Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Clamping glass shelf supports 9 mm bore from Selby Furniture Hardware use a nickel-plated steel body to hold glass shelves in place, giving a sturdy metal base for typical cabinet or closet applications. The design uses a nylon suction cup and fastening clip to lock the glass, so the shelf seats against a cushioned contact point while being mechanically retained. This support fits 3/16 to 1/4 inch thick glass, covering common glass shelf sizes used in residential and commercial cabinetry. A brass expansion bushing inserts into a 9 mm hole in the sidewall, so the shelf support anchors directly into a precisely bored hole. When the screw is driven, the bushing opens to lock into the hole, creating a tight grip in the side panel that resists pullout during loading and unloading of the shelf.
This glass shelf support uses a brass expansion bushing sized for a 9 mm hole in the cabinet sidewall, so drilling operations can be set up around a consistent bore diameter. Once the bushing is inserted into the hole and the screw is driven, the bushing opens inside the panel, creating a wedging effect that holds the support firmly in position. The support projection is 3/4 inch, which establishes the working depth of the shelf from the sidewall and helps align multiple supports along a run. The shelf is raised 11 mm, or 7/16 inch, above the hole location, so the vertical centerlines for drilling can be planned to produce the desired finished shelf height across a bank of cabinets.
The Selby Furniture Hardware X450BAG glass shelf support is part of the shelf, closet, and garage organization class, so it suits projects where glass shelves are integrated into storage runs. The support fits 3/16 to 1/4 inch thick glass, placing it in the range often used for display shelves in cabinet interiors and similar applications. With a projection of 3/4 inch, the support sets the shelf out from the sidewall at a predictable distance, which is useful when aligning glass with face frames or surrounding panels. The shelf height is 11 mm above the hole location, so installers can plot bore lines knowing how the finished shelf edge will sit relative to cabinet features such as doors, dividers, or lighting. The nickel-plated steel body gives the hardware a metal finish that coordinates with typical cabinet hardware environments while providing a robust base under the glass.
The brass expansion bushing on this glass shelf support is designed for a 9 mm sidewall bore, so a single drill size handles all support positions and speeds layout across multiple cabinets. When the screw is inserted and tightened, it opens the bushing inside the hole, so the support becomes mechanically locked to the panel and resists loosening under normal shelf loading. The nylon suction cup and fastening clip work together to hold the glass, so the shelf is both cushioned and clamped, helping the installer achieve consistent seating along the run. Because the support fits 3/16 to 1/4 inch glass, a range of common shelf thicknesses can be handled without changing hardware style when replacing or adding shelves. The 3/4 inch projection and 11 mm raise above the bore center create a predictable geometry, so repeating these dimensions from cabinet to cabinet yields uniform shelf lines and a consistent finished appearance.
The X450BAG glass shelf support fits 3/16 to 1/4 inch thick glass, so it covers common shelf glass sizes used in cabinet and closet installations.
The brass expansion bushing inserts into a 9 mm sidewall hole, and tightening the screw opens the bushing so it locks into the bore and anchors the support.
The nylon suction cup cushions the glass and helps lock it in place, so the shelf rests against a softer contact area instead of directly on metal.
This glass shelf support raises the shelf 11 mm, or 7/16 inch, above the hole location, which sets the finished shelf height relative to the bore line.
The glass shelf support has a projection of 3/4 inch, so it positions the shelf that distance from the cabinet sidewall during layout and installation.
The fastening clip works with the suction cup to secure the glass edge, so the shelf is held in place and remains aligned during regular use.
The X450BAG nickel-plated steel glass shelf support with suction cup and fastening clip provides a locking interface for 3/16 to 1/4 inch glass using a 9 mm bore and brass expansion bushing. Use these defined projection and height dimensions to plan consistent, repeatable glass shelf runs across cabinets and storage installations.
Sold In: 250 Each