Berenson Oak Park Series 6-5/16" (160 mm) Center to Center Verona Bronze Pull, - 9215-10VB-P

Berenson Oak Park Cabinet Pull For Cabinetry

Berenson Oak Park cabinet pull provides a 6-5/16 inch center to center grip that spaces screw holes consistently for cabinetry layouts, which helps keep handle alignment uniform across doors and drawers in a run. The pull is part of the Oak Park Collection from Berenson Corporation, so it brings a coordinated style option when matching other pieces from the same series. Its zinc die cast material creates a solid-feeling handle body that supports repeated daily use on frequently opened cabinets. The Verona Bronze finish gives the pull a specific bronze tone that sets the visual look of the installation, helping projects hit a targeted color palette. With a total length of 6-5/8 inch, the pull extends slightly beyond the drilled centers, which defines how much handle is visible across the cabinet face and influences the proportion on wider or narrower fronts.

Key Oak Park Pull Details For Projects

• The 6-5/16 inch center to center dimension sets the exact drilling pattern, which streamlines layout when repeating this pull across multiple cabinet doors and drawer fronts in the same job.
• The 6-5/8 inch overall length defines the span of visible hardware on the face, which helps match handle scale to cabinet widths for a balanced look on doors and drawers.
• The 1-1/4 inch projection establishes how far the pull stands off the cabinet surface, which affects finger clearance and how comfortably users can grab the handle in daily use.
• The 3/8 inch width and 3/8 inch base dimensions describe the bar and foot size, which influence the visual line weight on the front and how much space the pull occupies at each mounting point.
• The Verona Bronze finish identifies the surface color of the pull, which matters when coordinating with hinges, faucets, and other bronze-toned hardware in the same area.
• The zinc die cast construction specifies the base material, which supports a consistent shape and finish across multiple pulls within the same Oak Park Collection project.

Mounting Dimensions For Oak Park Cabinet Pull

The 6-5/16 inch center to center measurement of this Berenson Oak Park pull sets the screw hole spacing, which is critical when drilling new fronts or re-using existing 160 mm patterns on cabinetry. Its 1-1/4 inch projection from the cabinet face defines how much the pull stands proud of the door or drawer, directly affecting hand clearance when someone reaches from above or below. The pull length of 6-5/8 inch indicates how far the handle extends across the surface, which helps installers position it consistently relative to panel edges. With a 3/8 inch width and 3/8 inch base dimensions, the pull presents a slim footprint at the mounting points, which influences how it sits on the stile or rail and how much flat area it covers.

Using This Verona Bronze Pull In Cabinet Work

Where This Oak Park Series Pull Fits Best

This Oak Park Series cabinet pull, with a 6-5/16 inch center to center dimension, fits layouts designed around that specific drilling pattern, which is common on many mid-length cabinet and drawer fronts. The 6-5/8 inch overall length works well on doors and drawers where a moderate-length handle complements standard kitchen or bath cabinet widths, keeping the pull visually proportional to the face. Its 1-1/4 inch projection defines the stand-off from the surface, giving users space to wrap fingers behind the bar, which is useful on heavier drawers or tall pantry doors. The Verona Bronze finish ties the pull to projects calling for a bronze tone, which helps create a coordinated look with other decorative hardware and moldings in similar finishes. As part of the Berenson Oak Park Collection, this pull supports jobs where matching handles across different cabinet locations is important for a consistent appearance.

Why These Berenson 9215-10VB-P Details Matter

The Berenson 9215-10VB-P part number identifies this exact Oak Park pull configuration, which keeps ordering consistent when the same hardware is required across phases of a cabinetry project. The 160 mm center to center spacing (6-5/16 inch) allows precise hole drilling, which reduces rework when aligning multiple pulls along a row of drawers. The zinc die cast material creates a stable, repeatable form that helps each pull match the next in shape, which is important when installing a long bank of cabinets. The 3/8 inch width and base dimensions define the slender footprint at each mounting point, which can be helpful when working near panel edges or decorative profiles on the door frame. The Verona Bronze finish applied to this zinc die cast body sets the surface color that installers and designers reference, which simplifies matching additional Berenson hardware in the same finish for future expansions or replacements.

Common Questions About Oak Park Verona Bronze Pull

Selecting This Pull For Cabinet Installations

This zinc die cast cabinet handle in the Oak Park Collection combines a 6-5/16 inch center to center layout with a Verona Bronze finish, so it suits projects built around that drilling pattern and color. The 6-5/8 inch length, 1-1/4 inch projection, and 3/8 inch width define its on-door footprint, helping installers match it to cabinet sizes and user grip preferences. For cabinetry work that calls for Berenson Oak Park styling in a defined bronze tone, this pull provides a clearly specified option by part number 9215-10VB-P.