Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Italian Designs Series mosaic knob is a zinc die cast cabinet knob from Schaub and Company, so it gives you a decorative pull point built on a stable metal body for everyday cabinet and furniture use. The French antique bronze finish defines the appearance of this knob, which sets a warm, traditional tone on doors or drawers in kitchens, baths, or built-ins. The knob length of 1-7/8 inches sets the overall footprint you have to grasp, which suits standard cabinet fronts where you want a noticeable, substantial handhold. A projection of 7/8 inch sets how far the knob stands off the front, providing finger clearance while keeping profiles tight to the face of the cabinet. The width of 1-7/8 inches matches the length dimension, creating a balanced, mosaic face that reads as a square-like pull point when mounted.
The knob uses an 8-32 screw thread, which matches a common cabinet hardware standard and ties into many existing drilled and tapped layouts on cabinet doors or drawer fronts. A center to center dimension of 1-1/4 inches sets the mounting hole spacing, which matters when you are drilling new holes or aligning to existing patterned bores in wood or composite materials. The base diameter of 1-5/8 inches defines the contact ring against the surface, which helps distribute pull forces over a broader area on the cabinet face. The projection of 7/8 inch determines how far the gripping point stands away from the door, which affects finger clearance when the knob is installed near adjacent doors or face frames.
This Schaub and Company Italian Designs Series mosaic knob works within decorative hardware and moldings projects where handles and pulls define the finished look, because the French antique bronze finish coordinates with similar bronze cabinet components. The 1-7/8 inch length and matching 1-7/8 inch width give this knob a larger face than many small pulls, which helps it stand out visually on wider doors, pantry fronts, or furniture pieces. The 1-5/8 inch base diameter creates a substantial contact circle at the mounting point, which can help visually cover older mounting scars when refreshing existing cabinet fronts. With a projection of 7/8 inch, the knob remains low-profile relative to the door plane, which is useful on tight walkways or galley kitchens where extended projections can snag clothing. The decorative mosaic design is expressed across the 1-7/8 inch face, which allows the pattern to read clearly when aligned in rows on banks of drawers.
The Italian Designs Series cabinet hardware uses an 8-32 x 1 inch screw size in its description, which connects the knob to a widely used machine screw thread that matches many cabinet drilling jigs and shop standards. That standardized 8-32 interface simplifies layout across multiple doors, because the same tap and bore planning can carry across an entire run of cabinets. The center to center distance of 1-1/4 inches sets a fixed two-hole pattern for this knob, which is important when spacing multiple pulls along drawer banks where repeatable alignment matters visually. That 1-1/4 inch spacing also lets this knob fit into many common drilling templates used in professional cabinet shops, which supports faster repetitive installation on large jobs. The defined 7/8 inch projection provides a known stand-off, which helps when coordinating with adjacent handles and pulls so different hardware types align in similar depth from the cabinet face.
The Italian Designs Series mosaic knob has a length of 1-7/8 inches and a matching width of 1-7/8 inches, which creates a broad, square-like pull area suited to standard cabinet doors and drawers.
The Schaub and Company mosaic knob has a projection of 7/8 inch, which sets how far it stands off the cabinet face and provides finger clearance without extending too far into the room.
This mosaic cabinet knob uses a 1-1/4 inch center to center dimension, which defines the spacing between mounting holes when drilling or aligning to existing bores on cabinet fronts.
The Italian Designs Series knob is specified with an 8-32 x 1 inch screw size, which matches a common cabinet hardware machine screw thread used across many woodworking projects.
This mosaic knob is made from zinc die cast material, which gives the cabinet hardware a solid metal body for regular door and drawer operation.
The Schaub and Company mosaic knob has a French antique bronze finish, which sets a bronze-toned appearance that coordinates with similar decorative cabinet hardware.
The Italian Designs Series mosaic knob from Schaub and Company brings a 1-7/8 inch length and width, 7/8 inch projection, and 1-5/8 inch base diameter together with a French antique bronze finish, so it suits cabinet projects needing matching bronze decorative hardware. With a 1-1/4 inch center to center dimension and 8-32 x 1 inch screw specification, this knob aligns with common cabinet drilling patterns, supporting consistent installation across doors and drawers when you standardize on this style.
Sold In: 1 Each