3"/96mm Skyline Handle Pull, Matte Black

3"/96mm Skyline Handle Pull Matte Black Use

3"/96mm Skyline Handle Pull Matte Black identifies this Berenson Corporation pull as a cabinet handle designed around 3 inch and 96mm center-to-center mounting, so it works in layouts built to either measurement standard without changing drilling positions. The Skyline name ties it to the Skyline collection, helping match this pull visually across a run of cabinets when project specs call for consistent style. Its matte black finish gives a non-reflective look, which helps this pull sit quietly against many cabinet colors on jobs where subtle hardware is preferred. The pull is made from zinc, giving a metal construction that supports everyday cabinet opening and closing in kitchens, baths, and built-ins. A projection of 1-1/16 inch provides finger clearance in front of the cabinet face, so doors and drawers can be gripped without hands dragging the surface.

Key Skyline Pull Details For Cabinet Work

• The 3 inch and 3-3/4 inch center-to-center measurements provide two mounting options on the same pull, which helps align with existing bore patterns or templates set up for either spacing during cabinet work.
• The 4-13/16 inch overall length defines the span of the pull on the face, which helps plan visual proportions on drawer fronts and door rails when laying out multiple handles in a row.
• The width of 5/8 inch gives the grip a defined edge across the hand, which matters when selecting a pull that feels neither too narrow nor bulky on frequently used cabinet fronts.
• The 13/16 inch base diameter describes the footprint at each mounting point, which helps assess coverage over previous hardware marks or finish wear around existing holes.
• The 1-1/16 inch projection sets how far the pull stands off the cabinet surface, which is important for clearing door profiles and providing enough space for fingers behind the handle.

Mounting Dimensions For Skyline Matte Black Pull

The center-to-center options of 3 inch and 3-3/4 inch on this Skyline pull define the distance between mounting points, which is critical when aligning to pre-drilled cabinet holes or boring patterns used on the job. Its 4-13/16 inch overall length allows installers to visualize how much of the drawer or door face the handle will span, supporting consistent placement across different cabinet sizes. A base diameter of 13/16 inch at each end shows how much surface the pull covers around each hole, which helps when replacing older pulls where finish ghosts may be present. The specified width of 5/8 inch and projection of 1-1/16 inch combine to describe the hand clearance and grip surface off the face, supporting layout choices near adjacent doors, walls, or tall cabinet stiles.

Using The Skyline Cabinet Pull In Projects

Where This Skyline Matte Black Pull Fits

This Berenson Corporation Skyline pull is part of the Decorative Hardware & Moldings category under Handles and Pulls, so it is suited to cabinet and furniture front applications where a handle is required. The matte black finish works on modern and transitional cabinet designs where a dark, even tone is specified for hardware. With a center to center listed as 3 inch and 3-3/4 inch, the pull fits layouts that are built around either standard spacing, so it can be applied to new cabinets drilled to 3 inch or to fronts bored for 3-3/4 inch. The 4-13/16 inch length allows it to span smaller doors and drawers without visually dominating, which is useful in kitchens and built-ins with tight drawer stacks or narrow rails.

Details That Support Consistent Cabinet Results

The combination of 3 inch and 96mm center-to-center options on this Skyline cabinet pull supports projects that might reference either imperial or metric specifications, which can simplify coordination across drawings, orders, and shop work. Its zinc construction provides a uniform base material for the matte black finish, supporting a consistent appearance across multiple pulls on large runs. The 1-1/16 inch projection keeps the gripping surface out from the cabinet face, helping maintain knuckle clearance when mounted on doors with profiled edges or thicker applied fronts. A 13/16 inch base diameter at each mounting point helps each foot sit solidly on the surface, which matters when aligning pulls in straight lines across banks of drawers. The 5/8 inch width defines the front face size of the handle, so installers can match it to surrounding hardware scale, such as knobs or longer pulls from the Skyline collection, for a coordinated look.

Common Questions About The Skyline Handle Pull

Selecting This Skyline Pull For Your Cabinets

The 3"/96mm Skyline Handle Pull Matte Black from Berenson Corporation brings a zinc construction, a matte black finish, and dual center-to-center options of 3 inch and 3-3/4 inch to cabinet projects. Its 4-13/16 inch length, 5/8 inch width, and 1-1/16 inch projection define how it will sit and feel on doors and drawers. For jobs running the Skyline collection or specifying matte black hardware, this pull provides consistent dimensions and finish that support clean, repeatable layouts across the space.