Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Plastofix Elite Chemcraft FN4213740-5G is a high quality, acid curing RAC clear topcoat designed as a fast building product with a 35 percent volume solids content, so each coat lays down a substantial film for fewer passes on interior wood projects. This Chemcraft topcoat offers very good light stability based on the choice of resin used in the product, helping finished kitchen cabinets and furniture maintain appearance under typical indoor light exposure. The product is positioned in the clear topcoats class, so it serves as the final protective and aesthetic layer over properly prepared interior wood surfaces. Plastofix Elite is recommended for kitchen cabinets, high build office or residential furniture, as well as other interior wood applications, aligning the resin system and cure profile with common shop work. The product must be catalyzed prior to use, adding the necessary component so the acid curing system can reach its designed film performance.
This high quality, acid curing RAC clear topcoat is structured as a fast building product due to its 35 percent volume solids, so each spray pass contributes significantly to film thickness on interior wood. Depending on the spray equipment being used, it may be ready to spray at 20 seconds viscosity Zahn number 2, giving finishers a defined viscosity reference when adjusting material preparation for cabinets or furniture. The requirement that the product must be catalyzed prior to use establishes that a catalyst addition is part of the application sequence so the acid curing mechanism functions correctly during film formation. Because the product meets KCMA standards and is recommended for kitchen cabinets, high build office or residential furniture, and other interior wood applications, its cure profile and spray behavior are aligned with common production environments focused on those uses.
This Chemcraft Plastofix Elite topcoat is classified under clear topcoats and is recommended for kitchen cabinets, placing it within finishing systems used on cabinet doors, face frames, and exposed casework in interior spaces. The same product is recommended for high build office or residential furniture, so it addresses desks, tables, and casegoods where an even film and controlled sheen are important. The description also notes use on other interior wood applications, extending its role to additional interior millwork or wood components where an acid curing RAC finish is desired. Because the product meets KCMA standards, it aligns particularly well with interior kitchen cabinet environments that are evaluated against those criteria, tying its use to cabinet and related furniture work in shops that follow those performance targets.
The 35 percent volume solids level defines Plastofix Elite as a fast building product, so each coat adds meaningful film thickness on cabinets and furniture, supporting high build results without excessive passes. As an acid curing RAC system, the product relies on catalyzation prior to use so the chemical reaction can develop the intended film properties after spraying and drying on interior wood. The resin choice in the product delivers very good light stability, which helps finished kitchen and furniture surfaces maintain appearance when exposed to typical indoor lighting over time. Meeting KCMA standards connects the performance of this clear topcoat with established expectations for kitchen cabinet finishes in interior use. The reference to possible readiness to spray at 20 seconds viscosity Zahn number 2, depending on spray equipment being used, gives finishers a viscosity target that supports consistent atomization and film build during cabinet and furniture finishing.
Plastofix Elite Chemcraft FN4213740-5G is a high quality, acid curing RAC clear topcoat with 35 percent volume solids, so it functions as the final film-building layer on interior wood projects.
This Plastofix Elite clear topcoat is recommended for kitchen cabinets, high build office or residential furniture, and other interior wood applications, aligning it with typical cabinet and furniture shop work.
The 35 percent volume solids content makes this topcoat a fast building product, so each coat adds substantial film thickness on cabinets and furniture, supporting high build results on interior wood.
This Chemcraft topcoat must be catalyzed prior to use, because the acid curing RAC system relies on catalyst addition for the coating to reach its intended film performance on interior wood.
The description states that, depending on the spray equipment being used, the product may be ready to spray at 20 seconds viscosity Zahn number 2, providing a viscosity reference for setup.
Meeting KCMA standards places this clear topcoat within finish systems that align with recognized kitchen cabinet performance criteria, supporting its use on cabinets and related interior wood projects.
Plastofix Elite Chemcraft FN4213740-5G offers a high quality, acid curing RAC clear topcoat with 35 percent volume solids, very good light stability, and KCMA standards compliance, supporting kitchen cabinets, high build office or residential furniture, and other interior wood applications that call for a fast building clear finish.
Sold In: 1 Gallon
