Cover Capfor Dowel Socket

20mm Cover Cap For Socket For Clean Finishing

20mm cover cap for socket is a simple finishing part that snaps over compatible dowel sockets in leg levellers and toe kick applications, so exposed sockets on work surfaces and tables present a clean, finished look. The cover cap for dowel socket design targets cabinet and furniture levelers, where open sockets can otherwise remain visible after height adjustment. Made by Hardware Concepts, Inc., this cap sits in the Work Surface & Tables and Cabinet/Furniture Levelers category, so it fits into common shop layouts using adjustable legs. The 25/32 inch diameter sizing means the cap is sized for typical 20mm dowel sockets used in many leveling systems, helping the socket area visually blend with surrounding material once the leg height is set. A black finish version allows a dark, uniform appearance around the socket location.

Practical Details That Support Socket Finishing

• The 25/32 inch diameter size ties directly to standard 20mm dowel sockets used with many leg levellers and toe kicks, so the cap can cover the socket opening and help visually align with common leveling hardware layouts.
• Placement in the Work Surface & Tables category connects this part to table and bench applications, so installers can use it where adjustable legs leave sockets visible on finished work surfaces that need a neater appearance.
• Listing under Cabinet/Furniture Levelers shows the cap is intended for furniture-leveling assemblies, so covering the socket helps the underside of cabinets or toe kick areas look more uniform after leg adjustments are complete.
• Being part of the Leg Levellers and Toe kicks product class links this cap to height-adjustable cabinet bases, so it can visually close off the dowel socket used to mount or guide leveling components in those assemblies.
• The black finish option means the visible face of the cap presents a dark tone at the socket, which can coordinate with darker toe kicks or undercabinet areas where a low-contrast look is often preferred.

Cover Cap Fit Around Dowel Socket Areas

The 20mm dimension in the SAP description connects this cap directly to dowel socket sizing, so the fit relationship centers on typical 20mm socket hardware in leveling systems. The 25/32 inch diameter figure describes the overall span of the cap, so it can extend slightly past the socket edge and visually mask the transition between socket and surrounding material. Because the part is defined as a cover cap for dowel sockets within cabinet and furniture levelers, its role is focused on finishing the exposed socket zone after height setting, keeping that area more visually unified on work surfaces, tables, and toe kick lines.

Using This Cover Cap In Leveler Assemblies

Where This Cover Cap For Dowel Socket Fits

The product name, Cover Capfor Dowel Socket, identifies the primary use point at the dowel socket in leveling hardware, so it targets the connection area used by cabinet and furniture levelers. Placement under Work Surface & Tables indicates it suits benches and tables that rely on adjustable leg systems, where sockets sit in the underside or frame and remain visible unless covered. Its presence in the Leg Levellers and Toe kicks product class ties it to base cabinet structures, so the cap can sit at the socket openings in toe kick or bottom panel areas and support a tidier run along the cabinet base. In cabinet/furniture levelers, these sockets often cluster near corners; using a cap that matches the socket dimension helps maintain a more consistent look across those points.

Why Socket Size And Finish Matter For Results

The 20mm reference and the 25/32 inch diameter description give a clear relationship between socket and cap size, so the coverage focuses on matching typical dowel sockets rather than a generic opening. When the cover spans just beyond the socket edge, it helps hide minor irregularities around the drilled or formed socket, which can matter on visible work surface undersides or open-to-view furniture bases. The black finish is significant in darker installations because it visually recedes in shadowed areas beneath cabinets, tables, or work surfaces, making the leveling hardware presence less apparent once legs are set. Identifying the product with manufacturer part number 5720-014 also matters in repeat work, because using the same part number across projects supports consistent appearance of all covered sockets within a line of cabinets or tables.

Questions About This Dowel Socket Cover Cap

Select This Cover Cap For Matching Sockets

The 20mm cover cap for socket from Hardware Concepts, Inc., with its 25/32 inch diameter and black finish, is defined for dowel sockets in cabinet and furniture levelers. For work surfaces, tables, and leg levellers in the Work Surface & Tables and Cabinet/Furniture Levelers categories, this cap keeps dowel socket points visually consistent across bases and toe kicks. Choosing the 5720-014 part number aligns the socket coverage with the same established dimensions and finish wherever these leveling components are used.