
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Formica 2178-99 brushed stainless steel metal laminate gives project surfaces a brushed stainless steel sheet look in a 48x96 inch format, so fabricators can cover larger areas with a consistent metal appearance. This laminate is part of Formica Corporation's DecoMetal metal laminate line, tying directly into established fabrication practices for that family. The sheet uses a brushed stainless steel or corrugated aluminum face bonded to a phenolic back, so the decorative metal side presents the visual finish while the phenolic layer supports it during fabrication. Grade 84 construction at .030 inch, or 0.8 mm, thickness provides a substantial laminate profile that suits typical laminate handling tools and methods. The phenolic back prevents creasing during handling and forming, keeping the brushed surface profile intact for visible installations. That same backer also allows improved adhesion to suitable substrates, which supports a stable bond in finished millwork, fixtures, and panels.
This Formica brushed stainless steel laminate is recommended for vertical and light duty horizontal applications, so it aligns well with wall panels, cabinet fronts, and similar surfaces that experience light contact. The 48x96 inch sheet format streamlines layout on those runs, allowing tall or wide sections to be covered with single pieces where dimensions allow. With Grade 84 laminate thickness of .030 inch, or 0.8 mm, installers can work the material with established laminate fabrication techniques, supporting predictable trimming and edge treatment. The phenolic back improves adhesion to appropriate substrates, so once bonded, panels are designed to stay flat and secure in everyday use. Because the back also prevents creasing, fabricators can move and stage sheets between cutting stations while preserving the visual quality of the brushed stainless steel face.
This Formica 2178-99 brushed stainless steel metal laminate is recommended for vertical and light duty horizontal applications, directing it toward wall cladding, cabinet faces, display fixtures, and similar surfaces. In these roles, the brushed stainless steel sheet or corrugated aluminum face provides a metal look while the phenolic back supports the structure of the laminate. The 48x96 inch size helps cover tall wall panels or multiple cabinet components from a single sheet, which benefits layout planning and can reduce joint lines on visible surfaces. Grade 84, .030 inch (0.8 mm) thickness contributes enough body to feel substantial on doors and panels while staying thin enough for standard laminate edge and corner details. Because the phenolic layer prevents creasing, it supports handling and positioning of full sheets across these vertical surfaces without distorting the decorative metal finish.
The DecoMetal metal laminate construction uses a phenolic back specifically to prevent creasing of the metal face, which protects the brushed stainless pattern as sheets move through the shop and during installation. That same phenolic back improves adhesion to substrates, which supports a continuous bond line that helps panels stay tight and avoid telegraphing movement in everyday conditions. Grade 84, .030 inch (0.8 mm) thickness gives fabricators a predictable laminate profile that works with common tools and methods, supporting consistent edge quality from part to part. The 48x96 inch format offers repeatable panel yields, so once a cutting pattern is established, multiple identical components can be produced from successive sheets. With its recommendation for vertical and light duty horizontal use, the product parameters guide designers and fabricators toward applications where the laminate's structure and face finish are aligned with expected service demands.
This DecoMetal metal laminate uses a brushed stainless steel sheet or corrugated aluminum face bonded to a phenolic back, so the decorative metal side is supported by a stable laminate core.
The phenolic back prevents creasing and improves adhesion to substrates, helping the metal face stay smooth while supporting a strong bond in finished panels and fixtures.
The laminate is recommended for vertical and light duty horizontal applications, directing it to wall panels, cabinet fronts, and similar surfaces subject to modest wear.
The product is supplied as a 48x96 inch metal laminate sheet, which helps cover larger wall or cabinet areas with fewer seams and layout joints.
This Grade 84 DecoMetal laminate is .030 inch, or 0.8 mm, thick, giving a substantial yet workable profile for common laminate fabrication methods.
Manufacturer part number M21788499408000 identifies this specific Formica 2178-99 brushed stainless steel Grade 84, .030 inch, 48x96 inch DecoMetal laminate sheet.
Formica 2178-99 brushed stainless steel metal laminate pairs a DecoMetal face with a phenolic back, giving fabricators metal appearance with laminate handling characteristics. The 48x96 inch, Grade 84, .030 inch (0.8 mm) format supports practical cutting layouts for cabinets, fixtures, and wall panels. With its recommendation for vertical and light duty horizontal applications and its adhesion-focused phenolic core, this sheet aligns with many decorative and light-use surface needs. Wurth Baer Supply offers this Formica Corporation laminate so shops can integrate a consistent brushed stainless look into their next installation.
Sold In: 1 Sheet