Cast Bronze Twig Pull 12 c c describes a cast bronze cabinet handle from the Cast Bronze Mountain collection that uses a 12 inch center to center mounting spread, which helps align with drilling layouts designed around that common pull size. The handle uses cast bronze material, which provides a solid metal feel that supports confident gripping when opening or closing cabinet doors and drawers. An Antique Bronze finish is applied to the pull, which gives the metal a darker bronze tone that works well in cabinet layouts calling for a warm, traditional hardware color. The pull is identified by manufacturer part number 785-AZ, which ties directly to this specific size, finish, and style when matching other hardware pieces in the same project. Overall length is listed at 15-5/8 inches, which lets installers understand edge clearances and spacing on wider doors or drawer fronts.
The 12 inch center to center dimension defines the distance between mounting holes, which allows this pull to align with cabinet doors or drawers already drilled for that spread or to guide new drilling on fresh fronts. A projection of 2-1/8 inches describes how far the pull stands out from the cabinet face, which provides clearance for fingers behind the handle while operating doors or drawers. The 15-5/8 inch overall length gives a clear sense of how much linear space the handle occupies, which matters when placing it on wider fronts or when multiple pulls are used side by side. The noted 8-32 x 1 inch screw size specifies the machine thread and nominal length the pull is designed to work with, which supports predictable fastening into standard cabinet door and drawer material thicknesses.
This Schaub and Company pull belongs to the Cast Bronze Mountain collection, which positions it for projects that call for cast bronze hardware across multiple locations. The 12 inch center to center drilling dimension makes it suitable for cabinet layouts that use longer pulls on tall doors, pantry fronts, or wide drawers where extended grip area is preferred. With an overall length of 15-5/8 inches, the handle scales well on larger faces, which helps maintain proportion when doors or drawers are taller or wider than standard sizes. The Antique Bronze finish supports use in spaces where a darker bronze tone is desired, tying hardware into other Antique Bronze elements in the room.
The defined 12 inch center to center spacing provides a fixed drilling measurement, which supports repeatable hole placement when multiple doors and drawers are outfitted across a run of cabinets. A 2-1/8 inch projection sets the stand-off distance from the cabinet surface, which helps keep hand clearance consistent from one opening to the next. The listed 8-32 x 1 inch screw size specifies the threaded connection at each mounting point, which lets installers prepare for a familiar machine screw interface when assembling hardware on site. Knowing the overall 15-5/8 inch length ahead of time aids layout decisions, such as positioning the pull relative to panel edges or neighboring hardware, so that spacing lines up from cabinet to cabinet. The manufacturer part number 785-AZ clearly identifies this exact Antique Bronze, cast bronze twig design, which matters when matching replacements or adding more pulls later within the same project.
The 785-AZ twig pull uses cast bronze material, which gives the handle a solid metal construction that supports a substantial feel on cabinet doors and drawers.
This pull has a 12 inch center to center measurement, which sets the spacing between mounting holes for drilling and alignment on cabinet fronts.
The Cast Bronze Twig Pull has an overall length of 15-5/8 inches, which helps determine fit on wider doors or drawers and overall visual proportion.
The pull projects 2-1/8 inches from the cabinet face, which provides space for fingers behind the handle during regular door and drawer operation.
This Schaub and Company pull is specified with 8-32 x 1 inch screws, which defines the machine screw thread and nominal length for mounting.
The pull has an Antique Bronze finish, which sets its appearance to a darker bronze tone suitable for traditional or warm cabinet designs.
The Cast Bronze Twig Pull 12 c c from Schaub and Company provides a 12 inch center to center spread, which aligns with layouts calling for longer cabinet pulls across doors and drawers. Cast bronze construction and an Antique Bronze finish define both the material and color, which supports projects designed around substantial metal hardware and bronze-toned finishes. With 15-5/8 inch overall length and 2-1/8 inch projection, the pull supplies clear sizing for layout planning on wider or taller cabinet fronts. When a project needs coordinated cast bronze hardware from the Cast Bronze Mountain collection, this 785-AZ pull gives a defined option for runs that use a 12 inch center distance.