage components for a consistent cabinet appearance.
The Sonoma Series also offers a 24 inch wide by 43 inch high rack with 28 openings, so both sizes share the same width for modular design across different heights.
The Omega National Alder wine rack 24x30 gives shops a defined 24 inch wide by 30 inch high module with 24 bottle openings, which simplifies planning bottle capacity in kitchen or bar cabinetry. Its construction from 3/4 x 7/16 hardwood moldings in unfinished Alder ties directly into Alder-based cabinet programs where matching species matters for finishing. The Sonoma Series square design and flush fit support clean integration into wall units or full-height wine cabinets. For projects that need consistent wine bottle storage within a standard cabinet footprint, this L3240QUF9 rack provides a predictable layout that aligns with common 24 inch cabinet widths.
Sold In: 1 Pair
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Pair | RSL3240MUF9 Mfr# L3240MUF9 | Omega National Maple Wine Bottle Storage x 24"W x 30"H, 24 Openings Unfinished - L3240MUF9 | ||||
Sold in: 1 Pair | RSL3240CUF9 Mfr# L3240CUF9 | Omega National Cherry Wine Bottle Storage x 24"W x 30"H, 24 Openings Unfinished - L3240CUF9 | ||||
Sold in: 1 Pair | RSL3220QUF9 Mfr# L3220QUF9 | Omega National Alder Wine Bottle Storage x 24"W x 43"H, 28 Openings Unfinished - L3220QUF9 | ||||
Sold in: 1 Pair | RSL3220OUF9 Mfr# L3220OUF9 | Omega National Red Oak Wine Bottle Storage x 24"W x 43"H, 28 Openings Unfinished - L3220OUF9 | ||||
Sold in: 1 Pair | RSL3220MUF9 Mfr# L3220MUF9 | Omega National Maple Wine Bottle Storage x 24"W x 43"H, 28 Openings Unfinished - L3220MUF9 | ||||
Sold in: 1 Pair | RSL3220CUF9 Mfr# L3220CUF9 | Omega National Cherry Wine Bottle Storage x 24"W x 43"H, 28 Openings Unfinished - L3220CUF9 | ||||
Sold in: 1 Pair | RSL3240OUF9 Mfr# L3240OUF9 | Omega National Red Oak Wine Bottle Storage x 24"W x 30"H, 24 Openings Unfinished - L3240OUF9 |