Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO 591 magnetic catch gives a light pull force closure that holds doors or panels just firmly enough for everyday cabinet use without fighting the opening stroke on smaller doors. Magnets that rotate within the casing maintain consistent contact to the strike plate, so the holding force stays even as doors flex slightly in normal use. The aluminum magnet housing measures 47/64 inch high by 3/4 inch deep by 2-1/16 inch long, creating a compact body that fits comfortably on narrow cabinet rails or face frames. The strike plate size of 13/16 inch high by 1-1/8 inch long provides enough landing area for dependable alignment while keeping a low profile on the mating surface. As a light pull force magnetic catch, this part suits doors or panels where a positive close is needed without stressing smaller hinges.
The magnetic catch housing size of 47/64 inch high by 3/4 inch deep by 2-1/16 inch long sets the footprint for positioning on a cabinet frame or carcass member. The strike plate at 13/16 inch high by 1-1/8 inch long defines the area that must align with the magnet face for proper pull. All necessary screws described for this magnetic catch support direct fastening of both housing and strike to typical cabinet substrates, reducing layout time because the fastening method is already matched to the parts. The light pull force rating means installers can plan hinge selection and door overlay knowing the catch will add modest closing resistance rather than a heavy load.
This magnetic catch described as light pull force matches situations where doors or panels need gentle retention, such as smaller cabinets or light doors that should stay shut without a strong snap. The compact housing, at 47/64 inch high by 3/4 inch deep by 2-1/16 inch long, fits along narrow rails, stiles, or interior webs where space between edges and hinges is tight. The 13/16 inch high by 1-1/8 inch long strike plate pairs with the rotating magnets to give a usable contact area even when the door closes with slight misalignment, which suits everyday cabinet layouts. As a magnetic catch within the Locks and Latches category, it plays the role of the final holding device after hinges have carried the swing.
Magnets that rotate within the EPCO 591 casing work to maintain maximum contact with the strike plate, which helps keep the closing feel consistent over time despite minor door movement. The aluminum magnet housing creates a stable platform for that rotating action, supporting predictable alignment between magnet and strike whenever the door is shut. The defined dimensions of both housing and strike - 47/64 inch by 3/4 inch by 2-1/16 inch for the housing and 13/16 inch by 1-1/8 inch for the strike - give installers clear layout references for drilling and positioning, reducing trial-and-error during fit-up. The light pull force description signals that the magnetic catch will assist closure without adding significant load to hinges, which helps cabinets operate smoothly when used repeatedly through the day. The EPCO 591-WS part number ties these performance characteristics to a single, repeatable component choice on drawings and material lists.
The EPCO 591 magnetic catch is described as light pull force, which holds doors closed for everyday use while keeping opening effort modest for users.
The EPCO 591 magnets rotate within the casing to maintain maximum contact to the strike, supporting a consistent hold even if the door closes slightly off angle.
The EPCO 591 magnet housing measures 47/64 inch high by 3/4 inch deep by 2-1/16 inch long, giving a compact footprint for cabinet installations.
The strike plate for the EPCO 591 magnetic catch measures 13/16 inch high by 1-1/8 inch long, providing a defined contact surface for the rotating magnet.
The EPCO 591 magnet housing is aluminum, giving a rigid body that supports stable magnet positioning on cabinet frames or panels.
The EPCO 591 magnetic catch is supplied with all necessary screws, so both housing and strike plate fasten directly using the provided screw set.
The EPCO 591-WS magnetic catch pairs a light pull force with rotating magnets and a compact aluminum housing, giving cabinet builders a defined solution when a gentle but positive closure is needed. The specified housing and strike plate dimensions translate directly into layout measurements on rails, stiles, or interior dividers, which simplifies planning and repeat work. For projects that call for a light duty magnetic catch with a known footprint and part number, this EPCO magnetic catch offers a clearly described option ready to drop into shop standards.
Sold In: 500 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  EP591B Mfr# 591-P | 591 Magnetic Catch, Aluminum Polybag |