Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dark Firenza Bronze cup pull from the Firenza collection by Schaub and Company gives cabinets a defined grasp point along a 3-3/4 in center to center span, which helps align multiple doors and drawers in a consistent, measured layout. Its zinc die cast material creates a solid, unified body, which supports repeatable drilling and mounting across a run of cabinets. The Dark Firenza Bronze finish sets a steady visual line on face frames, which matters when matching pulls across a kitchen, bath, or built-ins. At 4-11/16 in overall length, the pull bridges the rail area of standard cabinet fronts, which helps balance the hardware visually on wider drawer faces. A 1-1/2 in height profile defines hand clearance above the pull, which affects how comfortably fingers catch the edge in daily use.
This cup pull uses a 3-3/4 in (96 mm) center to center mounting layout, which lets installers use standard 96 mm drilling patterns to keep hardware lines straight across banks of drawers. The specified 8-32 x 1 in screw size matches a common cabinet hardware thread, which aligns with standard boring on typical door and drawer fronts. With a 4-11/16 in overall length and 1-1/2 in height, the pull occupies a defined rectangle on the face, which helps lay out consistent margins from top rails or side stiles. A 9/16 in projection establishes a low-profile stance off the surface, which is useful where fronts need a grasp point without extending far into working aisles.
The Firenza cup pull from Schaub and Company belongs to the Firenza collection, which groups it with hardware sharing the same Dark Firenza Bronze finish, so runs of cabinets can carry a unified appearance. Its 3-3/4 in (96 mm) center to center size matches a common cabinet pull layout, which suits standard kitchen and bath cabinetry that already follows this drilling pattern. The 4-11/16 in overall length covers enough width on a typical drawer front to look proportionate on both small and mid-size drawers, which supports using the same model in several positions. With 9/16 in projection, the pull stays relatively close to the door or drawer surface, which helps when clearances in front of cabinetry are tight. The 1-1/2 in height defines a compact vertical profile, which fits narrower rails without overpowering the face frame or slab.
The 3-3/4 in (96 mm) center to center measurement on this cup pull gives installers a repeatable drilling reference, which reduces layout time when hardware must align across multiple cabinet runs. Its zinc die cast material provides a uniform casting, which helps each pull match the others in shape for clean visual lines along a bank of doors. The specified 8-32 x 1 in screw size coordinates with common cabinet construction thicknesses, which supports reliable engagement into the pull body. Combined 4-11/16 in length and 9/16 in projection define a stable handhold, which aids in smooth drawer operation once installed. The Dark Firenza Bronze finish ties these dimensions together visually, which matters when hardware must coordinate with other Dark Firenza Bronze pieces on the same project.
The Dark Firenza Bronze cup pull has a 3-3/4 in (96 mm) center to center dimension, which sets the hole spacing for drilling jigs and cabinet layout.
The Firenza cup pull measures 4-11/16 in in overall length and 1-1/2 in in height, which defines the footprint it covers on a door or drawer front.
The Schaub 282-DFBZ cup pull projects 9/16 in from the cabinet surface, which keeps the profile low while still allowing fingers to catch the pull.
The Firenza collection cup pull is zinc die cast, which creates a solid casting suitable for typical cabinet door and drawer use.
This 96 mm cabinet cup pull uses a Dark Firenza Bronze finish, which coordinates with other Dark Firenza Bronze hardware on a project.
This Dark Firenza Bronze cabinet pull uses 8-32 x 1 in screws, which matches a common thread and length used in cabinet hardware installation.
The Dark Firenza Bronze cup pull, Schaub and Company part 282-DFBZ, ties a 3-3/4 in (96 mm) center to center layout to a 4-11/16 in length and 9/16 in projection, giving installers predictable drilling and clearance. Its zinc die cast construction and Dark Firenza Bronze finish align with the Firenza collection, which helps coordinate hardware across a room. For projects built around this center to center size and finish, this pull offers a defined footprint that supports consistent cabinet layouts.
Sold In: 1 Each