Michelangelo bronze pull 6 C C describes a Schaub and Company solid brass handle from the Traditional Series finished in Michelangelo Bronze, so you get a classic look built on substantial material for cabinet doors or drawers. The 6 inch center to center drilling sets the mounting hole spread, which helps align this pull with layouts designed around that common size in cabinetry runs. Overall 6-3/8 inch length extends slightly past the drilling span, giving finger clearance at each end while keeping the footprint controlled on face frames or slab fronts. A 1-1/4 inch projection sets how far the pull stands off the surface, shaping grip comfort and the clearance your fingers have behind the handle during everyday use. The 737-MIBZ part number ties all of these details to a single identifiable pull for repeat orders and consistent hardware selection across a project.
The 6 inch center to center measurement defines the distance between mounting holes on this pull, which is critical when aligning it with pre-drilled cabinet fronts or when drilling new holes using standard 6 inch drilling jigs. By matching this 6 inch drilling, installers can keep hardware runs straight and consistent across multiple doors and drawers. The 1-1/4 inch projection sets how far the pull extends from the cabinet face, which influences both the hand clearance during use and how close the hardware sits relative to neighboring fronts or end panels. Combined with the 6-3/8 inch overall length, these measurements give a clear picture of how the pull will sit and perform once mounted on cabinetry.
The Schaub Plain Handle Centers 6 inch design places this pull in decorative cabinet hardware applications where a 6 inch center to center layout is desired on doors or drawers. Its Traditional Series designation connects it to classic styling, which suits projects calling for a more traditional cabinet hardware appearance in kitchens, baths, or built-ins. The Michelangelo Bronze finish positions the pull in settings that lean on warm bronze tones, allowing it to coordinate with other Michelangelo Bronze pieces carrying the same finish in a room. With an overall 6-3/8 inch length, the pull spans a moderate area on the cabinet face, making it suitable for both standard width doors and many drawer fronts where a balanced handle size is preferred.
The 6 inch center to center cabinet pull drilling provides a clear reference when laying out hardware patterns, which supports repeatable positioning across a bank of doors or drawers using drilling guides configured to that spacing. The 1-1/4 inch projection defines the stand-off, allowing planning around how the pull will be grasped and how it sits relative to adjacent cabinets, which helps maintain uniform ergonomics along a run. Solid brass construction stabilizes the form of the pull under repeated use, which matters on heavily used cabinet fronts where a firm, consistent handle profile supports long-term performance. The 737-MIBZ manufacturer part number ties these dimensions, finish, and material to one specific Traditional Series solid brass pull, simplifying reorders when matching hardware in future phases or replacement situations. The Michelangelo Bronze finish identification also aids in maintaining finish continuity wherever the same appearance is needed throughout the project.
The pull has a 6 inch center to center measurement, which sets the drilling distance between mounting holes and aligns with layouts designed around 6 inch cabinet hardware.
The pull length is 6-3/8 inch, so it extends slightly beyond the 6 inch drilling, helping provide finger room at the ends while keeping a controlled footprint on the cabinet face.
The projection is 1-1/4 inch, setting how far the handle stands off the door or drawer front and shaping finger clearance behind the pull during operation.
The 737-MIBZ pull is made from solid brass, giving the handle a substantial construction that supports a firm grip on cabinet doors or drawers.
The pull belongs to the Traditional Series collection, placing it among Schaubs classic hardware pieces for projects needing coordinated traditional cabinet pulls.
The finish is Michelangelo Bronze, defining the bronze tone and character so it can match other Michelangelo Bronze hardware used in the same space.
This Schaub and Company Plain Handle Centers 6 inch model in Michelangelo Bronze pairs a 6 inch center to center drilling with a 6-3/8 inch length, giving a clear fit profile for cabinet doors and drawers. Solid brass construction and a 1-1/4 inch projection set how the pull feels and functions in daily use. The Traditional Series and Michelangelo Bronze finish define the style group it belongs to, helping keep hardware appearance consistent across a project. For cabinets planned around 6 inch drilling, this 737-MIBZ pull provides a defined size, material, and finish combination ready to match those layouts.