CRESENDO W/BACKER Chemetal MK44048WB is a Chemetal laminate designed for decorative surfacing where a metal look is required on panels, fixtures, or cabinetry. The SAP description 440G 96X48X.055 W/BACK CRESCENDO ALUM identifies this sheet as a Crescendo aluminum design in a 96 inch by 48 inch format, giving installers a full-size panel to work with on larger runs. The .055 thickness in that description defines a laminate thickness suited to typical laminate fabrication workflows, so fabricators can cut, bond, and trim it using established laminate techniques. The Chemetal HPL category places this product in a high-pressure laminate class, which supports use in standard laminate layouts alongside other surfacing materials. The backer referenced in the name helps provide a balanced construction during bonding, which matters when building flat, stable assemblies over appropriate cores.
The 96 inch by 48 inch format of CRESENDO W/BACKER Chemetal MK44048WB lets installers plan layouts to minimize seams on many vertical applications, which can reduce layout complexity on large faces. The .055 thickness described in 440G 96X48X.055 W/BACK CRESCENDO ALUM keeps this sheet within a common laminate gauge, so fabricators can set tooling, trim depths, and edge buildup details using familiar laminate parameters. Being in the Chemetal HPL category and laminate product class, this sheet is suited to workflows that treat it as a high-pressure laminate during bonding to appropriate substrates. The backer reference in the product name supports a balanced construction approach, which helps maintain panel flatness when building assemblies that pair this decorative Crescendo aluminum face with a backing layer on the opposite side where required by the design.
The Crescendo aluminum designation in the SAP description 440G 96X48X.055 W/BACK CRESCENDO ALUM points this Chemetal laminate toward applications needing a metal-look surface on panels, fixtures, or cabinetry faces. The 96 inch by 48 inch sheet size gives fabricators a span suited to full-height cabinet ends, wall panels, or longer fixture sections, which helps when continuous visual runs are important. As part of the Chemetal HPL category, this laminate aligns with projects that rely on high-pressure laminate materials for decorative surfacing over sheet substrates. The laminate product class confirms its role as a surfacing layer rather than a structural panel, focusing its use on bonded surface applications. The backer reference in the name supports use in panel constructions that benefit from balanced layering, which is significant when building components where surface stability and flatness matter to the finished installation.
The .055 thickness called out in 440G 96X48X.055 W/BACK CRESCENDO ALUM gives shops a defined gauge, helping set up saws, routers, and edge tooling for predictable trimming and flush detailing from job to job. Working with a known thickness also supports consistent reveals where this Crescendo aluminum surface meets adjacent materials in a run of cabinets or panels. The 96 inch by 48 inch dimension allows fabricators to standardize cutting diagrams, improving yield calculations when multiple panels share the same Chemetal MK44048WB finish. The Chemetal HPL classification lets installers align bonding and handling steps with their existing high-pressure laminate routines, which can streamline workflows when this sheet is specified alongside other laminates. The C440G007 manufacturer part number ties all these details to a single, repeatable product, aiding accurate specification so replacements or follow-on orders match the original visual and dimensional setup.
The CRESENDO W/BACKER Chemetal MK44048WB sheet is identified in the SAP description as 96 inch by 48 inch, giving installers a full-size laminate panel for larger faces and tall cabinet or panel applications.
The Chemetal CRESENDO aluminum laminate is described as .055 thickness in 440G 96X48X.055 W/BACK CRESCENDO ALUM, providing a defined laminate gauge that supports predictable trimming and edge detailing in fabrication.
The C440G007 manufacturer part number refers to this specific Chemetal laminate sheet, helping shops specify and reorder the same Crescendo aluminum design with the same size and thickness characteristics.
The Chemetal MK44048WB product is in the Chemetal HPL category and laminate product class, placing it among high-pressure laminate surfacing materials used over suitable sheet substrates.
The CRESENDO aluminum reference in 440G 96X48X.055 W/BACK CRESCENDO ALUM indicates an aluminum-look Chemetal surface, providing a metallic visual for decorative laminate applications.
The backer reference in CRESENDO W/BACKER signals a construction that supports balanced panel builds, which is important when assembling flat decorative components over appropriate core materials.
CRESENDO W/BACKER Chemetal MK44048WB combines a Crescendo aluminum surface with a 96 inch by 48 inch sheet size and .055 thickness, giving shops a defined laminate format for metal-look projects. The Chemetal HPL classification and laminate product class align it with standard high-pressure laminate surfacing workflows. Using the C440G007 part number keeps future orders tied to the same Crescendo aluminum appearance and dimensions, supporting continuity when projects repeat or expand.
Sold In: 1 Sheet