Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Light Firenza Bronze pull 128 mm C-C describes a cabinet handle with a 5-1/16 inch center-to-center hole spacing, which sets your drilling layout and keeps hardware alignment consistent from door to door. The overall 5-5/8 inch length gives you a little extra grip area beyond the screw centers, which helps when opening heavier cabinet doors or wider drawers. A 1-3/8 inch projection stands the handle off the face, creating comfortable finger clearance so doors can be pulled without scraping knuckles. The 11/16 inch width defines a slim front profile, which suits applications where a narrower pull better matches stile widths. The Light Firenza Bronze finish sets the visual tone, tying into other bronze details across a project. The Firenza collection identity keeps the style consistent wherever this pull is repeated in a room.
The 5-1/16 inch center-to-center dimension defines the exact distance between mounting holes, so hole locations on doors and drawers can be laid out or matched with repeatable accuracy. Because the overall length is 5-5/8 inch, there is a clear margin from the screws to each end, which affects where the pull sits relative to door edges and neighboring hardware. A 1-3/8 inch projection sets how far the pull extends into the room, which matters where doors swing past adjacent cabinets or walls. The 11/16 inch width controls how much flat surface the pull covers on the face, which can influence both appearance and position when working near panel reveals. The specified screw size of 8-32 x 1 inch defines the threaded interface, guiding hole sizing and thread engagement into the cabinet front.
This Schaub and Company Plain Handle from the Firenza collection is identified as a Light Firenza Bronze pull, which positions it as a decorative hardware choice for cabinets needing that specific finish tone. Its 5-1/16 inch center-to-center measurement matches installations laid out around that spacing, so it suits both new cabinet builds drilled for that pattern and replacements on fronts already using the same distance. The overall length of 5-5/8 inch works on many standard cabinet doors and drawers, because it spans enough surface to look substantial without extending excessively across narrower fronts. With an 11/16 inch width, the pull sits comfortably on typical stile and rail sizes, so it can be placed close to door edges while maintaining a balanced look. The zinc die cast material defines the base construction, which integrates with typical cabinet hardware assortments used on residential and light commercial casework.
The 5-1/16 inch center-to-center spacing on this 284-LFBZ Light Firenza Bronze pull means repeated drilling measurements stay constant from cabinet to cabinet, which supports consistent handle alignment across a full run of doors and drawers. The 1-3/8 inch projection sets a predictable stand-off from each front, which helps maintain the same finger clearance on every opening across a kitchen or bank of casework. An 11/16 inch width keeps the pull footprint defined, so measuring from door edges or panel reveals to the mounting centers is straightforward when laying out multiples. The 5-5/8 inch overall length establishes the visual span of the handle, which helps installers plan spacing between adjacent pulls on double doors or wide drawer fronts. The specified 8-32 x 1 inch screw size defines the fastener thread and length, which guides drilling and threading through typical cabinet door and drawer materials. Identifying the pull as part of the Classic Series provides a style grouping, which helps maintain a unified appearance when this model is repeated throughout a project.
The 284-LFBZ pull has a 5-1/16 inch center-to-center spacing, so hole locations are set at that distance for both new cabinet drilling and replacements using the same pattern.
This Schaub and Company Firenza pull has a 5-5/8 inch overall length, providing a grip area that extends beyond the mounting holes for comfortable use on doors and drawers.
The Light Firenza Bronze pull projects 1-3/8 inch from the cabinet face, giving finger clearance between the handle and door or drawer surface during normal operation.
The Schaub Plain Handle has an 11/16 inch width, creating a relatively slim front profile that suits typical cabinet rails and stiles without covering too much face area.
The Firenza collection pull is made from zinc die cast material, aligning it with common decorative cabinet hardware used on many residential and light commercial installations.
This cabinet pull is specified with 8-32 x 1 inch screws, so the threaded connection matches standard cabinet hardware practices for doors and drawer fronts.
The defined 5-1/16 inch center-to-center spacing, 5-5/8 inch overall length, and 1-3/8 inch projection give this Schaub and Company Firenza pull predictable dimensions for cabinet layouts. Pairing those measurements with the Light Firenza Bronze finish and zinc die cast construction lets you match both the look and the fit across doors and drawers that share the same drilling pattern.
Sold In: 1 Each