Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Firenza Series zinc die cast pull from Schaub and Company combines a light Firenza bronze finish with a cabinet-ready handle length, so it serves both decorative and functional roles on doors and drawers. The zinc die cast material forms a solid pull body, which supports repeatable handling on frequently used cabinet fronts. A light Firenza bronze finish covers the pull, creating a consistent color tone that coordinates with other bronze-finished hardware in the same space. The handle spans 6-1/8 inches in overall length, giving fingers space to grab across wider drawer faces while keeping a proportional look on standard cabinet widths. A projection of 7/8 inch sets the gripping area slightly off the door face, which helps hands clear the cabinet surface during use. A 1 inch height establishes a compact profile, so the pull stands off the face enough for grip without dominating the cabinet front.
The 3-3/4 inch center to center dimension defined for this Firenza Series pull sets one mounting option that matches common cabinet drilling patterns, which supports straightforward alignment on many door and drawer layouts. A second 5-1/16 inch center to center dimension on the same pull offers an extended mounting span, which allows installers to use a wider hole spread when the design or cabinet scale calls for a longer visual footprint. Both center to center measurements are set in the same pull body, so hardware layouts can follow either drilling pattern while keeping a single handle style throughout the job. The specified screw size of 8-32 x 1 inch defines the thread and length needed at each mounting point, which helps the pull seat firmly against typical cabinet door or drawer front thicknesses.
This light Firenza bronze pull from the Firenza Series is designed as a cabinet handle with defined center to center dimensions of 3-3/4 inch and 5-1/16 inch, which positions it for use on both doors and drawers that follow these drilling patterns. The 6-1/8 inch total length lets the handle span a visible portion of the front, so it presents as a design element on wider drawers while still fitting comfortably on standard cabinet doors. A projection of 7/8 inch means the gripping area stands off the face enough for fingers to wrap around the pull, which supports opening heavier drawers or full-height pantry doors without hand strain from pinched spacing. The 1 inch height keeps the handle compact relative to the door stile or drawer rail, which helps maintain clean lines on modern or transitional cabinet designs where hardware is intended to sit close to the surface.
The defined 3-3/4 inch and 5-1/16 inch center to center measurements on this Schaub and Company pull provide fixed reference points for drill jigs and templates, which lets installers repeat the same hole spacing across a kitchen or bank of casework. Because the pull uses a zinc die cast body, each piece follows the same molded geometry, which supports straight visual alignment when multiple pulls are mounted in rows. The light Firenza bronze finish creates a uniform surface color over that geometry, which helps a run of doors read as a single coordinated installation rather than a mix of slightly different tones. The 8-32 x 1 inch screw size specification gives a standard fastener length and thread, which streamlines hardware selection when preparing doors and drawer fronts with consistent thickness. Together, these defined dimensions and material choices help reduce layout adjustments on site and support a uniform look across the finished cabinetry.
The Firenza Series zinc die cast pull provides 3-3/4 inch and 5-1/16 inch center to center options, giving two mounting spans that match common cabinet drilling layouts.
The light Firenza bronze cabinet pull measures 6-1/8 inches in overall length, which helps it visually fit standard cabinet doors and wider drawer fronts.
The 280-LFBZ cabinet handle is made from zinc die cast material, creating a solid metal pull body with consistent molded dimensions for alignment.
The zinc die cast cabinet handle projects 7/8 inch from the cabinet surface, giving finger clearance between the grip and door or drawer front.
This Schaub and Company Firenza pull uses a light Firenza bronze finish, providing a defined bronze tone that coordinates with similar finishes in a space.
The Firenza Series zinc die cast pull is specified for 8-32 x 1 inch screws, matching common cabinet hardware threading and length for door and drawer fronts.
The Firenza Series zinc die cast pull in light Firenza bronze from Schaub and Company offers defined 3-3/4 inch and 5-1/16 inch center to center options, a 6-1/8 inch length, and 7/8 inch projection, giving you clear dimensions to plan layouts on new cabinetry or hardware updates. With its zinc die cast construction and specified 8-32 x 1 inch screw interface, this handle suits projects where consistent hole spacing and a coordinated bronze finish across multiple doors and drawers are priorities. Use these measurements and finish details to align this pull with your cabinet fronts and aesthetic goals, then add it to your hardware schedule to keep the job moving.
Sold In: 1 Each