SATIN NICKEL WAVE PULL, 64 MM C/C describes a Schaub and Company cabinet pull designed for jobs that call for a clean satin nickel look with a defined wave profile. The pull is part of the Italian Designs Series, so it follows a coordinated style language that helps multiple doors and drawers read as one system across a project. Its zinc die cast construction provides a solid metal body that supports everyday cabinet use in kitchens, baths, or built-ins where hardware sees regular handling. The satin nickel finish controls glare and fingerprints compared with bright polished surfaces, which keeps fronts looking consistent between cleanings. With a center to center of 2-1/2 inches, the pull lines up with a common drilling pattern, which matters when matching or reworking existing layouts. Overall, it functions as a straightforward decorative and functional handle for cabinet doors and drawers.
The stated center to center of 2-1/2 inches defines the exact distance between mounting points, which guides drilling jigs and layout marks on doors or drawers. The overall length of 3-5/8 inches shows how far the pull extends along the face, which matters when positioning hardware relative to rail widths or neighboring pulls. A projection of 7/8 inch describes how far the pull stands off the surface, giving predictable finger clearance behind the grip on thicker fronts. The width of 3/4 inch defines the front profile, which helps plan spacing on narrow rails or where pulls sit close to adjacent edges. Together, these dimensions support consistent alignment across multiple fronts on a run of cabinets.
This pull belongs to the Italian Designs Series from Schaub and Company, placing it within a decorative hardware family aimed at cabinets and similar casework. The satin nickel finish supports use on cabinet doors and drawers where a subdued metallic tone is preferred over bright finishes, such as contemporary kitchens or office built-ins. Being a zinc die cast pull, it is suited to furniture-style cabinets and standard residential or light commercial millwork that uses metal handles for everyday access. The SAP description identifying it as SATIN NICKEL WAVE PULL, 64 MM C/C associates it with cabinet hardware layouts using 64 mm or 2-1/2 inch center spacing, which appears frequently on many stock and semi-custom cabinets. Its 3-5/8 inch length allows it to sit comfortably on both smaller drawer fronts and medium-width doors without overwhelming narrow stiles.
The center to center measurement of 2-1/2 inches provides a fixed reference for drilling, which helps installers set up jigs or templates for repeatable hole placement across multiple doors and drawers. The 7/8 inch projection gives consistent stand-off from the face, so hands clear the surface similarly on every front, which is useful when matching lines across high and base cabinets. With a 3/4 inch width, the pull presents a controlled front profile, aiding alignment when hardware must sit visually centered on narrow stiles or rails. The combination of 3-5/8 inch overall length and the defined wave shape, as captured in the SATIN NICKEL WAVE PULL, 64 MM C/C description, establishes a predictable grip area, supporting smooth operation on frequently used fronts. The manufacturer part number 244-064-15 uniquely identifies this exact satin nickel version, which matters when reordering or matching existing Schaub and Company hardware on later phases.
This pull is described as SATIN NICKEL WAVE PULL, 64 MM C/C within the Italian Designs Series, so it suits cabinet doors and drawers where a coordinated satin nickel decorative handle is desired.
The pull has a 2-1/2 inch center to center, which sets a fixed hole spacing that aligns with common cabinet drilling patterns and supports repeatable layout using jigs or templates.
The 3-5/8 inch length defines how much frontal space the pull occupies, helping installers position it comfortably on narrow drawer fronts or medium-width cabinet doors.
The 7/8 inch projection establishes how far the pull stands off the cabinet face, providing finger clearance behind the grip while keeping the hardware profile relatively low.
The 3/4 inch width defines the front profile of the pull, which aids in centering it on narrow rails and maintaining even visual spacing between adjacent cabinet hardware.
This pull is made from zinc die cast material, giving it a solid metal body that supports regular cabinet use on doors and drawers handled many times each day.
The Italian Designs Series, Zinc Die Cast Pulls 2-1/2" c/c, Satin Nickel Finish from Schaub and Company pairs a 2-1/2 inch center to center with a 3-5/8 inch overall length, 7/8 inch projection, and 3/4 inch width, giving clear dimensional data for cabinet layout. The SATIN NICKEL WAVE PULL, 64 MM C/C description and part number 244-064-15 point directly to this specific satin nickel wave profile. For cabinet runs built around satin nickel hardware and 64 mm or 2-1/2 inch hole spacing, this pull offers a defined option to specify and repeat across the project.