Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
polished nickel cup pull describes a solid brass handle from the Traditional Series that works as a grip point on cabinet or furniture fronts, so doors and drawers can be opened with a consistent handhold across a run.
The Schaub and Company design uses a 3 inch center to center drilling, which lines the mounting holes on a fixed 76 mm spacing, so the pull matches common layouts already drilled on many cabinet faces.
The pull measures 3-13/16 inch in overall length, giving a wider visual footprint around the 3 inch centers, so the handle can visually balance both narrow and standard-width drawer fronts.
A 3/4 inch projection sets how far the pull stands off the surface, establishing finger clearance without pushing the grip excessively into the room, which supports smooth operation on doors close to adjacent faces.
The 1 inch width defines the vertical cup height, creating a compact profile that stays inside traditional framed fronts, so the hardware reads as a trim detail instead of dominating smaller rail sections.
The polished nickel finish brings a bright metallic surface over the solid brass base, which lets the pull visually tie into other polished nickel decorative hardware in a traditional setting.
This Schaub and Company cup pull uses a 3 inch center to center spacing, which positions the mounting points on a fixed pattern that can match existing 3 inch bores or guide new drilling during cabinet layout.
The pull length of 3-13/16 inch sets the metal span across the front, which helps installers visualize how the pull will sit between stiles or along drawer widths when planning spacing on a bank of fronts.
A projection of 3/4 inch defines how far the grip extends from the surface, which affects drawer clearance near adjacent appliances or walls while still allowing space for fingers under the cup edge.
The 1 inch width controls how tall the cup reads on the face, which helps it sit neatly on narrower rails or thinner drawer fronts where oversize hardware could crowd the frame members.
The 3 inch center to center cup pull format fits cabinet and furniture faces drilled on 76 mm spacing, which often appears on traditional kitchen, bath, or built-in casework where consistent handle spacing is desired.
The Traditional Series styling ties into classic hardware lines, which supports use on framed cabinetry and furniture pieces that lean toward period or heritage looks rather than ultra-minimal hardware choices.
With an overall length of 3-13/16 inch, the pull suits medium-width drawers or doors, which helps installers keep proportions correct when placing multiple pulls across stacked drawer banks.
The 1 inch width keeps the cup compact vertically, which is useful on narrower top rails or smaller furniture drawers where taller hardware could overlap trim or panel details.
The polished nickel cabinet hardware finish coordinates with polished nickel hinges, latches, or other fittings, which reinforces a continuous metallic tone across a room or built-in run.
Solid brass cabinet pull construction supports a uniform metal feel every time the handle is used, which matters on doors and drawers that see frequent traffic through kitchens, baths, or work areas.
The fixed 3 inch center to center dimension allows installers to rely on a single drilling pattern, which simplifies jigs or templates when multiple cup pulls are mounted across large projects.
Knowing the 3-13/16 inch length up front helps plan edge clearances and spacing between pulls, which reduces layout adjustments once faces are finished and ready for hardware.
The 3/4 inch projection value lets installers anticipate how far the pull extends past the face, which matters when doors open near adjacent cabinets, panels, or interior obstacles along a run.
The 1 inch width provides a predictable cup height, which makes it easier to align pulls with rail centers or panel reveals for straight visual lines across complex front designs.
The polished nickel finish over the Traditional Series form keeps the visual language consistent, which reduces the chance of mixing mismatched sheens or styles on a single bank of fronts.
The manufacturer part number 743-PN uniquely identifies this polished nickel model, which helps order the same pull again whenever additional cabinets or matching furniture pieces are added later.
The cup pull uses a 3 inch center to center spacing, which sets the hole distance at 76 mm for drilling or aligning with existing cabinet holes.
The 743-PN pull measures 3-13/16 inch in overall length, which defines how much of the drawer or door front the handle will visually span.
The cup pull has a 3/4 inch projection, which determines how far it extends from the cabinet surface for finger clearance behind the grip.
The pull has a 1 inch width, which sets the vertical size of the cup on the cabinet face and helps it fit narrower rails.
The cabinet pull is made from solid brass, which provides an all-metal body for a consistent feel when opening doors and drawers.
The 743-PN pull has a polished nickel finish, which offers a bright metallic look that coordinates with other polished nickel hardware.
The Traditional Series polished nickel cup pull from Schaub and Company pairs solid brass construction with a 3 inch center to center drilling, so it suits projects built around that spacing standard on cabinet or furniture fronts.
Dimensions of 3-13/16 inch length, 3/4 inch projection, and 1 inch width define its footprint, so layouts can be planned around those sizes when choosing hardware across doors and drawers.