Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Glass shelf support with tread from Selby Furniture Hardware is a nickel-plated steel shelf support designed to hold glass shelves securely. The nickel-plated steel construction provides a hard, stable bearing surface so the support resists deformation under normal cabinet loads. Anti-skid rubber treads on the support contact area help keep the glass shelf from sliding, which is important when doors are opened or closed repeatedly. The design focuses on keeping the glass in place, so alignment stays consistent over time. This glass shelf support belongs to the shelf supports class, so it is intended specifically for supporting shelving in cabinets, closets, and similar installations where a small bearing footprint and dependable positioning are needed.
The 5 mm shank on this glass shelf support is sized for cabinets drilled with 5 mm system holes, so it presses into the sidewall without additional hardware steps. With a 9 mm shank length, the support engages deeply in the panel, which helps stabilize the pin when inserting or removing shelves during layout changes. Because the shank dimensions permit entry into a 3/4 inch sidewall from both sides, the support works in through-bored panels where holes are open on the cabinet interior and exterior. The 3/8 inch shelf rest extension provides clear support under the glass edge, which helps set repeatable overhang and makes it easier to line up multiple supports at the same projection.
This nickel-plated steel shelf support with anti-skid rubber treads is suited to cabinets, closets, and organizational units that use glass shelving. The 5 mm shank matches common cabinet hole systems, so it integrates into projects already laid out on 32 mm-style patterns or other 5 mm drilling schemes. Because the shank permits entry into a 3/4 inch sidewall from both sides, it works well in cases built from 3/4 inch panels where through-holes are used for adjustable shelves. The 3/8 inch shelf rest extension supports the glass near the panel line, so shelving can sit close to the cabinet side for a clean appearance while still resting fully on metal-backed rubber.
The anti-skid rubber treads on the bearing surface interact with the glass edge to reduce slipping, which helps keep shelves aligned when loads shift or doors move. Three rubber donuts between the glass and the metal shelf rest create cushioned contact points, so the glass touches rubber instead of bare steel and is less likely to develop surface scratches during installation. The nickel-plated steel body provides a consistent thickness and shape, so using multiple supports of this type along a run results in even shelf height and a uniform look. With a 5 mm diameter by 9 mm long shank, each support seats consistently in sidewall holes, which helps maintain the same projection and bearing height across all positions.
The glass shelf support uses a 5 mm diameter shank that is 9 mm long, which matches 5 mm sidewall holes and provides deep engagement in the panel.
The anti-skid rubber tread grips the glass shelf surface to reduce sliding, which helps maintain shelf position during normal use of the cabinet or closet.
The 3/8 inch shelf rest extension provides a defined bearing area under the glass edge, supporting the load while keeping the shelf close to the cabinet side.
The three rubber donuts sit between the glass and the metal rest, so the glass contacts rubber instead of steel, reducing the chance of scratching during placement.
This shelf support has a shank that permits entry into a 3/4 inch sidewall from both sides, so it suits cabinets made from 3/4 inch panels with through-holes.
The Selby glass shelf support is nickel-plated steel, providing a rigid metal body with a plated surface for a clean, finished appearance in cabinet interiors.
This non-skid straight glass shelf support with tread from Selby Furniture Hardware combines a 5 mm by 9 mm shank, 3/8 inch shelf rest extension, and rubber-treaded support surface to hold glass shelves securely. The ability to enter a 3/4 inch sidewall from both sides gives flexibility in cabinet construction using through-bored panels. For projects needing nickel-plated steel supports with anti-skid rubber contact under glass shelves, this shelf support aligns well with typical cabinet and closet layouts.
Sold In: 100 Each