
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
591 magnetic catch by EPCO is a light pull force magnetic catch that holds doors or panels with controlled resistance, which matters when you want parts to stay closed yet open easily without stressing hinges or hardware. The catch uses a drive in magnet casing, so the housing presses into a pre-drilled hole, helping maintain a clean surface and reducing layout steps on cabinet or fixture jobs. The magnet housing measures 5/8 inch in diameter and 3/4 inch deep, giving you a compact form that fits small frames or stile edges while still providing usable holding strength. A 3/4 inch diameter strike plate pairs with the magnet face, creating a predictable contact area that supports repeatable alignment from piece to piece in the shop or onsite.
The drive in magnet casing on the EPCO 591 magnetic catch seats in a drilled 5/8 inch diameter hole, so layout revolves around a standard round bore instead of surface mounting, which can simplify jigs and speed repetitive cabinet runs. With a 3/4 inch deep housing, the bore depth is well defined, helping you stop at a practical depth that holds the body securely without breaking through a stile or thin panel. The 3/4 inch diameter strike plate gives you a clear target when positioning on the mating door or frame, supporting accurate alignment so the magnet face meets flat and delivers consistent pull. The light pull force rating supports doors that need positive closure without excessive slam force.
The EPCO 591-P magnetic catch is described as a light pull force magnetic catch, which suits small cabinet doors, utility panels, or light doors that benefit from gentle holding rather than strong retention. Its 5/8 inch diameter magnet housing allows use on narrow face frames or thin rails where wider hardware would crowd the edge, helping preserve material around the bore. Because the housing is 3/4 inch deep, it can be recessed into stiles or cabinet sides without projecting into the interior more than necessary, which matters when shelf clearance is tight. The 3/4 inch diameter strike plate offers a broad enough surface to catch minor alignment variation while still fitting compact door corners or small frames.
The drive in magnet casing on this aluminum magnetic catch creates a fixed position in the drilled hole, which supports repeatable alignment from cabinet to cabinet when your bore depth and location are consistent. The 5/8 inch diameter x 3/4 inch deep housing geometry makes it practical to standardize on one drill size and depth stop, reducing setup changes between pieces. Pairing that housing with a 3/4 inch diameter strike plate means the contact area is easy to visualize during layout, helping doors pull to a predictable point instead of wandering. The specified light pull force means the magnetic engagement is oriented toward ease of opening, which can help reduce wear on small hinges since less force is transferred through the hardware during operation.
The EPCO 591-P is a light pull force magnetic catch, so it uses a magnet and strike plate to hold doors or panels closed with moderate resistance.
The 591 magnetic catch uses a drive in magnet casing, meaning the magnet housing presses into a drilled hole for a flush, concealed mounting point.
The magnet housing is 5/8 inch in diameter, so it is sized for a 5/8 inch bore, which simplifies choosing the correct drill bit in the shop.
The magnet housing is 3/4 inch deep, so a 3/4 inch deep bore seats the housing fully and supports stable positioning in the material.
The 591 magnetic catch uses a 3/4 inch diameter strike plate, giving a defined contact area that helps with consistent alignment on doors or frames.
The EPCO 591 magnetic catch has a pull force of 6.5 lb, providing light holding suited to small doors that need easy opening.
The EPCO 591 magnetic catch, with its 5/8 inch diameter by 3/4 inch deep drive in magnet housing and 3/4 inch diameter strike plate, delivers a defined 6.5 lb light pull force that fits small cabinet or panel applications. Those dimensions support straightforward drilling setups and predictable engagement points, which helps maintain consistent door action across a run of work. Select this 591-P magnetic catch when a compact, aluminum, light pull solution aligns with your layout and holding needs on cabinets, fixtures, or utility enclosures.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 500 Each | EP591WS Mfr# 591-WS | 591 Magnetic Catch, Aluminum 250/Box |