Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Adhesive roller frame is designed for spreading contact cement during plastic laminate installation work, so the frame supports even adhesive coverage across the substrate before laminate is set. The Gundlach Company 3-F designation identifies this frame as part of a professional-grade tool system used in laminate shops and on site. Sturdy frames resist bending from normal application pressure, so the roller tracks straight when you lean on it to push contact cement into the surface. Because the frame is threaded to accept the Nos. 0162 and 2027 handles, installers can match it with existing threaded handles from Gundlach for extended reach or bench work. All metal parts are plated, giving the frame a corrosion-resistant surface that stands up to adhesive exposure and typical shop environments over repeated projects.
The Gundlach Company 3-F adhesive roller frame is used with specific roller covers and threaded handles, so each component locks into a known system. Use PC3-F with the No. 33-C 3 inch Roller Cover (PC33-C), which matches this frame configuration for narrower laminate runs, such as edges or small panels. Use PC7-F with the No. 77-C 7 inch Roller Cover (PC77-C), pairing the frame with a wider cover when rolling broad countertop or panel areas. The frame is threaded to accept the Nos. 0162 and 2027 handles, so the connection between frame and handle is mechanical and secure under normal rolling pressure. All metal parts are plated, which supports repeated attachment and removal of roller covers and handles without the mating areas degrading quickly from corrosion.
The Gundlach Company 3-F adhesive roller frame is intended for spreading contact cement for plastic laminate installation work, placing it squarely in countertop, casework, and panel fabrication workflows that rely on contact adhesive for bonding. When installers are laminating cabinet sides, tops, or fixture panels, this frame works as the support for either a 3 inch or 7 inch roller cover, depending on project layout. Use PC3-F with the No. 33-C 3 inch Roller Cover (PC33-C) for tight spaces, narrow strips of laminate, or detailed sections where a compact roller path helps avoid overlap. Use PC7-F with the No. 77-C 7 inch Roller Cover (PC77-C) when covering broad surfaces, letting a wider roller lay down contact cement across panels in fewer passes. Because the frame is threaded to accept Nos. 0162 and 2027 handles, it fits into handle setups already common in many laminate shops.
The sturdy frames resist bending from normal application pressure, so when installers push down to drive contact cement into porous substrates, the roller stays true instead of flexing away from the surface. That stability helps maintain a consistent adhesive film, which is critical before laying laminate. All metal parts are plated, so the working surfaces of the frame are protected against corrosion that can occur when tools are repeatedly exposed to contact cement, solvents, or humid shop conditions. The threaded connection to the Nos. 0162 and 2027 handles creates a solid joint that helps the roller track predictably during long passes across a countertop or wall panel. Using PC3-F with the No. 33-C 3 inch Roller Cover (PC33-C) and PC7-F with the No. 77-C 7 inch Roller Cover (PC77-C) ties the frame to matched covers, supporting repeatable coverage patterns that installers can rely on from job to job.
The 3-F adhesive roller frame is for spreading contact cement for plastic laminate installation work, so it serves as the core tool when applying adhesive before bonding laminate sheets.
The 3-F frame is used as PC3-F with the No. 33-C 3 inch Roller Cover (PC33-C) and as PC7-F with the No. 77-C 7 inch Roller Cover (PC77-C), supporting narrow and wide coverage.
The 3-F adhesive roller frame is threaded to accept the Nos. 0162 and 2027 handles, creating a mechanical connection that holds under normal rolling pressure during contact cement application.
The 3-F frame uses plated metal parts, giving the tool a protective surface that resists corrosion and helps it withstand repeated contact with adhesive and shop conditions.
The 3-F adhesive roller frame resists bending from normal application pressure, helping the roller stay aligned and spread contact cement in an even, predictable film.
The 3-F frame can work with a 3 inch or 7 inch roller cover, so installers can use the narrower size for tight areas and the wider size for larger laminate fields.
The Gundlach Company 3-F adhesive roller frame is built for spreading contact cement in plastic laminate installation, so it fits directly into laminate shop and field workflows. Its sturdy frame resists bending from normal application pressure, supporting even adhesive coverage before laminate is set. Threaded connections for Nos. 0162 and 2027 handles link the frame into familiar handle systems already used by many installers. All metal parts are plated, giving the frame a protective surface that handles repeated contact cement exposure. By matching this frame with the specified 3 inch or 7 inch roller covers, installers can set up a dependable adhesive rolling system sized to their laminate work.
Sold In: 1 Each