Schaub Modern Handle Centers 7-9/16" is a zinc die cast cabinet pull from the Italian Designs collection that provides a modern gripping point across cabinet or drawer fronts, giving a consistent look when you are laying out runs of decorative hardware. The 192mm center to center drilling positions the handle for standard cabinet boring patterns, helping align multiple doors and drawers on the same project. Its Satin Nickel finish creates a smooth, neutral surface over the zinc material, supporting use with a wide range of cabinet colors in kitchens, baths, and built-ins. The overall length of 8-1/8" gives extra hand clearance across wider drawer faces, while the 7/8" projection holds the pull off the surface enough for comfortable grasping. A 1/2" width keeps the profile visually light while still giving a defined gripping edge.
This Schaub & Company Modern Handle uses a 192mm center to center layout, which places mounting points at 7-9/16" apart to match the specified drilling for this model. That spacing guides jig setup when drilling through cabinet doors or drawer fronts. The handle length of 8-1/8" means the pull overhangs the hole spread slightly on each side, giving a balanced margin at the ends. With a projection of 7/8", the grip stands off enough from the surface to clear fingers between the pull and the cabinet face. The 1/2" width concentrates the contact area along a slim bar, which helps position the pull neatly on narrow stile sections as well as wider rail sections.
The Schaub satin nickel cabinet pull from the Italian Designs collection is suited to cabinet and drawer fronts where a modern handle style is desired, because its smooth Satin Nickel finish and straight Modern Handle profile coordinate with contemporary door and drawer designs. In kitchen or bath runs, the 8-1/8" length works across sink base doors, standard drawer banks, and taller pantry doors by giving a longer gripping surface than a small knob. The 192mm center to center drilling fits layouts that are planned around this metric spacing, so the same pull can be used repeatedly along wall and base cabinets. On built-in cabinets or shop storage, the 7-9/16" center to center measurement lets you repeat the same boring pattern, so drawer fronts and doors share the same visual rhythm. The 1/2" width helps this pull sit comfortably on face frames or frameless fronts without overpowering narrower rail sections.
The Italian Designs zinc die cast pull construction provides a defined Modern Handle form, so every 223-15S pull has the same feel when mounted side by side on a large installation. The 7/8" projection maintains a predictable stand-off distance from the cabinet face, which keeps hand clearance similar across both doors and drawers. Because the center to center dimension is specified at 192mm, installers can set drilling guides or boring machines precisely to that measurement and repeat it across multiple fronts. The overall 8-1/8" length gives a known edge distance beyond the mounting holes, which simplifies layout when aligning the ends of the handle with panel details or drawer edges. With Satin Nickel as the finish, the pulls maintain a uniform appearance along the full run, supporting a clean line of hardware across uppers, bases, and tall cabinets in the same project.
The Schaub 223-15S pull has 192mm, or 7-9/16 inch, center to center spacing, so hole locations follow that measurement across cabinet doors and drawer fronts.
The Schaub Modern Handle Centers 7-9/16 pull has an overall length of 8-1/8 inches, which provides extra grip span beyond the mounting holes on each end.
The Italian Designs 223-15S pull is made from zinc die cast material, giving a formed metal handle with consistent shape across multiple pieces.
The Satin Nickel cabinet pull has a projection of 7/8 inch, holding the grip off the cabinet face for comfortable finger clearance.
The Schaub & Company Modern Handle has a width of 1/2 inch, giving a slim bar profile that suits both narrow and wider cabinet fronts.
The 223-15S Italian Designs pull uses a Satin Nickel finish, creating a smooth, neutral surface that works with many cabinet colors.
The Italian Designs Schaub satin nickel cabinet pull with 192mm, 7-9/16 inch, center to center drilling, 8-1/8 inch length, and 7/8 inch projection offers defined dimensions that support planned cabinet layouts. At Wurth Baer Supply, this Modern Handle profile from Schaub & Company provides a consistent Satin Nickel option when you are standardizing hardware across multiple cabinet runs. Using the known center to center spacing, width, and projection, you can match this zinc die cast handle to door and drawer fronts that are laid out around the 223-15S pattern.