Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Straight Shelf Support with 5mm Peg describes a solid steel, nickel-plated shelf rest built for 5 mm hole borings, so it matches standard cabinet and closet drilling patterns and keeps layout work predictable across multiple panels. The solid steel construction provides a robust bearing surface for the shelf edge, which supports stable storage in shelf, closet, and garage organization projects. The nickel-plated finish adds a clean, metallic appearance that matches other nickel hardware, which helps maintain a consistent look across a run of cabinets. The shelf support diameter of 5/16 inch gives a broad contact surface under the shelf, which helps distribute load along the shelf underside. The shelf support protrusion of 19/32 inch projects the rest out from the side panel, positioning the shelf properly while leaving working clearance at the cabinet back.
The pin on this shelf support measures 5 mm, or 3/16 inch, in diameter, so it matches standard 5 mm drilling equipment used in many cabinet shops and installation setups. The pin length of 5/16 inch allows the pin to sit securely in the hole while leaving the head of the support fully exposed, which keeps the bearing surface available for the shelf edge. This pin length permits pins to be introduced on both sides of a 5/8 inch thick wall, so opposite panels in a cabinet can each accept supports without interference when using 5/8 inch material. That compatibility with 5/8 inch walls helps maintain a uniform shelf layout across both sides of a cabinet opening, saving layout steps when repeating the same carcass dimensions.
This shelf support belongs to the shelf supports class and is intended for shelf, closet, and garage organization applications, so it suits typical storage cabinetry built for these environments. The design as a straight shelf support with a protruding rest means the support engages directly beneath the shelf edge, which is well suited to flat, adjustable shelves resting on system holes. Fitting into 5 mm hole borings allows this support to work wherever panels have that drilling pattern, from cabinet sides to closet uprights, tying into standard 32 mm style layouts or other 5 mm-based systems. Because the pin length permits introduction on both sides of a 5/8 inch thick wall, installers can use the same support in paired panels built from 5/8 inch stock, maintaining symmetry in opposing sides of a cabinet or partition. The 5/16 inch diameter of the shelf rest body allows good contact with shelf edges commonly used in storage units, giving the shelf a stable seat along the side panel line.
The manufacturer part number X3014K identifies this specific nickel-plated, solid steel shelf rest, which helps keep reorders and project documentation consistent whenever this exact support is specified. The nickel-plated finish on the solid steel structure gives both a defined appearance and a stable surface, so multiple supports in a run present the same look and contact properties along each shelf line. The protrusion of 19/32 inch from the mounting panel fixes the shelf position relative to the cabinet side, which simplifies repeated installations where shelf overhang and depth alignment must match across several units. The 5/16 inch diameter of the support where it meets the shelf limits point loading along the shelf underside, supporting more even distribution of typical loads in everyday cabinet and closet use. Because the pin diameter is 5 mm, or 3/16 inch, installers working with standard 5 mm boring machines can produce accurate rows and expect this support to seat consistently in every hole.
The X3014K is a straight shelf support with a 5 mm pin and 5/16 inch diameter rest, so it supports flat shelves on standard 5 mm bored panels.
This shelf support fits 5 mm hole borings, so it matches panels drilled with 5 mm bits used in many cabinet and closet systems.
The shelf support protrudes 19/32 inch from the panel, positioning the shelf consistently into the opening for uniform alignment in installations.
The pin is 5/16 inch long, which allows secure seating in the hole while keeping the support head clear to carry the shelf edge.
This shelf support has a pin length that permits use on both sides of a 5/8 inch thick wall, supporting mirrored layouts across paired panels.
This shelf rest is solid steel with a nickel-plated finish, providing a metal support surface that visually coordinates with other nickel hardware.
The Straight Shelf Support with 5mm Peg from Selby Furniture Hardware combines a 5 mm steel pin, 5/16 inch diameter rest, and nickel-plated finish, giving cabinet and closet projects a consistent support point in 5 mm bored panels. With a pin length that works on both sides of a 5/8 inch thick wall and a protrusion of 19/32 inch, it helps establish repeatable shelf positions across multiple units. For projects built around 5 mm hole borings and standard shelf layouts, the X3014K shelf support offers a defined set of dimensions that align cleanly with common cabinet drilling setups.
Sold In: 1 Each