Cup Pull 3 in Center to Center from the French Farm collection by Schaub and Company provides a cup-style grip that suits cabinet and drawer fronts where a 3 inch center-to-center layout is already planned or installed. The Ancient Bronze finish defines the visual tone of the pull, giving a consistent look when matching other Ancient Bronze components on the same run of cabinetry. Zinc die cast construction shapes the cup profile while maintaining a solid feel when mounted to wood fronts. The stated 4-3/4 inch length sets the overall footprint on the face of the cabinet, framing the cup opening in a predictable way for layout. A 1-1/8 inch projection positions the grip off the face enough for fingers to catch the edge comfortably during everyday use.
The 3 inch (76 mm) center to center measurement defines the hole spacing required in the cabinet or drawer front, guiding drilling or confirming fit to existing 3 inch layouts. This dimension is a standard spacing in decorative handles and pulls, which is useful when replacing older hardware that shares the same 3 inch pattern. The 2 inch width identifies the vertical footprint of the cup on the face, helping position the pull so it clears panel profiles or decorative edges. The 8-32 screw size specifies the thread that mates with the pull, aligning with common cabinet hardware drilling and tap standards in many woodworking shops.
The French Farm collection reference positions this pull for cabinets and drawers where a coordinated decorative hardware theme is desired across a kitchen, bath, or built-in installation. Its 3 inch center to center dimension suits doors and drawers already bored to that spacing, so it can step into existing 3 inch layouts without shifting hole positions. The 4-3/4 inch overall length gives this cup pull a presence that works on both standard-width drawer fronts and many medium-size cabinet doors, balancing the face without overwhelming smaller sections. With a 2 inch width, the pull sits comfortably on rails or flat center panels, staying inside most edge profiles while still leaving enough face material around the hardware.
The specified 1-1/8 inch projection determines how the hand approaches the pull, giving a consistent gap for fingers to hook underneath the cup lip on repeated openings throughout the day. The Ancient Bronze finish acts as the visual anchor for the hardware run, so matching additional French Farm pieces in the same finish keeps the installation visually tied together from base cabinets to uppers. Zinc die cast construction gives Schaub 265-ABZ a well-defined shape that holds its profile at the edges and curves, which is useful when aligning multiple pulls in a straight line where consistent sightlines are important. The 8-32 screw thread standard aligns with widely used cabinet hardware fasteners, simplifying selection when mounting into typical drawer and door materials and supporting straightforward swaps from other 8-32 based pulls.
This cup pull uses a 3 inch (76 mm) center to center spacing, which sets the distance between mounting holes and matches many standard cabinet and drawer layouts.
The Schaub 265-ABZ pull has an overall length of 4-3/4 inches, a width of 2 inches, and a projection of 1-1/8 inches, defining its footprint and hand clearance on the cabinet face.
This French Farm cup pull is made from zinc die cast, creating a shaped metal body that supports regular use on cabinet and drawer fronts.
This 3 inch cabinet cup pull uses an Ancient Bronze finish, which sets its color and surface character for coordinating with other bronze-tone hardware.
This cabinet pull is designed for 8-32 screw threads, aligning with a common cabinet hardware standard used for mounting into doors and drawers.
This Ancient Bronze cup pull is part of the French Farm collection by Schaub and Company, supporting coordinated decorative hardware selections across a project.
This Ancient Bronze French Farm cup pull combines a 3 inch center to center layout with a 4-3/4 inch overall length, giving a predictable footprint on doors and drawers. When a project calls for zinc die cast construction, 8-32 screw threading, and the specific Ancient Bronze finish, Schaub and Company part 265-ABZ offers a defined set of dimensions for planning consistent cabinet hardware runs.