polished brass pull 3 c c describes a Schaub and Company Plain Handle from the Traditional Series that uses a 3 inch center to center spacing, so it fits layouts drilled for that common hole spread on cabinet doors and drawers. The pull is made from solid brass, giving the handle a dense feel that supports repeated daily use on frequently opened fronts. Its polished brass finish provides a bright, reflective surface that ties in with traditional or classic hardware suites using similar tones. The overall length of 3 3/8 inches leaves a slight margin beyond the 3 inch hole centers, which helps visually frame the mounting pattern on face frames or drawer fronts. A projection of 7/8 inch sets the gripping surface off the door or drawer face, allowing fingers to wrap around the pull without crowding the front during operation.
The 3 inch center to center measurement defines the distance between the two mounting points, so it directly governs where holes are bored in the cabinet door or drawer front for this pull. Because the overall length is 3 3/8 inches, the handle extends slightly beyond the mounting locations, which keeps the end posts close to the center span and helps the pull sit proportionally on standard drawer fronts. The 7/8 inch projection sets the handle away from the surface, so fingers can grip from below or above without scraping across the face during operation. The solid brass construction creates a single-piece metal body, supporting consistent alignment between the posts when the pull is tightened against the front.
This Schaub and Company Plain Handle is part of the Traditional Series, so its polished brass finish and simple shape align with classic cabinet styles in kitchens, baths, and built-ins that call for traditional decorative hardware. The 3 inch center to center layout matches a widely used boring dimension, which allows this solid brass cabinet pull to fit doors and drawers drilled on that spacing in face-frame or frameless casework. At 3 3/8 inches overall length, the pull remains compact, making it suited to narrower drawer fronts or door rails where a longer handle could crowd neighboring fronts. The projection of 7/8 inch works for cabinets where the user needs clearance for fingers without the handle standing excessively proud of the surface.
The defined 3 inch center to center value on this pull sets a fixed distance between the mounting points, so drilling jigs or line-boring equipment can be set to that spacing for consistent hole placement across a run of cabinets. Because the pull length is only 3 3/8 inches, the ends sit close to the mounting posts, which helps installers visually center the handle on narrower faces using tape marks or layout lines. The 7/8 inch projection keeps the gripping bar close enough to the front to limit snagging while still allowing fingers to pull comfortably, which helps doors open smoothly without knuckles contacting the surface. The solid brass material gives the handle a stable feel against the mounting surface when tightened to the front, supporting aligned rows of pulls on banks of drawers or upper doors.
This Schaub and Company Plain Handle uses a 3 inch center to center spacing, so the mounting holes on the cabinet front are drilled 3 inches apart.
The pull has an overall length of 3 3/8 inches, so it slightly overhangs the 3 inch mounting spread on each side of the posts.
The handle projects 7/8 inch from the door or drawer surface, providing space behind the pull for fingers to grip during opening.
The pull is made from solid brass with a polished brass finish, giving it a metal body and a bright reflective appearance on the cabinet front.
The 721-03 pull belongs to Schaub and Companys Traditional Series, aligning it with their classic style decorative hardware group.
With a 3 inch center to center and 3 3/8 inch overall length, the pull stays compact, fitting narrower drawer fronts or door rails.
This Schaub and Company Traditional Series Plain Handle pairs a solid brass body with a polished brass finish, so it suits projects calling for classic brass decorative hardware. The 3 inch center to center drilling and 3 3/8 inch overall length work well on cabinet doors and drawers already set up on that spacing. A 7/8 inch projection provides clearance for fingers while keeping the handle close to the surface. For cabinets using a 3 inch layout and a polished brass look, this pull offers a sized and finished option for those fronts.