Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
80mm matte chrome grommet describes this Custom Accents metal cap grommet that fits round 3-1/16 inch diameter bore holes, so it suits standard drilled openings used for desktops, workstations, or multimedia furniture. The design pairs a metal grommet cap with a plastic liner, giving a hard-wearing metal surface at the top while the liner nests inside the bore hole. Caps slide open from the middle to both sides, creating a 1-3/4 inch wide opening that lets cables and wires pass through without cutting a larger hole. When you do not need the full width, the closed cap leaves a 5/8 inch wide opening that guides fewer wires in a more controlled path. Black brush material across this opening helps visually conceal the wire pass-through on finished surfaces. A 5/16 inch lip on the cap rests on the surface top, creating a defined edge around the bore hole.
This Custom Accents grommet is designed around a round 3-1/16 inch diameter bore hole, so once that opening is drilled, the plastic liner drops into the hole and establishes the internal boundary. The metal cap then sits over the liner, and its 5/16 inch lip rests directly on the surface top to cover the cut edge. Because the caps slide open from the middle, you can position the 1-3/4 inch wide opening where cable traffic is heaviest. When fewer cables are needed, the closed configuration leaves a 5/8 inch wide brush-lined slot that guides those wires while leaving the rest of the hole covered.
This grommet belongs to the grommets product class and is supplied under the Custom Accents brand, so it is aimed at shelf, closet, garage organization, and multimedia or workspace components where a finished wire pass-through is required. The required round 3-1/16 inch diameter bore holes align with typical hole sizes in desks and countertops, making the SAP-described donut 80mm matte chrome format suitable for horizontal work surfaces. The plastic grommet liner occupying the bore helps shield the panel material from cable abrasion, which supports use in composite or laminated panels. The metal cap in matte chrome presents a uniform metal ring around the opening, which coordinates with other metal hardware on cabinetry or office furniture. Because these grommets can be used with the "verterbrae" wire management system, they work naturally at the top of a vertical cable routing column.
The caps that slide open from the center to both sides provide a variable access opening, so installers can open the grommet to 1-3/4 inches when feeding plugs, power bricks, or bundled harnesses through the work surface. After the initial pull, the cap can be returned toward the closed position, where the 5/8 inch wide opening focuses the cable bundle into a narrower channel. Black brush material across this opening helps make the wire opening less conspicuous, which benefits customer-facing workstations or display cabinetry. The 5/16 inch lip sitting on the surface top defines a fixed reference edge, so repeated installations across multiple panels maintain a consistent appearance. Being able to connect the grommet location to a "verterbrae" wire management system also supports a predictable routing path from the work surface down to lower cabinets or floor level.
The Specialty Grommets 1 Piece Metal CPF-04-80-30-CV requires round 3-1/16 inch diameter bore holes, so drilling that size prepares the panel for proper seating.
The grommet cap slides open from the middle to both sides, giving a 1-3/4 inch wide opening for routing larger plugs and can be closed to leave a 5/8 inch wide brush-lined slot.
The black brush material spans the closed 5/8 inch opening, helping make the wire opening less conspicuous while guiding cables through the desk or surface.
The grommet cap has a 5/16 inch lip that sits on the surface top, covering the cut edge of the 3-1/16 inch bore hole for a finished perimeter.
This Custom Accents grommet can be used with the "verterbrae" wire management system, linking the desk opening directly to a vertical cable path.
The Specialty Grommets 1 Piece Metal CPF-04-80-30-CV uses a plastic grommet liner combined with a metal grommet cap, pairing internal protection with a metal surface finish.
The Specialty Grommets 1 Piece Metal Custom Accents CPF-04-80-30-CV brings together an 80mm matte chrome metal cap, a plastic liner, and a sliding cap design, so a 3-1/16 inch bore hole turns into a controlled cable pass-through point. The 1-3/4 inch open position helps pull through connector heads, while the 5/8 inch brush-lined slot manages daily cable use. The 5/16 inch surface lip and compatibility with the "verterbrae" wire management system tie drilled openings into an organized routing layout. For desks, counters, or multimedia cabinetry that demand both cable access and a defined metal trim ring, this grommet provides a focused solution.
Sold In: 1 Each