polished chrome pull 4 c c describes a Schaub and Company solid brass handle designed for cabinet doors and drawers where a 4 inch center to center layout is already drilled. The pull is part of the Traditional Series, so it suits classic cabinet styles where simple, plain handles are preferred instead of decorative patterns. The material is solid brass with a polished chrome finish, giving the pull a bright look while the brass base provides a sturdy feel when opening heavier fronts. The overall length is 4-3/8 inches, which means the handle slightly overhangs the 4 inch screw spread for a balanced visual footprint on typical cabinet rails. A projection of 1-1/8 inches creates usable finger clearance from the front, helping hands comfortably grab the pull when installed on doors or drawer fronts.
The 4 inch center to center dimension means this pull aligns with pre-drilled cabinet holes spaced 4 inches apart, which is a common layout on many stock and custom fronts. With a 4-3/8 inch overall length, the handle extends beyond the mounting points, so installers can expect modest end reveal at each side of the screw centers. The 1-1/8 inch projection defines how far the gripping surface stands off the door or drawer face, giving enough clearance for fingers without pushing too far into the work area. The specified screw size is 8-32 x 1 inch, so the mounting interface is oriented around standard cabinet pull hole preparations that accept 8-32 threaded fasteners of that length.
This Schaub and Company Plain Handle with 4 inch center to center spacing fits cabinets laid out for a traditional, two-hole pull pattern in kitchens, baths, or furniture pieces. The Traditional Series designation lines it up with projects calling for classic rather than contemporary styling, so it suits face frame cabinets and framed fronts that echo traditional lines. Its polished chrome finish helps it visually coordinate with polished chrome hinges, faucets, and other room fittings, giving a unified hardware appearance. The 4-3/8 inch overall length works proportionally on standard drawer widths and cabinet doors, so runs of multiple fronts can share a consistent handle scale from base cabinets to uppers. Solid brass material means the handle brings a firm feel when pulling open doors or heavier drawers where a lightweight pull would feel less substantial. Because it is part of Schaub and Company decorative hardware, it fits into jobs that already specify this brand for other pulls and knobs, helping keep brand and finish continuity across an entire project.
The clearly defined 4 inch center to center layout allows installers or shop crews to drill repeatable holes across multiple fronts using a single jig setting. The 1-1/8 inch projection stays consistent from cabinet to cabinet, so once placement is established on one door or drawer, the hand clearance experience remains the same across the entire run. An overall length of 4-3/8 inches creates a predictable overhang past the screw centers, which helps align handles at equal distances from door and drawer edges in a layout. The specified screw thread of 8-32 coordinates with standard cabinet drilling practices, simplifying cross-compatibility with common insert or through-hole methods. The solid brass construction gives each pull a similar weight, so doors and drawers feel consistent when opened and closed on different parts of the installation. With a polished chrome finish named directly in the product description, projects can rely on the same finish tone every time this part number 732-26 is ordered for expansions or replacements.
This Schaub and Company Plain Handle is built for 4 inch center to center spacing, so it matches cabinets drilled with two mounting holes set 4 inches apart.
The handle length is 4-3/8 inches, so it extends slightly beyond the 4 inch mounting centers and provides a balanced look on typical cabinet doors and drawers.
The pull projection is 1-1/8 inches, which sets the gripping surface off the cabinet front enough for comfortable finger clearance when opening doors or drawers.
This 732-26 Traditional Series pull is made from solid brass, giving it a dense feel and supporting repeated use on frequently opened cabinet fronts.
The finish is polished chrome, so the pull has a bright, reflective surface that visually pairs with other polished chrome cabinet and room hardware.
The Schaub and Company Plain Handle 732-26 specifies 8-32 x 1 inch screws, matching standard cabinet pull threads for typical door and drawer installations.
This Schaub and Company Plain Handle centers 4 inch polished chrome pull gives a defined 4 inch center to center layout, a 4-3/8 inch overall length, and 1-1/8 inch projection. The Traditional Series styling, solid brass material, and polished chrome finish support consistent cabinet hardware appearance across doors and drawers, so projects using this 732-26 pull can match size, finish, and feel from one installation phase to the next.