Berenson Oak Park Series 6-5/16" (160 mm) Center to Center Brushed Nickel Pull, - 9217-1BPN-P

Berenson Oak Park Pull 160mm For Cabinets

Berenson Oak Park pull 160mm describes a Berenson Corporation cabinet handle from the Oak Park collection that uses a 6-5/16 inch center to center hole spacing, so it matches layouts drilled on that common cabinet pull standard. The pull is made from zinc die cast material, which gives a solid metal construction that supports repeated daily cabinet opening in kitchens, baths, or built-ins. Its brushed nickel finish provides a muted metallic look that works well where a non-gloss surface is preferred. The overall length of 6-5/8 inches means the handle extends past the mounting holes to give comfortable grip area along the front of a door or drawer. A projection of 1-1/4 inches sets the front of the pull away from the cabinet face, allowing fingers to wrap behind it. The 3/8 inch width keeps the profile slim across the front for a clean, linear appearance on the cabinet surface.

Key Oak Park Pull Details For Projects

• The 6-5/16 inch center to center dimension follows the sizing in the product name and web description, so installers can align this pull with existing 160 mm drilling patterns on cabinet doors or drawer fronts during replacement work.
• The 6-5/8 inch overall length from the web description gives a slight overhang past the hole spacing, providing extra bar length for gripping while keeping the pull proportional on standard cabinet widths.
• The 1-1/4 inch projection defined in the web description sets the stand-off from the cabinet face, allowing space behind the pull for fingers while keeping the handle close enough to avoid catching on clothing.
• The 3/8 inch width and 3/8 inch base dimensions from the web description create a narrow footprint, which helps the pull sit neatly on face frames or slab fronts and keeps visual lines tight on modern or transitional designs.
• The brushed nickel finish listed in the web description gives a soft metallic tone, supporting use in projects where a low-sheen surface is preferred over polished metal to help reduce visible fingerprints.
• The zinc die cast material specified in the web description provides a metal body, supporting firm attachment to the cabinet and consistent feel when opening and closing doors or drawers.

Installation Sizing And Hole Layout Fit

This Oak Park cabinet pull uses a 6-5/16 inch center to center measurement, directly matching the 160 mm spacing called out in the product information, so it fits projects drilled on that metric or imperial pattern. The overall 6-5/8 inch length creates a modest extension beyond the holes, which helps align the pull visually along rail or stile edges without crowding nearby hardware. With a 1-1/4 inch projection, the handle stands far enough off the door or drawer front to give room for a full hand grip. The 3/8 inch width and 3/8 inch base dimensions keep contact points compact on the surface, which can be helpful when working near panel details or narrow rails.

Using This Brushed Nickel Pull In Work

Where The Berenson Oak Park Pull Fits Best

The Oak Park pull from Berenson Corporation is categorized as decorative hardware in handles and pulls, aligning it with cabinet, furniture, and built-in millwork applications where a mounted handle is needed. Its 6-5/16 inch center to center size supports use on medium-width doors and drawers that benefit from a longer grip bar. The brushed nickel finish ties into projects calling for a neutral metal tone that coordinates with many hinge and faucet finishes. Because the pull is zinc die cast, it brings a metal feel suitable for residential or light commercial cabinetry that sees regular opening and closing throughout the day. The slim 3/8 inch width allows the pull to sit comfortably on narrow frames, Shaker rails, or slab fronts without overpowering the door style.

Details That Support Repeatable Mounting Results

The clearly defined 6-5/16 inch (160 mm) center to center spacing gives installers a reliable drilling dimension, which helps keep handle alignment consistent across multiple doors and drawers in a run. The 6-5/8 inch overall length creates a predictable margin beyond the screw centers, aiding layout when aligning pulls relative to panel edges or appliance reveals. The 1-1/4 inch projection establishes a repeatable stand-off distance from the cabinet face, so users experience the same finger clearance across an entire kitchen or bath. With the base dimensions held to 3/8 inch, the contact area at each mounting point remains small, which can simplify positioning near profile lines or decorative edges. The zinc die cast construction gives the pull a solid body around the mounting area, supporting a stable feel once attached to the cabinet front.

Common Questions About This Oak Park Pull

Selecting This Pull For Cabinet Projects

The Berenson Oak Park Series 6-5/16 inch center to center brushed nickel pull combines a zinc die cast body with a 6-5/8 inch overall length, 1-1/4 inch projection, and slim 3/8 inch width. Those dimensions help it fit medium-width cabinet doors and drawers where a longer, comfortable grip is needed without adding bulk. For projects built around the 160 mm drilling pattern, this pull offers a straightforward match that keeps layouts consistent across the run. Add this Oak Park pull to projects that call for a brushed nickel metal handle with clearly defined sizing for repeatable cabinet installations.