Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Spray Grade Contact Adhesive Flammable describes a contact adhesive designed to be applied by spray, which helps installers cover broad surfaces quickly during panel, laminate, or similar bond-up work. The product is a contact adhesive in the Formica Adhesives line, so it is suited to tasks where two surfaces are coated, flashed off, and then bonded on contact. The 5 gallon size supports extended production runs or multiple installs from a single container, which reduces changeover time on larger projects. The adhesive is identified as spray grade and flammable, so it is prepared for spray equipment setups that are configured for flammable materials. The adhesive is described as having excellent room temperature contactability, which supports bonding at typical shop or jobsite temperatures without additional heating steps. It also features green strength and high initial tack, which means that once the pieces touch during assembly, the bond develops quickly to hold components in place under normal handling.
The adhesive has an open time of 30 minutes, so once it is applied and flashed off correctly, the two coated surfaces can be brought together within that window to achieve proper contact bonding. This 30 minute open time provides flexibility during layout and positioning on larger panels or multiple parts, reducing rush during assembly. The dry time is stated as 5 minutes based on conditions, so under typical shop or jobsite environments the adhesive reaches a ready-to-bond state relatively quickly. That 5 minute dry time supports efficient production flow because parts can move from spraying to assembly in short cycles. Together, the stated open time and dry time help installers plan spraying, staging, and bonding steps so parts reach the press or final position in a predictable sequence.
This product is a contact adhesive within the Adhesives and Caulks category, specifically listed as a bulk contact adhesive, so it is positioned for shop or field work where larger volumes are required. The description notes excellent room temperature contactability, which means typical indoor ambient conditions are suitable for forming the bond once both surfaces have been coated and allowed to dry. Green strength and high initial tack are highlighted, so when the parts are brought together, the bond grips rapidly to support normal handling or movement off the bench. The adhesive is identified in the SAP description as a low VOC flammable spray adhesive, tying it to jobs needing both spray delivery and compliance with low VOC thresholds.
Excellent sprayability is emphasized, meaning the adhesive is formulated to atomize and flow through spray equipment in a way that helps deliver an even film across the substrate. That consistency supports uniform bond strength across the sheet, which is important when laminating or bonding large, visible areas. The premium 36% solids level means a greater portion of each applied coat remains as a bonding layer after solvent flash-off, contributing to a dependable glue line when applied correctly. The Green Guard certification and Green Diamond compliance show that the adhesive meets defined environmental criteria, which can support projects where indoor air considerations and green-focused specifications are part of the job requirements. California OTC and VOC compliance is also stated, aligning this adhesive with installations performed in regions that require products to meet specific VOC limits during normal use. The identification as non ozone depleting provides another environmental advantage for operations that prefer materials without ozone-harming components in their adhesive lineup.
Spray Grade Contact Adhesive Flammable, Premium 36% Solids - Red is a Formica Adhesives contact adhesive, so it is intended for contact bonding workflows where both surfaces are coated and bonded on contact.
The adhesive open time of 30 minutes gives a window after drying in which both coated surfaces can be joined, allowing layout and alignment steps without rushing assembly.
The premium 36% solids content means more of the sprayed film becomes the final bond line, supporting strong contact adhesion at the recommended film build once solvents have evaporated.
The Green Guard certification and Green Diamond compliance indicate that the adhesive meets defined environmental and indoor air quality criteria, which matters on projects with green or health-focused specifications.
California OTC and VOC compliant means this low VOC spray contact adhesive is formulated to align with regional air-quality regulations, supporting work performed in regulated environments.
The stated green strength and high initial tack let parts hold together firmly as soon as they touch during bonding, which supports handling, trimming, or moving assemblies shortly after contact.
This contact adhesive from Formica Adhesives is identified as a low VOC flammable spray adhesive with premium 36% solids, so it fits work that needs spray application, substantial solids build, and attention to VOC levels. The combination of excellent sprayability, 5 minute dry time based on conditions, and 30 minute open time supports efficient production, from spraying through assembly. Green Guard certification, Green Diamond compliance, and California OTC and VOC compliance position this product for projects where environmental criteria are part of the scope. For installers and shops planning bulk contact adhesive usage, the 5 gallon format and these performance characteristics make this product a practical choice when specifying a spray-grade contact adhesive.
Sold In: 1 Each
