Berenson Skyline Series 8-13/16" (224 mm) Center to Center Polished Chrome Pull, - 9207-1026-P

Berenson Skyline Pull For Cabinets And Drawers

Berenson Skyline pull gives you a straight, modern handle for cabinets and drawers that matches the Skyline collection across a project. The pull is part of the Berenson Skyline collection, so it maintains consistent styling when you repeat it across doors and drawers. The 8-3/16 inch center to center dimension sets a fixed drill pattern that suits wider cabinet faces and longer drawer fronts. The overall 9-1/4 inch length provides hand space across the front, which helps when opening heavier or full-width drawers. The material is zinc die cast, which creates a solid, uniform piece that handles everyday cabinet use in kitchens, baths, or shop casework. The polished chrome finish gives a bright, reflective appearance that pairs with chrome faucets and hinges. The 5/8 inch width presents a slim front profile, which helps the pull sit visually light on the face while still giving enough gripping surface.

Key Skyline Pull Details For Daily Use

• The 8-3/16 inch center to center spacing establishes a standard hole layout that works well across multiple doors or drawers, which supports consistent drilling on a run of cabinets.
• The overall 9-1/4 inch length extends past the mounting points to give more grabbing area, which is useful on wider drawers where users may pull from different spots.
• The 1-1/16 inch projection sets how far the pull stands off the cabinet front, which leaves finger clearance behind the handle for a comfortable grip.
• The 5/8 inch width defines the narrow face of the pull, which keeps the look streamlined while still presenting enough surface for the hand to contact.
• The zinc die cast construction provides a single-piece body, which supports consistent feel from pull to pull in a kitchen or commercial run.
• The polished chrome finish creates a reflective surface, which visually ties in with other polished chrome hardware in the same space.

Mounting Dimensions And Fit For Skyline Pull

The Skyline cabinet pull uses an 8-3/16 inch center to center dimension, so the drilled holes on the door or drawer front align directly to that spacing. The 1-3/16 inch base dimensions define the footprint at each mounting point, which sets how much flat surface you need on the cabinet face for stable seating. The 1-1/16 inch projection controls how far the pull extends off the surface, which in turn affects both hand clearance and how far the handle reaches into the room. The zinc die cast body, combined with the polished chrome finish, gives a rigid feel at the mounting points, which helps the pull sit flush against flat cabinet faces. The combination of these measurements lets installers plan the layout and placement relative to door edges and adjacent hardware.

How This Berenson Skyline Pull Works In Projects

Where The Skyline Series Pull Performs Best

The Berenson Skyline Series 8-13/16 inch center to center polished chrome pull is suited to cabinet and drawer fronts that benefit from a longer handle. The 8-3/16 inch center to center measurement pairs well with wider face frames and full-overlay doors, giving a proportionate pull length along the edge. The 9-1/4 inch overall length helps when used on base cabinet drawers, where users may grab near the ends rather than the center. The zinc die cast material supports repeated opening and closing cycles in kitchens, bathrooms, and shop cabinetry where pulls see steady handling throughout the day. The polished chrome finish coordinates visually with polished chrome faucets, hinges, and other decorative hardware, which helps keep a unified look across a room or bank of cabinets. The 5/8 inch width keeps the pull visually lean, so it works on both narrow and wide fronts without overwhelming the design.

Details That Support Repeatable Install Results

The 8-3/16 inch center to center dimension on this Skyline cabinet pull establishes a fixed drilling template from one cabinet front to the next, which simplifies layout when you install multiple pulls in a line. The 1-3/16 inch base dimensions define the bearing area around each fastener hole, which helps the pull seat firmly on flat faces without rocking. The 1-1/16 inch projection sets repeatable standoff from the surface, so every handle in the run has the same hand clearance and visual depth. The zinc die cast construction provides a consistent body shape from unit to unit, which keeps alignment and spacing uniform along a cabinet bank. The polished chrome finish presents the same reflective surface on every pull in the Skyline collection, which supports a cohesive appearance across doors, drawers, and panels.

Buyer Questions About Berenson Skyline Pull Details

Selecting This Skyline Pull For Your Cabinets

The Berenson Skyline pull, with its 8-3/16 inch center to center dimension and 9-1/4 inch overall length, suits projects needing a longer polished chrome handle across multiple cabinets. The zinc die cast construction and polished chrome finish provide a consistent look and feel from piece to piece. With defined base dimensions, projection, and width, this Skyline cabinet pull gives installers clear measurements for layout on doors and drawers. Use these verified dimensions to align your handle runs and match the Skyline collection where a coordinated cabinet hardware layout is required.