Berenson Oak Park Series 6-5/16" (160 mm) Center to Center Vintage Nickel Pull, - 9216-1VTN-P
Description
Berenson Oak Park Pull 160mm For Cabinets
Berenson Oak Park pull 160mm gives you a cabinet handle sized for 6-5/16 inch center to center hole spacing, so it matches standard 160 mm layouts on many face frames and doors. The pull is part of the Oak Park collection, which keeps styling consistent when you are laying out multiple doors and drawers in the same run. Its zinc die cast construction creates a solid-feeling handle body, useful when doors see regular daily use in kitchens or shops. The vintage nickel finish presents a muted metal tone that suits projects calling for a traditional or transitional look. Overall length of 6-5/8 inches means the grip extends slightly beyond the mounting holes, giving room for fingers to clear the cabinet face. A projection of 1-1/4 inches sets the handle off the door enough for a comfortable grasp without sticking out excessively into walkways.
Key Oak Park Pull Details For Daily Use
- The 6-5/16 inch (160 mm) center to center spacing aligns with common drilling patterns, reducing layout changes when working on standard cabinets or replacing existing pulls.
- The zinc die cast material forms a rigid pull body, which supports repetitive opening and closing on frequently used cabinet doors or drawer fronts.
- The vintage nickel finish provides a subdued metallic look, helping this pull blend with other nickel-toned decorative hardware in the same space.
- The 6-5/8 inch overall length gives a longer gripping area, which can be helpful on wider drawer fronts or tall pantry doors that benefit from more hand contact.
- The 1-1/4 inch projection stands the pull away from the cabinet surface, creating finger clearance while still keeping the profile relatively tight to the face.
- The 3/8 inch width and 3/8 inch base dimensions create a narrow footprint, which matters when working on slim rails or when visual lightness is preferred on the door.
Installation Dimensions And Fit For This Pull
This Oak Park pull uses a 6-5/16 inch (160 mm) center to center dimension, which defines where the two mounting holes land on the cabinet face during layout. The 8-32 x 1 inch screw size sets the thread and length used for fastening, which is important when you are drilling and tapping or working with standard cabinet door thicknesses. With a projection of 1-1/4 inches, the pull sets off the face enough that fingers can wrap behind the grip without contacting the door edge. The 3/8 inch width and matching 3/8 inch base footprint keep the contact area narrow, which can be useful on small rails or narrow stile sections where space is limited.
Using This Vintage Nickel Pull In Projects
Where The 6-5/16 Inch Pull Works Best
This Berenson Oak Park series pull fits cabinets drilled for a 6-5/16 inch (160 mm) center to center spread, which suits many metric-based cabinet layouts. On drawer fronts, the 6-5/8 inch overall length gives you a balanced proportion across medium-width fronts, helping the handle look properly sized to the piece. On doors, the 1-1/4 inch projection combines with the 3/8 inch width to create a slim grip that still stands off the surface, so hands clear the door edge during operation. The vintage nickel finish lets the pull coordinate with other vintage nickel decorative hardware, so a full kitchen, bath, or shop run can share a consistent metal tone. Because the pull belongs to the Oak Park collection, it supports projects using multiple Oak Park pieces in different sizes while keeping the design language unified.
Details That Support Consistent Cabinet Results
The 160 mm center to center measurement provides a fixed drilling reference, allowing hole placement to be repeated across banks of doors and drawers for uniform alignment. Using the specified 8-32 x 1 inch screw size ties the pull to a common fastener standard in cabinet work, which helps maintain consistency across multiple hardware positions. The 3/8 inch base dimension keeps each mounting point compact, so the pull seats on rails or narrow stile areas without overhanging decorative profiles. With a 6-5/8 inch total length, each handle spans enough of the panel to distribute hand contact, supporting comfortable use on heavier fronts. The zinc die cast construction gives the pull a single-piece molded structure, giving the handle a solid feel when gripped. The vintage nickel finish completes the appearance, aligning the visible metal with other vintage nickel elements in the same room or installation.
Common Oak Park Vintage Nickel Pull Questions
What center to center size is this Oak Park pull?
The Berenson Oak Park series pull has a 6-5/16 inch, or 160 mm, center to center dimension, so hole spacing follows that measurement across cabinet doors or drawer fronts.
What are the overall dimensions of the 9216-1VTN-P pull?
The 9216-1VTN-P pull has a 6-5/8 inch overall length, a 1-1/4 inch projection, a 3/8 inch width, and 3/8 inch base dimensions, shaping how it sits and feels on the cabinet face.
What material and finish does this cabinet pull use?
This cabinet pull uses zinc die cast material with a vintage nickel finish, combining a molded metal body with a muted nickel tone for decorative hardware projects.
Which screw size is specified for installing this pull?
This Oak Park pull is specified with 8-32 x 1 inch screws, aligning the threads and length with common cabinet fastening practice for this type of handle.
How far does this vintage nickel pull project from the door?
The vintage nickel pull has a 1-1/4 inch projection, setting the grip far enough off the cabinet surface for finger clearance while keeping a relatively low profile.
What collection and brand is this 160mm cabinet pull?
This 160 mm cabinet pull is from the Oak Park collection by Berenson Corporation, tying it to a defined family of decorative handles and pulls.
Select This Oak Park Pull For Matching Layouts
The Oak Park pull with 6-5/16 inch (160 mm) center to center spacing, 6-5/8 inch length, and 1-1/4 inch projection gives you defined dimensions for planned cabinet layouts. With zinc die cast construction, vintage nickel finish, and 3/8 inch width, it suits projects that call for a slim, consistent handle profile across multiple doors and drawers.