SP-256 Strike Plate, Black

SP-256 Strike Plate Black For Deadbolt Locks

SP-256 strike plate black is a CompX Timberline Lock strike designed for use with deadbolt locks, so it provides the mating surface the deadbolt needs to secure the door or panel in the locked position. The Z shape strike plate with 1/2 dp configuration creates a formed offset, which positions the deadbolt engagement point away from the mounting surface to match locks designed for this geometry. The black finish on this strike plate visually matches black hardware setups, helping maintain a consistent appearance on cabinets or enclosures using CompX Timberline Lock components. Identified as manufacturer part SP-256-3, this strike plate gives installers a precise reference when matching lock bodies, which helps reduce mismatches between strikes and deadbolt throws. As part of the strikes class within lock accessories, this component fills the specific role of receiving the deadbolt so the lock can perform as intended.

Deadbolt Strike Details That Support Install Work

• The strike plate is specified for use with deadbolt locks, so it pairs with deadbolt lock bodies and lets the bolt seat into a fixed metal edge, which supports secure lock engagement on cabinet or casework doors.
• The Z shape construction controls how the strike projects from the mounting surface, so the deadbolt can line up with the formed edge, which helps installers match the throw distance on locks designed around this offset.
• The 1/2 dp detail indicates a half-depth profile in the strike geometry, which positions the receiving surface for the bolt at a defined setback, giving fabricators a predictable interface when laying out doors and frames.
• The black finish aligns with black lock hardware from CompX Timberline Lock, so the visible edge of the strike blends with matching components, which matters on exposed cabinet faces or fixture fronts.

Strike Plate Fit, Fastening, And Lock Alignment

The strike plate is sold without screws, and it is specified to use #6 x 1/2 panhead screws, so installers can select the correct thread and length for the substrate while staying within the intended fastening design. Using #6 x 1/2 panhead screws matches the hole sizing and material thickness of the strike, which helps the plate seat flat without distortion as it is tightened. Because this SP-256 strike is built for deadbolt locks, the mounting position can be laid out so the deadbolt throw lands squarely on the Z shape edge, which supports smooth latching and reduces drag on the bolt. The 1/2 dp geometry is fixed, so once the mounting reference is established, repeat installations on similar doors or panels can maintain the same alignment.

Using The SP-256-3 Strike Plate In Lock Projects

Where This Z Shape Strike Plate Is Applied

This strike plate sits within the locks and latches family as a strike, so it functions as the receiving component that a deadbolt lock engages against. In projects using CompX Timberline Lock deadbolt locks, the SP-256-3 part number identifies a Z shape strike plate, which helps shops specify the correct mating part when building or servicing cabinet and fixture locks. The 1/2 dp configuration defines how far the working edge of the strike sits from the mounting surface, so installers can position the strike to suit doors or panels that close to a known reveal. The black finish supports use on dark or black-finished casework where visible hardware needs to match the surrounding components from the same lock system.

Why SP-256 Strike Details Matter In Use

The Z shape on this strike plate controls the offset between the mounting plane and the impact edge, so the deadbolt can run into a formed lip rather than a flat plate, which supports positive seating and helps the lock feel consistent in operation. When the bolt lands on the 1/2 dp geometry, the depth of engagement is defined by the strike form instead of field bending, giving repeatable results between multiple doors built to the same layout. Specifying the SP-256-3 manufacturer part number ties the strike directly to the CompX Timberline Lock system, which helps reduce rework caused by mixing components from different strike geometries. Because the product is described as a strike plate for use with deadbolt locks, its role in the hardware assembly is clear: it is the fixed part that receives the deadbolt and completes the locking function on cabinets, cases, or similar structures.

Common Questions About SP-256 Strike Plate Black

Selecting This Strike Plate For Deadbolt Lock Jobs

The SP-256 strike plate black from CompX Timberline Lock offers a defined Z shape with 1/2 dp geometry for deadbolt locks, so it gives installers a known offset when planning cabinet or fixture lock details. By using the specified #6 x 1/2 panhead screws with this strike, the plate seats to its intended profile while supporting the bolt on a formed lip. For projects built around CompX Timberline Lock deadbolt hardware, selecting the SP-256-3 strike plate creates a direct match between lock body and strike geometry, helping keep deadbolt engagement consistent across multiple doors.