Concealed Cabinet Levelers 1/2 in x 2-7/8 in

Concealed Cabinet Levelers For Stable Furniture Support

Concealed Cabinet Levelers from Camar are one piece heavy duty levelers designed for cabinets, furniture, work surfaces, and tables, so they support casework where appearance and stability both matter. The leveler uses a 1/2 inch diameter, matching the 12mm diameter specification, which concentrates the load through a robust stem for dependable support under everyday use. The 2-7/8 inch height gives you a tall adjustment range to handle uneven floors and shimming situations in shops, offices, or residential installs. These levelers are part of the Leg Levellers and Toe kicks product class, so they integrate naturally into cabinetry bases and toe spaces. Two diameter sizes are available, 9/16 inch and 1/2 inch, which lets you standardize on one system across different cabinet lines while still matching the bore size you prefer. A minimum panel thickness of 3/4 inch is required, tying the product directly to common cabinet construction.

Key Leveler Details That Support Real Jobs

• The one piece heavy duty design creates a solid load path, so the leveler resists flexing when cabinets or furniture are repositioned after installation.
• The 12mm (1/2 inch) diameter stem geometry fits a precise bore, which helps keep the leveler seated square in the panel for consistent alignment across multiple units.
• The 2-7/8 inch overall height provides useful vertical travel, letting you correct for floor variations while keeping toe kicks and reveals visually consistent from cabinet to cabinet.
• The concealed layout places the leveler inside the cabinet or toe area, which keeps the support hardware out of sight while still letting the cabinet carry significant loads.
• Levelers are classified as Work Surface & Tables and Cabinet/Furniture Levelers, so they adapt to different projects where finished height and stability must match across connected pieces.
• The levelers provide either 1 inch or 3/8 inch of adjustment, giving you two distinct adjustment ranges for fine tuning or larger corrections, depending on the installation conditions.

Adjustment Access And Panel Requirements For Installers

The minimum panel thickness of 3/4 inch is required to use these levelers, so they align with standard cabinet sides and base panels without forcing design changes. This thickness gives enough material around the 12mm bore to hold the leveler securely during loading and movement. Adjustment is accessible with a hex key or screwdriver, so installers can work from inside the cabinet or toe space using common tools already on site. That tool flexibility helps during tight installs, where a screwdriver might reach more easily than a hex key, or vice versa. The combination of 2-7/8 inch height and defined adjustment ranges means you can dial in finished heights accurately without reworking cabinet parts.

Using These Camar Levelers In Cabinet Projects

Where This Concealed Leveler Is Typically Applied

This Camar concealed cabinet leveler sits in the Leg Levellers and Toe kicks class, so it is well suited for base cabinets where the support point needs to hide behind a toe front. In work surface and table applications, the 2-7/8 inch height helps bridge variations between floor and underside of the top, which is important when aligning multiple units in a run. The 12mm (1/2 inch) diameter stem suits panels designed for metric or fractional bores that are close in size, so casework using 3/4 inch sides can accept the leveler without excess play. Because two diameter sizes, 9/16 inch and 1/2 inch, are available across this line, shops can match the bore size to their drilling setup while keeping the same concealed leveling concept throughout a project. The minimum 3/4 inch panel requirement keeps the bore centered in material that is thick enough to hold threads and geometry during cabinet moves.

Why Adjustment And Heavy Duty Design Matter In Use

The one piece heavy duty construction means the leveler is built so it will not bend when moving furniture, which directly reduces callbacks caused by racked cabinets after relocation. That strength lets installers slide or shift loaded casework within a space while still relying on the existing level setting. The levelers provide 1 inch or 3/8 inch of adjustment, so runs of cabinets can be tuned to laser or level readings even when slabs or subfloors are inconsistent. With adjustment accessible by hex key or screwdriver, field crews can choose whichever tool reaches best through narrow openings or around toe fronts, shortening setup time. The concealed configuration keeps the visible toe line clean while still giving access to the adjustment interface, which is valuable when aligning work surfaces and tables in client-facing areas. A drill template and drill bits are available for this line, supporting repeatable hole location so multiple cabinets share the same reference and height behavior across a job.

Common Questions About This Concealed Leveler

Selecting This Leveler For Cabinet And Table Projects

Choosing this Concealed Cabinet Levelers, One Piece Heavy Duty 1/2 inch Diameter x 2-7/8 inch Height from Wurth Baer Supply gives you a Camar component built around 12mm stems, 3/4 inch panel use, and hex key or screwdriver adjustment. The combination of concealed layout, defined 1 inch or 3/8 inch adjustment ranges, and one piece heavy duty construction helps support cabinets, work surfaces, and tables where clean lines and stable alignment matter. Use this leveler when a concealed support, matched to standard 3/4 inch construction and precise drilled holes, will streamline setup across your next installation run.