French Farm Series zinc die cast pull gives cabinets and furniture a consistent French Farm look, which helps tie a run of doors and drawers together on kitchens or built-ins. Schaub and Company branding identifies the pull as part of a decorative hardware line aimed at detailed projects, so it suits work where finish and profile matter. Antique nickel finish provides an aged-metal appearance on the pull surface, which fits traditional or rustic design schemes that call for warmer metal tones. The 11-3/4 inch overall length spans wider drawer fronts visually, helping balance larger faces. An 8 inch center to center dimension sets the hole spacing, which matches layouts designed around that 8 inch spread. A projection of 1-3/8 inches defines how far the pull stands off the face, giving hand clearance without pushing too far into tight walkways. Width of 1-1/4 inches sets a comfortable gripping surface across the pull.
The 8 inch center to center value on this French Farm Series pull defines the drilling pattern, so holes on cabinet doors or drawers follow that fixed spacing for alignment. Using an 8 inch layout keeps hardware consistent across banks of drawers built to the same plan. Overall length of 11-3/4 inches means the pull extends past the mounting holes toward each end, so it fills more of the drawer rail and can be centered visually on wider faces. With a projection of 1-3/8 inches, the pull stands off enough to grasp from above or below, which helps on both upper and lower cabinets. A width of 1-1/4 inches across the front face offers a solid contact area, which is useful when users pull at different angles.
The French Farm Series identity ties this Schaub and Company pull to French Farm style cabinetry, which supports use on traditional or farmhouse kitchens. Antique nickel finish helps the pull blend with other antique nickel hardware in a space, keeping hinges and knobs visually coordinated. The 8 inch center to center spacing suits medium to wider drawers or tall doors, because the longer grip length visually scales with larger faces. At 11-3/4 inches overall length, the pull stretches across more of the panel width, helping break up broad drawer fronts on islands or base cabinets. The 1-3/8 inch projection gives room behind the bar for a full hand, which is helpful on heavier storage drawers where users pull harder. Zinc die cast construction keeps each pull dimensionally similar, so multiple pieces line up cleanly on long cabinet runs and built-ins.
The 8 inch center to center measurement on this 263-AN antique nickel pull acts as a repeatable layout reference, so jigs or drilling templates can be reused across a project for even spacing. When all fronts share that 8 inch pattern, sight lines across drawer banks stay straight. Overall length of 11-3/4 inches lets installers position the pull with predictable margins from drawer edges, which simplifies marking during production work. The 1-1/4 inch width presents a stable gripping bar, giving users a confident feel even when opening tall pantry doors. Projection at 1-3/8 inches positions fingers away from the cabinet face, which helps reduce knuckle contact with the surface as doors swing. Zinc die cast material supports crisp detailing around the French Farm profile, so shadow lines read cleanly under normal room lighting. The antique nickel finish across that profile softens reflections, which keeps fingerprints less prominent during everyday use.
The French Farm Series zinc die cast pull has an 8 inch center to center dimension, which sets the drilling distance between mounting points on cabinet doors or drawers.
The Schaub and Company French Farm pull measures 11-3/4 inches in overall length, so it spans a wide section of the drawer or door front for visual balance.
The antique nickel cabinet pull projects 1-3/8 inches from the mounting surface, providing space behind the pull for fingers when opening doors and drawers.
The 263-AN antique nickel pull is made from zinc die cast material, giving consistent dimensions and a defined profile across multiple pieces on a project.
The French Farm drawer pull uses an antique nickel finish, providing a muted, aged-metal appearance that suits traditional and farmhouse style installations.
This French Farm Series zinc die cast pull is manufactured by Schaub and Company, placing it within a coordinated decorative hardware collection.
The French Farm Series zinc die cast pull in antique nickel finish offers an 8 inch center to center layout, which fits projects designed around that hole spacing. Its 11-3/4 inch length and 1-3/8 inch projection support comfortable use on wider drawers and taller doors. Zinc die cast construction and Schaub and Company branding position it as part of a coordinated decorative hardware line, useful when repeating the style across an entire room. For cabinetry or furniture calling for French Farm styling with antique nickel metalwork, this pull matches the dimensions and finish needed to carry that look through.