Berenson Skyline Series 6-5/16" (160 mm) Center to Center Brushed Nickel Pull, - 9203-1BPN-P

Berenson Skyline Brushed Nickel Pull For Cabinets

Berenson Skyline brushed nickel pull gives cabinet and drawer fronts a defined, linear look using the Skyline collection design, which helps installers match this pull with other pieces from the same series on a project. The pull is made from zinc die cast, so it offers a solid metal feel that supports everyday cabinet and drawer use in kitchens, baths, and shop-built furniture. Its brushed nickel finish softens reflected light, which helps fingerprints and minor marks blend into the surface during regular handling. The center to center dimension is 6-5/16 inches (160 mm), providing a longer grip span that suits wider cabinet doors or drawers needing more hand clearance. Overall length is 6-11/16 inches, so the pull visually covers the drilling pattern with some overhang at each end. Projection is 1-1/16 inches, giving fingers space behind the pull while keeping fronts from feeling bulky.

Key Skyline Pull Details That Support Projects

• The 6-5/16 inch (160 mm) center to center drilling size matches a common cabinet pull layout, which lets installers reuse existing holes on many doors and drawers during hardware updates.
• The 6-11/16 inch overall length extends slightly beyond the hole spacing, which visually balances the pull on wider fronts and helps align multiple pulls along a run of cabinets.
• The 1-1/16 inch projection keeps the pull standing off the surface enough for a comfortable grip, while still staying tight to the face so clothing is less likely to catch during daily use.
• The 5/8 inch width offers a slim front profile that sits neatly on narrow drawer rails, yet still provides enough surface area for stable mounting and a consistent reveal line.
• The base dimensions of 1-1/16 inch at each end spread contact over more area, which supports the load at the screw points and helps the pull sit flush against the cabinet face.
• The brushed nickel finish pairs with many hinge and faucet finishes, which simplifies visual coordination across kitchens or baths using other brushed nickel decorative hardware.

Mounting And Fit Details For This Skyline Pull

The Skyline pull is built with a 6-5/16 inch (160 mm) center to center dimension, so it lines up with that exact hole spacing on cabinet and drawer fronts and sets the mounting layout for drilling new work. Its zinc die cast construction provides a rigid body around the mounting posts, supporting repeated opening and closing without flexing at the screws. The 1-1/16 inch base dimensions at each end establish a defined footprint on the surface, which helps installers position the pull consistently relative to edges and rail widths. With a projection of 1-1/16 inches from the front, the pull creates finger clearance behind the bar while still keeping the hardware close enough to avoid feeling obtrusive on tight walkway runs.

Using The Skyline 160mm Pull In Cabinet Work

Where The Berenson Skyline Brushed Nickel Pull Fits

This Skyline pull belongs to the Skyline collection, so it fits projects where a consistent, straight-line hardware style is used across doors and drawers. The 6-5/16 inch (160 mm) center to center size suits wider cabinet doors and medium-to-large drawers that benefit from a longer hand contact area. With a total length of 6-11/16 inches, the pull spans more of the front, which helps visually anchor larger drawer faces and keeps multiple pulls looking proportional along cabinet runs. The brushed nickel finish works on residential and shop-built cabinetry where a muted metal tone is preferred, supporting designs that coordinate with brushed nickel hinges, faucets, and other visible metal parts. Its 5/8 inch width lets this pull mount comfortably on face frames, slab doors, or narrow rails without overwhelming the front.

Details That Help Achieve Consistent Pull Alignment

The 6-5/16 inch (160 mm) center to center measurement gives installers a fixed reference when laying out drilling jigs, helping maintain the same spacing from door to door and drawer to drawer. Overall length of 6-11/16 inches creates a predictable overhang beyond the holes, which simplifies setting equal reveals at ends of doors or along wide drawer fronts when aligning multiple pulls. The 1-1/16 inch projection from the cabinet surface provides uniform stand-off across the run, which keeps shadow lines consistent and helps doors and drawers appear aligned even under varied lighting. Base dimensions of 1-1/16 inch at each mounting point define a stable contact area, so once the pull is tightened, the ends register solidly against the face for a clean, repeatable installation.

Common Questions About The Skyline 160mm Pull

Selecting This Skyline Pull For Your Next Job

The Skyline pull with 6-5/16 inch (160 mm) center to center drilling, 6-11/16 inch overall length, and 1-1/16 inch projection gives cabinet hardware layouts a defined, repeatable format. Its zinc die cast construction and brushed nickel finish support everyday use while keeping a consistent appearance across doors and drawers. With a 5/8 inch width and 1-1/16 inch base dimensions, it fits comfortably on many cabinet styles. For projects built around the Skyline collection look, this Berenson 9203-1BPN-P pull provides the measurements and finish needed to carry the same hardware line through an entire run of cabinets.