
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Firenza Series zinc die cast pulls give you a 3-3/4 inch center to center handle that works well across cabinet doors and drawers where a consistent drill pattern is needed. The pull is made from zinc die cast material, which provides a solid metal feel during daily use in residential or shop-built cabinetry. Its 4-7/16 inch overall length spans slightly wider than the bore pattern, helping visually balance standard cabinet fronts. The Firenza silver finish provides a distinct Firenza Silver look that coordinates with hardware specified in the same finish. A projection of 7/8 inch sets the gripping surface off the cabinet face so fingers clear the door or drawer front in normal operation. The 1-1/8 inch height supports a comfortable grasp, helping users open and close cabinetry without crowding their knuckles against the surface.
This Firenza silver cabinet pull is specified with a 3-3/4 inch center to center measurement, so installers position mounting holes at that spacing for proper alignment. The 4-7/16 inch overall length means the handle extends beyond the bore pattern at each end, which can help visually center the hardware on rails and stiles. With a 7/8 inch projection, the pull stands off the cabinet surface, leaving room for fingers between the handle and door face during operation. The stated 1-1/8 inch height gives fabricators a reference dimension for clearances near adjacent doors, walls, or appliance panels. Using these defined measurements, shops can set up jigs or drilling guides around the 96 mm center to center standard and repeat the layout accurately from part to part.
The Schaub and Company Firenza Series pull in Firenza silver finish is suited to cabinet projects that call for a 96 mm center to center layout. By using the 3-3/4 inch center to center measurement, cabinetmakers can standardize drilling across face-frame or frameless cabinetry that follows this pattern. The zinc die cast material supports use on frequently handled components such as kitchen drawers, bath vanities, or shop casework doors. Because the overall length is 4-7/16 inches, the pull visually fits on typical door rails and drawer fronts without overwhelming narrower faces. The Firenza silver finish coordinates with other Firenza Silver items specified under the same naming, supporting cohesive hardware selections on multi-room projects that rely on consistent trim details.
The Firenza Series zinc die cast pulls use a defined 96 mm, or 3-3/4 inch, center to center spacing, which helps fabricators create repeatable jigs for drilling and boring operations. This precise spacing simplifies batch production for door and drawer fronts in custom shops or small production runs. The 7/8 inch projection sets a predictable standoff from the front, allowing planners to account for hand clearance when pulls are placed near adjacent cabinetry or walls. With a 1-1/8 inch height, the pull has a known profile that can be factored into layout decisions near countertops or trim. The 4-7/16 inch overall length also helps align the pull proportionally with panel widths. Together, these defined dimensions help reduce rework on installations that rely on accurate hardware placement using this specific Schaub Firenza Series part number 281-FS.
The Firenza Series pull has a 3-3/4 inch, or 96 mm, center to center dimension, which sets the exact spacing for drilling the mounting holes on cabinet doors and drawers.
The Firenza Series pull is made from zinc die cast material, giving the handle a solid metal construction suited to regular cabinet use in typical woodworking environments.
The Firenza silver cabinet pull has a 4-7/16 inch overall length, so it extends slightly beyond the mounting holes and provides more visual coverage across the cabinet face.
The Schaub Firenza pull projects 7/8 inch from the cabinet face, creating space for fingers to grip the handle comfortably when opening doors and drawers.
The 281-FS Firenza pull uses a Firenza Silver finish, aligning the color and surface appearance with other Firenza Silver decorative hardware items.
The Firenza Series cabinet pull has a 1-1/8 inch height, giving installers a reference profile when planning clearances near countertops, trim, or adjacent cabinet components.
This Firenza Series, zinc die cast pull from Schaub and Company pairs a 3-3/4 inch center to center layout with a Firenza silver finish, giving cabinet projects a defined 96 mm drilling pattern and coordinated appearance. With its 4-7/16 inch overall length, 7/8 inch projection, and 1-1/8 inch height, the handle offers clear dimensions that support consistent hardware placement. For work that specifies Firenza Silver decorative hardware, this 281-FS pull allows shops and installers to match the finish and measurements across doors and drawers using the same standard.
Sold In: 1 Each